diff --git a/components/drivers/Kconfig b/components/drivers/Kconfig index cfb01728534..b7112d9ea63 100755 --- a/components/drivers/Kconfig +++ b/components/drivers/Kconfig @@ -1,942 +1,35 @@ menu "Device Drivers" -config RT_USING_DM - bool "Enable device driver model with device tree" - default n - help - Enable device driver model with device tree (FDT). It will use more memory - to parse and support device tree feature. - -source "$RTT_DIR/components/drivers/ipc/Kconfig" - -menuconfig RT_USING_SERIAL - bool "USING Serial device drivers" - select RT_USING_DEVICE_IPC - select RT_USING_DEVICE - default y - - if RT_USING_SERIAL - choice - prompt "Choice Serial version" - default RT_USING_SERIAL_V1 - config RT_USING_SERIAL_V1 - bool "RT_USING_SERIAL_V1" - config RT_USING_SERIAL_V2 - bool "RT_USING_SERIAL_V2" - endchoice - config RT_SERIAL_USING_DMA - bool "Enable serial DMA mode" - default y - - config RT_SERIAL_RB_BUFSZ - int "Set RX buffer size" - depends on !RT_USING_SERIAL_V2 - default 64 - endif - -config RT_USING_CAN - bool "Using CAN device drivers" - default n - -if RT_USING_CAN - config RT_CAN_USING_HDR - bool "Enable CAN hardware filter" - default n - config RT_CAN_USING_CANFD - bool "Enable CANFD support" - default n -endif - -config RT_USING_CPUTIME - bool "Enable CPU time for high resolution clock counter" - default n - help - When enable this option, the BSP should provide a rt_clock_cputime_ops - for CPU time by: - const static struct rt_clock_cputime_ops _ops = {...}; - clock_cpu_setops(&_ops); - - Then user can use high resolution clock counter with: - - ts1 = clock_cpu_gettime(); - ts2 = clock_cpu_gettime(); - - /* and get the ms of delta tick with API: */ - ms_tick = clock_cpu_millisecond(t2 - t1); - us_tick = clock_cpu_microsecond(t2 - t1); - -if RT_USING_CPUTIME - config RT_USING_CPUTIME_CORTEXM - bool "Support Cortex-M CPU" - default y - depends on ARCH_ARM_CORTEX_M0 || ARCH_ARM_CORTEX_M3 || ARCH_ARM_CORTEX_M4 || ARCH_ARM_CORTEX_M7 - select PKG_USING_PERF_COUNTER - config RT_USING_CPUTIME_RISCV - bool "Use rdtime instructions for CPU time" - default y - depends on ARCH_RISCV64 - help - Some RISCV64 MCU Use rdtime instructions read CPU time. - config CPUTIME_TIMER_FREQ - int "CPUTIME timer freq" - default 0 -endif - -config RT_USING_I2C - bool "Using I2C device drivers" - default n - -if RT_USING_I2C - config RT_I2C_DEBUG - bool "Use I2C debug message" - default n - - config RT_USING_I2C_BITOPS - bool "Use GPIO to simulate I2C" - default y - - if RT_USING_I2C_BITOPS - config RT_I2C_BITOPS_DEBUG - bool "Use simulate I2C debug message" - default n - endif - - config RT_USING_SOFT_I2C - bool "Use GPIO to soft simulate I2C" - default n - select RT_USING_PIN - select RT_USING_I2C_BITOPS - if RT_USING_SOFT_I2C - config RT_USING_SOFT_I2C1 - bool "Enable I2C1 Bus (software simulation)" - default y - if RT_USING_SOFT_I2C1 - config RT_SOFT_I2C1_SCL_PIN - int "SCL pin number" - range 0 32767 - default 1 - config RT_SOFT_I2C1_SDA_PIN - int "SDA pin number" - range 0 32767 - default 2 - config RT_SOFT_I2C1_BUS_NAME - string "Bus name" - default "i2c1" - config RT_SOFT_I2C1_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C1_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C2 - bool "Enable I2C2 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C2 - config RT_SOFT_I2C2_SCL_PIN - int "SCL pin number" - range 0 32767 - default 3 - config RT_SOFT_I2C2_SDA_PIN - int "SDA pin number" - range 0 32767 - default 4 - config RT_SOFT_I2C2_BUS_NAME - string "Bus name" - default "i2c2" - config RT_SOFT_I2C2_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C2_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C3 - bool "Enable I2C3 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C3 - config RT_SOFT_I2C3_SCL_PIN - int "SCL pin number" - range 0 32767 - default 5 - config RT_SOFT_I2C3_SDA_PIN - int "SDA pin number" - range 0 32767 - default 6 - config RT_SOFT_I2C3_BUS_NAME - string "Bus name" - default "i2c3" - config RT_SOFT_I2C3_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C3_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C4 - bool "Enable I2C4 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C4 - config RT_SOFT_I2C4_SCL_PIN - int "SCL pin number" - range 0 32767 - default 7 - config RT_SOFT_I2C4_SDA_PIN - int "SDA pin number" - range 0 32767 - default 8 - config RT_SOFT_I2C4_BUS_NAME - string "Bus name" - default "i2c4" - config RT_SOFT_I2C4_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C4_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C5 - bool "Enable I2C5 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C5 - config RT_SOFT_I2C5_SCL_PIN - int "SCL pin number" - range 0 32767 - default 9 - config RT_SOFT_I2C5_SDA_PIN - int "SDA pin number" - range 0 32767 - default 10 - config RT_SOFT_I2C5_BUS_NAME - string "Bus name" - default "i2c5" - config RT_SOFT_I2C5_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C5_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C6 - bool "Enable I2C6 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C6 - config RT_SOFT_I2C6_SCL_PIN - int "SCL pin number" - range 0 32767 - default 11 - config RT_SOFT_I2C6_SDA_PIN - int "SDA pin number" - range 0 32767 - default 12 - config RT_SOFT_I2C6_BUS_NAME - string "Bus name" - default "i2c6" - config RT_SOFT_I2C6_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C6_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C7 - bool "Enable I2C7 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C7 - config RT_SOFT_I2C7_SCL_PIN - int "SCL pin number" - range 0 32767 - default 13 - config RT_SOFT_I2C7_SDA_PIN - int "SDA pin number" - range 0 32767 - default 14 - config RT_SOFT_I2C7_BUS_NAME - string "Bus name" - default "i2c7" - config RT_SOFT_I2C7_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C7_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - config RT_USING_SOFT_I2C8 - bool "Enable I2C8 Bus (software simulation)" - default n - if RT_USING_SOFT_I2C8 - config RT_SOFT_I2C8_SCL_PIN - int "SCL pin number" - range 0 32767 - default 15 - config RT_SOFT_I2C8_SDA_PIN - int "SDA pin number" - range 0 32767 - default 16 - config RT_SOFT_I2C8_BUS_NAME - string "Bus name" - default "i2c8" - config RT_SOFT_I2C8_TIMING_DELAY - int "Timing delay (us)" - range 0 32767 - default 10 - config RT_SOFT_I2C8_TIMING_TIMEOUT - int "Timing timeout (tick)" - range 0 32767 - default 10 - endif - endif -endif - -config RT_USING_PHY - bool "Using ethernet phy device drivers" - default n - -config RT_USING_ADC - bool "Using ADC device drivers" - default n - -config RT_USING_DAC - bool "Using DAC device drivers" - default n - -config RT_USING_NULL - bool "Using NULL device drivers" - default n - -config RT_USING_ZERO - bool "Using ZERO device drivers" - default n - -config RT_USING_RANDOM - bool "Using RANDOM device drivers" - default n - -config RT_USING_PWM - bool "Using PWM device drivers" - default n - -config RT_USING_MTD_NOR - bool "Using MTD Nor Flash device drivers" - default n - -config RT_USING_MTD_NAND - bool "Using MTD Nand Flash device drivers" - default n - - if RT_USING_MTD_NAND - config RT_MTD_NAND_DEBUG - bool "Enable MTD Nand operations debug information" - default n - endif - -config RT_USING_PM - bool "Using Power Management device drivers" - default n - - if RT_USING_PM - config PM_TICKLESS_THRESHOLD_TIME - int "PM tickless threashold time" - default 2 - - config PM_USING_CUSTOM_CONFIG - bool "PM using custom pm config" - default n - - config PM_ENABLE_DEBUG - bool "PM Enable Debug" - default n - - config PM_ENABLE_SUSPEND_SLEEP_MODE - bool "PM Device suspend change sleep mode" - default n - - config PM_ENABLE_THRESHOLD_SLEEP_MODE - bool "PM using threshold time change sleep mode" - default n - - if PM_ENABLE_THRESHOLD_SLEEP_MODE - config PM_LIGHT_THRESHOLD_TIME - int "PM light mode threashold time" - default 5 - - config PM_DEEP_THRESHOLD_TIME - int "PM deep mode threashold time" - default 20 - - config PM_STANDBY_THRESHOLD_TIME - int "PM standby mode threashold time" - default 100 - endif - endif - -config RT_USING_RTC - bool "Using RTC device drivers" - default n - - if RT_USING_RTC - config RT_USING_ALARM - bool "Using RTC alarm" - default n - - config RT_USING_SOFT_RTC - bool "Using software simulation RTC device" - default n - endif - -config RT_USING_SDIO - bool "Using SD/MMC device drivers" - default n - - if RT_USING_SDIO - config RT_SDIO_STACK_SIZE - int "The stack size for sdio irq thread" - default 512 - - config RT_SDIO_THREAD_PRIORITY - int "The priority level value of sdio irq thread" - default 15 - - config RT_MMCSD_STACK_SIZE - int "The stack size for mmcsd thread" - default 1024 - - config RT_MMCSD_THREAD_PREORITY - int "The priority level value of mmcsd thread" - default 22 - - config RT_MMCSD_MAX_PARTITION - int "mmcsd max partition" - default 16 - config RT_SDIO_DEBUG - bool "Enable SDIO debug log output" - default n - endif - -config RT_USING_SPI - bool "Using SPI Bus/Device device drivers" - default n - - if RT_USING_SPI - config RT_USING_SPI_BITOPS - select RT_USING_PIN - bool "Use GPIO to simulate SPI" - default n - - if RT_USING_SPI_BITOPS - config RT_SPI_BITOPS_DEBUG - bool "Use simulate SPI debug message" - default n - endif - - config RT_USING_QSPI - bool "Enable QSPI mode" - default n - - config RT_USING_SPI_MSD - bool "Using SD/TF card driver with spi" - select RT_USING_DFS - default n - - config RT_USING_SFUD - bool "Using Serial Flash Universal Driver" - default n - help - An using JEDEC's SFDP standard serial (SPI) flash universal driver library - - if RT_USING_SFUD - config RT_SFUD_USING_SFDP - bool "Using auto probe flash JEDEC SFDP parameter" - default y - - config RT_SFUD_USING_FLASH_INFO_TABLE - bool "Using defined supported flash chip information table" - default y - - config RT_SFUD_USING_QSPI - bool "Using QSPI mode support" - select RT_USING_QSPI - default n - - config RT_SFUD_SPI_MAX_HZ - int "Default spi maximum speed(HZ)" - range 0 50000000 - default 50000000 - help - Read the JEDEC SFDP command must run at 50 MHz or less,and you also can use rt_spi_configure(); to config spi speed. - - config RT_DEBUG_SFUD - bool "Show more SFUD debug information" - default n - endif - - config RT_USING_ENC28J60 - bool "Using ENC28J60 SPI Ethernet network interface" - select RT_USING_LWIP - default n - - config RT_USING_SPI_WIFI - bool "Using RW009/007 SPI Wi-Fi wireless interface" - select RT_USING_LWIP - default n - endif - -config RT_USING_WDT - bool "Using Watch Dog device drivers" - default n - -config RT_USING_AUDIO - bool "Using Audio device drivers" - default n - - if RT_USING_AUDIO - config RT_AUDIO_REPLAY_MP_BLOCK_SIZE - int "Replay memory pool block size" - default 4096 - - config RT_AUDIO_REPLAY_MP_BLOCK_COUNT - int "Replay memory pool block count" - default 2 - - config RT_AUDIO_RECORD_PIPE_SIZE - int "Record pipe size" - default 2048 - endif - -config RT_USING_SENSOR - bool "Using Sensor device drivers" - select RT_USING_PIN - default n - -if RT_USING_SENSOR - config RT_USING_SENSOR_V2 - bool "Enable Sensor Framework v2" - default n - - config RT_USING_SENSOR_CMD - bool "Using Sensor cmd" - select PKG_USING_RT_VSNPRINTF_FULL if RT_USING_SENSOR_V2 - default y -endif - -config RT_USING_TOUCH - bool "Using Touch device drivers" - default n - if RT_USING_TOUCH - config RT_TOUCH_PIN_IRQ - bool "touch irq use pin irq" - default n - endif - -config RT_USING_LCD - bool "Using LCD graphic drivers" - default n - -menuconfig RT_USING_HWCRYPTO - bool "Using Hardware Crypto drivers" - default n - - if RT_USING_HWCRYPTO - config RT_HWCRYPTO_DEFAULT_NAME - string "Hardware crypto device name" - default "hwcryto" - - config RT_HWCRYPTO_IV_MAX_SIZE - int "IV max size" - default "16" - - config RT_HWCRYPTO_KEYBIT_MAX_SIZE - int "Key max bit length" - default 256 - - config RT_HWCRYPTO_USING_GCM - bool "Using Hardware GCM" - default n - - config RT_HWCRYPTO_USING_AES - bool "Using Hardware AES" - default n - - if RT_HWCRYPTO_USING_AES - config RT_HWCRYPTO_USING_AES_ECB - bool "Using Hardware AES ECB mode" - default y - - config RT_HWCRYPTO_USING_AES_CBC - bool "Using Hardware AES CBC mode" - default n - - config RT_HWCRYPTO_USING_AES_CFB - bool "Using Hardware AES CFB mode" - default n - - config RT_HWCRYPTO_USING_AES_CTR - bool "Using Hardware AES CTR mode" - default n - - config RT_HWCRYPTO_USING_AES_OFB - bool "Using Hardware AES OFB mode" - default n - endif - - config RT_HWCRYPTO_USING_DES - bool "Using Hardware DES" - default n - - if RT_HWCRYPTO_USING_DES - config RT_HWCRYPTO_USING_DES_ECB - bool "Using Hardware DES ECB mode" - default y - - config RT_HWCRYPTO_USING_DES_CBC - bool "Using Hardware DES CBC mode" - default n - endif - - config RT_HWCRYPTO_USING_3DES - bool "Using Hardware 3DES" - default n - - if RT_HWCRYPTO_USING_3DES - config RT_HWCRYPTO_USING_3DES_ECB - bool "Using Hardware 3DES ECB mode" - default y - - config RT_HWCRYPTO_USING_3DES_CBC - bool "Using Hardware 3DES CBC mode" - default n - endif - - config RT_HWCRYPTO_USING_RC4 - bool "Using Hardware RC4" - default n - - config RT_HWCRYPTO_USING_MD5 - bool "Using Hardware MD5" - default n - - config RT_HWCRYPTO_USING_SHA1 - bool "Using Hardware SHA1" - default n - - config RT_HWCRYPTO_USING_SHA2 - bool "Using Hardware SHA2" - default n - - if RT_HWCRYPTO_USING_SHA2 - config RT_HWCRYPTO_USING_SHA2_224 - bool "Using Hardware SHA2_224 mode" - default n - - config RT_HWCRYPTO_USING_SHA2_256 - bool "Using Hardware SHA2_256 mode" - default y - - config RT_HWCRYPTO_USING_SHA2_384 - bool "Using Hardware SHA2_384 mode" - default n - - config RT_HWCRYPTO_USING_SHA2_512 - bool "Using Hardware SHA2_512 mode" - default n - endif - - config RT_HWCRYPTO_USING_RNG - bool "Using Hardware RNG" - default n - - config RT_HWCRYPTO_USING_CRC - bool "Using Hardware CRC" - default n - - if RT_HWCRYPTO_USING_CRC - config RT_HWCRYPTO_USING_CRC_07 - bool "Using Hardware CRC-8 0x07 polynomial" - default n - - config RT_HWCRYPTO_USING_CRC_8005 - bool "Using Hardware CRC-16 0x8005 polynomial" - default n - - config RT_HWCRYPTO_USING_CRC_1021 - bool "Using Hardware CRC-16 0x1021 polynomial" - default n - - config RT_HWCRYPTO_USING_CRC_3D65 - bool "Using Hardware CRC-16 0x3D65 polynomial" - default n - - config RT_HWCRYPTO_USING_CRC_04C11DB7 - bool "Using Hardware CRC-32 0x04C11DB7 polynomial" - default n - endif - - config RT_HWCRYPTO_USING_BIGNUM - bool "Using Hardware bignum" - default n - - if RT_HWCRYPTO_USING_BIGNUM - config RT_HWCRYPTO_USING_BIGNUM_EXPTMOD - bool "Using Hardware bignum expt_mod operation" - default y - - config RT_HWCRYPTO_USING_BIGNUM_MULMOD - bool "Using Hardware bignum mul_mod operation" - default y - - config RT_HWCRYPTO_USING_BIGNUM_MUL - bool "Using Hardware bignum mul operation" - default n - - config RT_HWCRYPTO_USING_BIGNUM_ADD - bool "Using Hardware bignum add operation" - default n - - config RT_HWCRYPTO_USING_BIGNUM_SUB - bool "Using Hardware bignum sub operation" - default n - endif - endif - -config RT_USING_PULSE_ENCODER - bool "Using PULSE ENCODER device drivers" - default n - -config RT_USING_INPUT_CAPTURE - bool "Using INPUT CAPTURE device drivers" - default n - -if RT_USING_INPUT_CAPTURE - config RT_INPUT_CAPTURE_RB_SIZE - int "Set input capture ringbuffer size" - default 100 -endif - -config RT_USING_DEV_BUS - bool "Using Device Bus device drivers" - default y if RT_USING_SMART - default n - -menuconfig RT_USING_WIFI - bool "Using Wi-Fi framework" - default n - - if RT_USING_WIFI - config RT_WLAN_DEVICE_STA_NAME - string "The device name for station" - default "wlan0" - - config RT_WLAN_DEVICE_AP_NAME - string "The device name for ap" - default "wlan1" - - config RT_WLAN_SSID_MAX_LENGTH - int "SSID maximum length" - default 32 - - config RT_WLAN_PASSWORD_MAX_LENGTH - int "Password maximum length" - default 32 - - config RT_WLAN_DEV_EVENT_NUM - int "Driver events maxcount" - default 2 - - config RT_WLAN_MANAGE_ENABLE - bool "Connection management Enable" - default y - - if RT_WLAN_MANAGE_ENABLE - config RT_WLAN_SCAN_WAIT_MS - int "Set scan timeout time(ms)" - default 10000 - - config RT_WLAN_CONNECT_WAIT_MS - int "Set connect timeout time(ms)" - default 10000 - - config RT_WLAN_SCAN_SORT - bool "Automatic sorting of scan results" - default y - - config RT_WLAN_MSH_CMD_ENABLE - bool "MSH command Enable" - default y - - config RT_WLAN_JOIN_SCAN_BY_MGNT - bool "Enable wlan join scan" - default y - - config RT_WLAN_AUTO_CONNECT_ENABLE - bool "Auto connect Enable" - select RT_WLAN_CFG_ENABLE - select RT_WLAN_WORK_THREAD_ENABLE - default y - - if RT_WLAN_AUTO_CONNECT_ENABLE - config AUTO_CONNECTION_PERIOD_MS - int "Auto connect period(ms)" - default 2000 - endif - endif - - config RT_WLAN_CFG_ENABLE - bool "WiFi information automatically saved Enable" - default y - - if RT_WLAN_CFG_ENABLE - config RT_WLAN_CFG_INFO_MAX - int "Maximum number of WiFi information automatically saved" - default 3 - endif - - config RT_WLAN_PROT_ENABLE - bool "Transport protocol manage Enable" - default y - - if RT_WLAN_PROT_ENABLE - config RT_WLAN_PROT_NAME_LEN - int "Transport protocol name length" - default 8 - - config RT_WLAN_PROT_MAX - int "Transport protocol maxcount" - default 2 - - config RT_WLAN_DEFAULT_PROT - string "Default transport protocol" - default "lwip" - - config RT_WLAN_PROT_LWIP_ENABLE - bool "LWIP transport protocol Enable" - select RT_USING_LWIP - default y - - if RT_WLAN_PROT_LWIP_ENABLE - config RT_WLAN_PROT_LWIP_NAME - string "LWIP transport protocol name" - default "lwip" - - config RT_WLAN_PROT_LWIP_PBUF_FORCE - bool "Forced use of PBUF transmission" - default n - endif - endif - - config RT_WLAN_WORK_THREAD_ENABLE - bool "WLAN work queue thread Enable" - default y - - if RT_WLAN_WORK_THREAD_ENABLE - config RT_WLAN_WORKQUEUE_THREAD_NAME - string "WLAN work queue thread name" - default "wlan" - - config RT_WLAN_WORKQUEUE_THREAD_SIZE - int "WLAN work queue thread size" - default 2048 - - config RT_WLAN_WORKQUEUE_THREAD_PRIO - int "WLAN work queue thread priority" - default 15 - endif - - menuconfig RT_WLAN_DEBUG - bool "Enable WLAN Debugging Options" - default n - - if RT_WLAN_DEBUG - config RT_WLAN_CMD_DEBUG - bool "Enable Debugging of wlan_cmd.c" - default n - - config RT_WLAN_MGNT_DEBUG - bool "Enable Debugging of wlan_mgnt.c" - default n - - config RT_WLAN_DEV_DEBUG - bool "Enable Debugging of wlan_dev.c" - default n - - config RT_WLAN_PROT_DEBUG - bool "Enable Debugging of wlan_prot.c" - default n - - config RT_WLAN_CFG_DEBUG - bool "Enable Debugging of wlan_cfg.c" - default n - - config RT_WLAN_LWIP_DEBUG - bool "Enable Debugging of wlan_lwip.c" - default n - endif - endif - -menuconfig RT_USING_VIRTIO - bool "Using VirtIO device drivers" - default n - - if RT_USING_VIRTIO - choice - prompt "VirtIO Version" - default RT_USING_VIRTIO10 - - config RT_USING_VIRTIO10 - bool "VirtIO v1.0" - endchoice - - config RT_USING_VIRTIO_MMIO_ALIGN - bool "Using VirtIO MMIO alignment" - default y - - config RT_USING_VIRTIO_BLK - bool "Using VirtIO BLK" - default y - - config RT_USING_VIRTIO_NET - bool "Using VirtIO NET" - default y - - menuconfig RT_USING_VIRTIO_CONSOLE - bool "Using VirtIO Console" - default y - - if RT_USING_VIRTIO_CONSOLE - config RT_USING_VIRTIO_CONSOLE_PORT_MAX_NR - int "Max number of port in VirtIO Console" - default 4 - endif - - config RT_USING_VIRTIO_GPU - bool "Using VirtIO GPU" - default y - - config RT_USING_VIRTIO_INPUT - bool "Using VirtIO Input" - default y - endif - -source "$RTT_DIR/components/drivers/ofw/Kconfig" -source "$RTT_DIR/components/drivers/pic/Kconfig" -source "$RTT_DIR/components/drivers/pin/Kconfig" -source "$RTT_DIR/components/drivers/pinctrl/Kconfig" -source "$RTT_DIR/components/drivers/ktime/Kconfig" -source "$RTT_DIR/components/drivers/clk/Kconfig" -source "$RTT_DIR/components/drivers/hwtimer/Kconfig" -source "$RTT_DIR/components/drivers/usb/cherryusb/Kconfig" +rsource "core/Kconfig" +rsource "ipc/Kconfig" + +rsource "serial/Kconfig" +rsource "can/Kconfig" +rsource "cputime/Kconfig" +rsource "i2c/Kconfig" +rsource "phy/Kconfig" +rsource "misc/Kconfig" +rsource "mtd/Kconfig" +rsource "pm/Kconfig" +rsource "rtc/Kconfig" +rsource "sdio/Kconfig" +rsource "spi/Kconfig" +rsource "watchdog/Kconfig" +rsource "audio/Kconfig" +rsource "sensor/Kconfig" +rsource "touch/Kconfig" +rsource "graphic/Kconfig" +rsource "hwcrypto/Kconfig" +rsource "wlan/Kconfig" +rsource "virtio/Kconfig" +rsource "ofw/Kconfig" +rsource "pic/Kconfig" +rsource "pin/Kconfig" +rsource "pinctrl/Kconfig" +rsource "ktime/Kconfig" +rsource "clk/Kconfig" +rsource "hwtimer/Kconfig" +rsource "usb/Kconfig" +rsource "fdt/Kconfig" endmenu diff --git a/components/drivers/audio/Kconfig b/components/drivers/audio/Kconfig new file mode 100644 index 00000000000..e903eccc21c --- /dev/null +++ b/components/drivers/audio/Kconfig @@ -0,0 +1,17 @@ +config RT_USING_AUDIO + bool "Using Audio device drivers" + default n + + if RT_USING_AUDIO + config RT_AUDIO_REPLAY_MP_BLOCK_SIZE + int "Replay memory pool block size" + default 4096 + + config RT_AUDIO_REPLAY_MP_BLOCK_COUNT + int "Replay memory pool block count" + default 2 + + config RT_AUDIO_RECORD_PIPE_SIZE + int "Record pipe size" + default 2048 + endif diff --git a/components/drivers/can/Kconfig b/components/drivers/can/Kconfig new file mode 100644 index 00000000000..f4bc11dc86a --- /dev/null +++ b/components/drivers/can/Kconfig @@ -0,0 +1,12 @@ +config RT_USING_CAN + bool "Using CAN device drivers" + default n + +if RT_USING_CAN + config RT_CAN_USING_HDR + bool "Enable CAN hardware filter" + default n + config RT_CAN_USING_CANFD + bool "Enable CANFD support" + default n +endif diff --git a/components/drivers/core/Kconfig b/components/drivers/core/Kconfig new file mode 100644 index 00000000000..f2d107f83df --- /dev/null +++ b/components/drivers/core/Kconfig @@ -0,0 +1,11 @@ +config RT_USING_DM + bool "Enable device driver model with device tree" + default n + help + Enable device driver model with device tree (FDT). It will use more memory + to parse and support device tree feature. + +config RT_USING_DEV_BUS + bool "Using Device Bus device drivers" + default y if RT_USING_SMART + default n diff --git a/components/drivers/cputime/Kconfig b/components/drivers/cputime/Kconfig new file mode 100644 index 00000000000..97c2c462593 --- /dev/null +++ b/components/drivers/cputime/Kconfig @@ -0,0 +1,34 @@ +config RT_USING_CPUTIME + bool "Enable CPU time for high resolution clock counter" + default n + help + When enable this option, the BSP should provide a rt_clock_cputime_ops + for CPU time by: + const static struct rt_clock_cputime_ops _ops = {...}; + clock_cpu_setops(&_ops); + + Then user can use high resolution clock counter with: + + ts1 = clock_cpu_gettime(); + ts2 = clock_cpu_gettime(); + + /* and get the ms of delta tick with API: */ + ms_tick = clock_cpu_millisecond(t2 - t1); + us_tick = clock_cpu_microsecond(t2 - t1); + +if RT_USING_CPUTIME + config RT_USING_CPUTIME_CORTEXM + bool "Support Cortex-M CPU" + default y + depends on ARCH_ARM_CORTEX_M0 || ARCH_ARM_CORTEX_M3 || ARCH_ARM_CORTEX_M4 || ARCH_ARM_CORTEX_M7 + select PKG_USING_PERF_COUNTER + config RT_USING_CPUTIME_RISCV + bool "Use rdtime instructions for CPU time" + default y + depends on ARCH_RISCV64 + help + Some RISCV64 MCU Use rdtime instructions read CPU time. + config CPUTIME_TIMER_FREQ + int "CPUTIME timer freq" + default 0 +endif diff --git a/components/drivers/fdt/Kconfig b/components/drivers/fdt/Kconfig new file mode 100644 index 00000000000..e69de29bb2d diff --git a/components/drivers/graphic/Kconfig b/components/drivers/graphic/Kconfig new file mode 100644 index 00000000000..5ce0835743e --- /dev/null +++ b/components/drivers/graphic/Kconfig @@ -0,0 +1,3 @@ +config RT_USING_LCD + bool "Using LCD graphic drivers" + default n diff --git a/components/drivers/hwcrypto/Kconfig b/components/drivers/hwcrypto/Kconfig new file mode 100644 index 00000000000..e5748c998d7 --- /dev/null +++ b/components/drivers/hwcrypto/Kconfig @@ -0,0 +1,165 @@ +menuconfig RT_USING_HWCRYPTO + bool "Using Hardware Crypto drivers" + default n + + if RT_USING_HWCRYPTO + config RT_HWCRYPTO_DEFAULT_NAME + string "Hardware crypto device name" + default "hwcryto" + + config RT_HWCRYPTO_IV_MAX_SIZE + int "IV max size" + default "16" + + config RT_HWCRYPTO_KEYBIT_MAX_SIZE + int "Key max bit length" + default 256 + + config RT_HWCRYPTO_USING_GCM + bool "Using Hardware GCM" + default n + + config RT_HWCRYPTO_USING_AES + bool "Using Hardware AES" + default n + + if RT_HWCRYPTO_USING_AES + config RT_HWCRYPTO_USING_AES_ECB + bool "Using Hardware AES ECB mode" + default y + + config RT_HWCRYPTO_USING_AES_CBC + bool "Using Hardware AES CBC mode" + default n + + config RT_HWCRYPTO_USING_AES_CFB + bool "Using Hardware AES CFB mode" + default n + + config RT_HWCRYPTO_USING_AES_CTR + bool "Using Hardware AES CTR mode" + default n + + config RT_HWCRYPTO_USING_AES_OFB + bool "Using Hardware AES OFB mode" + default n + endif + + config RT_HWCRYPTO_USING_DES + bool "Using Hardware DES" + default n + + if RT_HWCRYPTO_USING_DES + config RT_HWCRYPTO_USING_DES_ECB + bool "Using Hardware DES ECB mode" + default y + + config RT_HWCRYPTO_USING_DES_CBC + bool "Using Hardware DES CBC mode" + default n + endif + + config RT_HWCRYPTO_USING_3DES + bool "Using Hardware 3DES" + default n + + if RT_HWCRYPTO_USING_3DES + config RT_HWCRYPTO_USING_3DES_ECB + bool "Using Hardware 3DES ECB mode" + default y + + config RT_HWCRYPTO_USING_3DES_CBC + bool "Using Hardware 3DES CBC mode" + default n + endif + + config RT_HWCRYPTO_USING_RC4 + bool "Using Hardware RC4" + default n + + config RT_HWCRYPTO_USING_MD5 + bool "Using Hardware MD5" + default n + + config RT_HWCRYPTO_USING_SHA1 + bool "Using Hardware SHA1" + default n + + config RT_HWCRYPTO_USING_SHA2 + bool "Using Hardware SHA2" + default n + + if RT_HWCRYPTO_USING_SHA2 + config RT_HWCRYPTO_USING_SHA2_224 + bool "Using Hardware SHA2_224 mode" + default n + + config RT_HWCRYPTO_USING_SHA2_256 + bool "Using Hardware SHA2_256 mode" + default y + + config RT_HWCRYPTO_USING_SHA2_384 + bool "Using Hardware SHA2_384 mode" + default n + + config RT_HWCRYPTO_USING_SHA2_512 + bool "Using Hardware SHA2_512 mode" + default n + endif + + config RT_HWCRYPTO_USING_RNG + bool "Using Hardware RNG" + default n + + config RT_HWCRYPTO_USING_CRC + bool "Using Hardware CRC" + default n + + if RT_HWCRYPTO_USING_CRC + config RT_HWCRYPTO_USING_CRC_07 + bool "Using Hardware CRC-8 0x07 polynomial" + default n + + config RT_HWCRYPTO_USING_CRC_8005 + bool "Using Hardware CRC-16 0x8005 polynomial" + default n + + config RT_HWCRYPTO_USING_CRC_1021 + bool "Using Hardware CRC-16 0x1021 polynomial" + default n + + config RT_HWCRYPTO_USING_CRC_3D65 + bool "Using Hardware CRC-16 0x3D65 polynomial" + default n + + config RT_HWCRYPTO_USING_CRC_04C11DB7 + bool "Using Hardware CRC-32 0x04C11DB7 polynomial" + default n + endif + + config RT_HWCRYPTO_USING_BIGNUM + bool "Using Hardware bignum" + default n + + if RT_HWCRYPTO_USING_BIGNUM + config RT_HWCRYPTO_USING_BIGNUM_EXPTMOD + bool "Using Hardware bignum expt_mod operation" + default y + + config RT_HWCRYPTO_USING_BIGNUM_MULMOD + bool "Using Hardware bignum mul_mod operation" + default y + + config RT_HWCRYPTO_USING_BIGNUM_MUL + bool "Using Hardware bignum mul operation" + default n + + config RT_HWCRYPTO_USING_BIGNUM_ADD + bool "Using Hardware bignum add operation" + default n + + config RT_HWCRYPTO_USING_BIGNUM_SUB + bool "Using Hardware bignum sub operation" + default n + endif + endif diff --git a/components/drivers/i2c/Kconfig b/components/drivers/i2c/Kconfig new file mode 100644 index 00000000000..40f04d1d2fd --- /dev/null +++ b/components/drivers/i2c/Kconfig @@ -0,0 +1,219 @@ +config RT_USING_I2C + bool "Using I2C device drivers" + default n + +if RT_USING_I2C + config RT_I2C_DEBUG + bool "Use I2C debug message" + default n + + config RT_USING_I2C_BITOPS + bool "Use GPIO to simulate I2C" + default y + + if RT_USING_I2C_BITOPS + config RT_I2C_BITOPS_DEBUG + bool "Use simulate I2C debug message" + default n + endif + + config RT_USING_SOFT_I2C + bool "Use GPIO to soft simulate I2C" + default n + select RT_USING_PIN + select RT_USING_I2C_BITOPS + if RT_USING_SOFT_I2C + config RT_USING_SOFT_I2C1 + bool "Enable I2C1 Bus (software simulation)" + default y + if RT_USING_SOFT_I2C1 + config RT_SOFT_I2C1_SCL_PIN + int "SCL pin number" + range 0 32767 + default 1 + config RT_SOFT_I2C1_SDA_PIN + int "SDA pin number" + range 0 32767 + default 2 + config RT_SOFT_I2C1_BUS_NAME + string "Bus name" + default "i2c1" + config RT_SOFT_I2C1_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C1_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C2 + bool "Enable I2C2 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C2 + config RT_SOFT_I2C2_SCL_PIN + int "SCL pin number" + range 0 32767 + default 3 + config RT_SOFT_I2C2_SDA_PIN + int "SDA pin number" + range 0 32767 + default 4 + config RT_SOFT_I2C2_BUS_NAME + string "Bus name" + default "i2c2" + config RT_SOFT_I2C2_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C2_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C3 + bool "Enable I2C3 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C3 + config RT_SOFT_I2C3_SCL_PIN + int "SCL pin number" + range 0 32767 + default 5 + config RT_SOFT_I2C3_SDA_PIN + int "SDA pin number" + range 0 32767 + default 6 + config RT_SOFT_I2C3_BUS_NAME + string "Bus name" + default "i2c3" + config RT_SOFT_I2C3_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C3_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C4 + bool "Enable I2C4 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C4 + config RT_SOFT_I2C4_SCL_PIN + int "SCL pin number" + range 0 32767 + default 7 + config RT_SOFT_I2C4_SDA_PIN + int "SDA pin number" + range 0 32767 + default 8 + config RT_SOFT_I2C4_BUS_NAME + string "Bus name" + default "i2c4" + config RT_SOFT_I2C4_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C4_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C5 + bool "Enable I2C5 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C5 + config RT_SOFT_I2C5_SCL_PIN + int "SCL pin number" + range 0 32767 + default 9 + config RT_SOFT_I2C5_SDA_PIN + int "SDA pin number" + range 0 32767 + default 10 + config RT_SOFT_I2C5_BUS_NAME + string "Bus name" + default "i2c5" + config RT_SOFT_I2C5_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C5_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C6 + bool "Enable I2C6 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C6 + config RT_SOFT_I2C6_SCL_PIN + int "SCL pin number" + range 0 32767 + default 11 + config RT_SOFT_I2C6_SDA_PIN + int "SDA pin number" + range 0 32767 + default 12 + config RT_SOFT_I2C6_BUS_NAME + string "Bus name" + default "i2c6" + config RT_SOFT_I2C6_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C6_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C7 + bool "Enable I2C7 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C7 + config RT_SOFT_I2C7_SCL_PIN + int "SCL pin number" + range 0 32767 + default 13 + config RT_SOFT_I2C7_SDA_PIN + int "SDA pin number" + range 0 32767 + default 14 + config RT_SOFT_I2C7_BUS_NAME + string "Bus name" + default "i2c7" + config RT_SOFT_I2C7_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C7_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + config RT_USING_SOFT_I2C8 + bool "Enable I2C8 Bus (software simulation)" + default n + if RT_USING_SOFT_I2C8 + config RT_SOFT_I2C8_SCL_PIN + int "SCL pin number" + range 0 32767 + default 15 + config RT_SOFT_I2C8_SDA_PIN + int "SDA pin number" + range 0 32767 + default 16 + config RT_SOFT_I2C8_BUS_NAME + string "Bus name" + default "i2c8" + config RT_SOFT_I2C8_TIMING_DELAY + int "Timing delay (us)" + range 0 32767 + default 10 + config RT_SOFT_I2C8_TIMING_TIMEOUT + int "Timing timeout (tick)" + range 0 32767 + default 10 + endif + endif +endif diff --git a/components/drivers/misc/Kconfig b/components/drivers/misc/Kconfig new file mode 100644 index 00000000000..fd092760991 --- /dev/null +++ b/components/drivers/misc/Kconfig @@ -0,0 +1,37 @@ +config RT_USING_ADC + bool "Using ADC device drivers" + default n + +config RT_USING_DAC + bool "Using DAC device drivers" + default n + +config RT_USING_NULL + bool "Using NULL device drivers" + default n + +config RT_USING_ZERO + bool "Using ZERO device drivers" + default n + +config RT_USING_RANDOM + bool "Using RANDOM device drivers" + default n + +config RT_USING_PWM + bool "Using PWM device drivers" + default n + +config RT_USING_PULSE_ENCODER + bool "Using PULSE ENCODER device drivers" + default n + +config RT_USING_INPUT_CAPTURE + bool "Using INPUT CAPTURE device drivers" + default n + +if RT_USING_INPUT_CAPTURE + config RT_INPUT_CAPTURE_RB_SIZE + int "Set input capture ringbuffer size" + default 100 +endif diff --git a/components/drivers/mtd/Kconfig b/components/drivers/mtd/Kconfig new file mode 100644 index 00000000000..384d002833e --- /dev/null +++ b/components/drivers/mtd/Kconfig @@ -0,0 +1,13 @@ +config RT_USING_MTD_NOR + bool "Using MTD Nor Flash device drivers" + default n + +config RT_USING_MTD_NAND + bool "Using MTD Nand Flash device drivers" + default n + + if RT_USING_MTD_NAND + config RT_MTD_NAND_DEBUG + bool "Enable MTD Nand operations debug information" + default n + endif diff --git a/components/drivers/phy/Kconfig b/components/drivers/phy/Kconfig new file mode 100644 index 00000000000..bb88a41526d --- /dev/null +++ b/components/drivers/phy/Kconfig @@ -0,0 +1,3 @@ +config RT_USING_PHY + bool "Using ethernet phy device drivers" + default n diff --git a/components/drivers/pm/Kconfig b/components/drivers/pm/Kconfig new file mode 100644 index 00000000000..0ed83510d49 --- /dev/null +++ b/components/drivers/pm/Kconfig @@ -0,0 +1,39 @@ +config RT_USING_PM + bool "Using Power Management device drivers" + default n + + if RT_USING_PM + config PM_TICKLESS_THRESHOLD_TIME + int "PM tickless threashold time" + default 2 + + config PM_USING_CUSTOM_CONFIG + bool "PM using custom pm config" + default n + + config PM_ENABLE_DEBUG + bool "PM Enable Debug" + default n + + config PM_ENABLE_SUSPEND_SLEEP_MODE + bool "PM Device suspend change sleep mode" + default n + + config PM_ENABLE_THRESHOLD_SLEEP_MODE + bool "PM using threshold time change sleep mode" + default n + + if PM_ENABLE_THRESHOLD_SLEEP_MODE + config PM_LIGHT_THRESHOLD_TIME + int "PM light mode threashold time" + default 5 + + config PM_DEEP_THRESHOLD_TIME + int "PM deep mode threashold time" + default 20 + + config PM_STANDBY_THRESHOLD_TIME + int "PM standby mode threashold time" + default 100 + endif + endif diff --git a/components/drivers/rtc/Kconfig b/components/drivers/rtc/Kconfig new file mode 100644 index 00000000000..e4310cb5b17 --- /dev/null +++ b/components/drivers/rtc/Kconfig @@ -0,0 +1,13 @@ +config RT_USING_RTC + bool "Using RTC device drivers" + default n + + if RT_USING_RTC + config RT_USING_ALARM + bool "Using RTC alarm" + default n + + config RT_USING_SOFT_RTC + bool "Using software simulation RTC device" + default n + endif diff --git a/components/drivers/sdio/Kconfig b/components/drivers/sdio/Kconfig new file mode 100644 index 00000000000..e5bff4549d8 --- /dev/null +++ b/components/drivers/sdio/Kconfig @@ -0,0 +1,28 @@ +config RT_USING_SDIO + bool "Using SD/MMC device drivers" + default n + + if RT_USING_SDIO + config RT_SDIO_STACK_SIZE + int "The stack size for sdio irq thread" + default 512 + + config RT_SDIO_THREAD_PRIORITY + int "The priority level value of sdio irq thread" + default 15 + + config RT_MMCSD_STACK_SIZE + int "The stack size for mmcsd thread" + default 1024 + + config RT_MMCSD_THREAD_PREORITY + int "The priority level value of mmcsd thread" + default 22 + + config RT_MMCSD_MAX_PARTITION + int "mmcsd max partition" + default 16 + config RT_SDIO_DEBUG + bool "Enable SDIO debug log output" + default n + endif diff --git a/components/drivers/sensor/Kconfig b/components/drivers/sensor/Kconfig new file mode 100644 index 00000000000..86f87111976 --- /dev/null +++ b/components/drivers/sensor/Kconfig @@ -0,0 +1,15 @@ +config RT_USING_SENSOR + bool "Using Sensor device drivers" + select RT_USING_PIN + default n + +if RT_USING_SENSOR + config RT_USING_SENSOR_V2 + bool "Enable Sensor Framework v2" + default n + + config RT_USING_SENSOR_CMD + bool "Using Sensor cmd" + select PKG_USING_RT_VSNPRINTF_FULL if RT_USING_SENSOR_V2 + default y +endif diff --git a/components/drivers/serial/Kconfig b/components/drivers/serial/Kconfig new file mode 100644 index 00000000000..00fcfb64610 --- /dev/null +++ b/components/drivers/serial/Kconfig @@ -0,0 +1,24 @@ +menuconfig RT_USING_SERIAL + bool "USING Serial device drivers" + select RT_USING_DEVICE_IPC + select RT_USING_DEVICE + default y + + if RT_USING_SERIAL + choice + prompt "Choice Serial version" + default RT_USING_SERIAL_V1 + config RT_USING_SERIAL_V1 + bool "RT_USING_SERIAL_V1" + config RT_USING_SERIAL_V2 + bool "RT_USING_SERIAL_V2" + endchoice + config RT_SERIAL_USING_DMA + bool "Enable serial DMA mode" + default y + + config RT_SERIAL_RB_BUFSZ + int "Set RX buffer size" + depends on !RT_USING_SERIAL_V2 + default 64 + endif diff --git a/components/drivers/spi/Kconfig b/components/drivers/spi/Kconfig new file mode 100644 index 00000000000..8925d8e9e8a --- /dev/null +++ b/components/drivers/spi/Kconfig @@ -0,0 +1,67 @@ +config RT_USING_SPI + bool "Using SPI Bus/Device device drivers" + default n + + if RT_USING_SPI + config RT_USING_SPI_BITOPS + select RT_USING_PIN + bool "Use GPIO to simulate SPI" + default n + + if RT_USING_SPI_BITOPS + config RT_SPI_BITOPS_DEBUG + bool "Use simulate SPI debug message" + default n + endif + + config RT_USING_QSPI + bool "Enable QSPI mode" + default n + + config RT_USING_SPI_MSD + bool "Using SD/TF card driver with spi" + select RT_USING_DFS + default n + + config RT_USING_SFUD + bool "Using Serial Flash Universal Driver" + default n + help + An using JEDEC's SFDP standard serial (SPI) flash universal driver library + + if RT_USING_SFUD + config RT_SFUD_USING_SFDP + bool "Using auto probe flash JEDEC SFDP parameter" + default y + + config RT_SFUD_USING_FLASH_INFO_TABLE + bool "Using defined supported flash chip information table" + default y + + config RT_SFUD_USING_QSPI + bool "Using QSPI mode support" + select RT_USING_QSPI + default n + + config RT_SFUD_SPI_MAX_HZ + int "Default spi maximum speed(HZ)" + range 0 50000000 + default 50000000 + help + Read the JEDEC SFDP command must run at 50 MHz or less,and you also can use rt_spi_configure(); to config spi speed. + + config RT_DEBUG_SFUD + bool "Show more SFUD debug information" + default n + endif + + config RT_USING_ENC28J60 + bool "Using ENC28J60 SPI Ethernet network interface" + select RT_USING_LWIP + default n + + config RT_USING_SPI_WIFI + bool "Using RW009/007 SPI Wi-Fi wireless interface" + select RT_USING_LWIP + default n + endif diff --git a/components/drivers/touch/Kconfig b/components/drivers/touch/Kconfig new file mode 100644 index 00000000000..6542ac4219f --- /dev/null +++ b/components/drivers/touch/Kconfig @@ -0,0 +1,8 @@ +config RT_USING_TOUCH + bool "Using Touch device drivers" + default n + if RT_USING_TOUCH + config RT_TOUCH_PIN_IRQ + bool "touch irq use pin irq" + default n + endif diff --git a/components/drivers/usb/Kconfig b/components/drivers/usb/Kconfig new file mode 100644 index 00000000000..cd8e4ebf869 --- /dev/null +++ b/components/drivers/usb/Kconfig @@ -0,0 +1 @@ +rsource "cherryusb/Kconfig" diff --git a/components/drivers/virtio/Kconfig b/components/drivers/virtio/Kconfig new file mode 100644 index 00000000000..c23d2da27fc --- /dev/null +++ b/components/drivers/virtio/Kconfig @@ -0,0 +1,43 @@ +menuconfig RT_USING_VIRTIO + bool "Using VirtIO device drivers" + default n + + if RT_USING_VIRTIO + choice + prompt "VirtIO Version" + default RT_USING_VIRTIO10 + + config RT_USING_VIRTIO10 + bool "VirtIO v1.0" + endchoice + + config RT_USING_VIRTIO_MMIO_ALIGN + bool "Using VirtIO MMIO alignment" + default y + + config RT_USING_VIRTIO_BLK + bool "Using VirtIO BLK" + default y + + config RT_USING_VIRTIO_NET + bool "Using VirtIO NET" + default y + + menuconfig RT_USING_VIRTIO_CONSOLE + bool "Using VirtIO Console" + default y + + if RT_USING_VIRTIO_CONSOLE + config RT_USING_VIRTIO_CONSOLE_PORT_MAX_NR + int "Max number of port in VirtIO Console" + default 4 + endif + + config RT_USING_VIRTIO_GPU + bool "Using VirtIO GPU" + default y + + config RT_USING_VIRTIO_INPUT + bool "Using VirtIO Input" + default y + endif diff --git a/components/drivers/watchdog/Kconfig b/components/drivers/watchdog/Kconfig new file mode 100644 index 00000000000..b70d465dfd3 --- /dev/null +++ b/components/drivers/watchdog/Kconfig @@ -0,0 +1,3 @@ +config RT_USING_WDT + bool "Using Watch Dog device drivers" + default n diff --git a/components/drivers/wlan/Kconfig b/components/drivers/wlan/Kconfig new file mode 100644 index 00000000000..59ad948bcac --- /dev/null +++ b/components/drivers/wlan/Kconfig @@ -0,0 +1,154 @@ +menuconfig RT_USING_WIFI + bool "Using Wi-Fi framework" + default n + + if RT_USING_WIFI + config RT_WLAN_DEVICE_STA_NAME + string "The device name for station" + default "wlan0" + + config RT_WLAN_DEVICE_AP_NAME + string "The device name for ap" + default "wlan1" + + config RT_WLAN_SSID_MAX_LENGTH + int "SSID maximum length" + default 32 + + config RT_WLAN_PASSWORD_MAX_LENGTH + int "Password maximum length" + default 32 + + config RT_WLAN_DEV_EVENT_NUM + int "Driver events maxcount" + default 2 + + config RT_WLAN_MANAGE_ENABLE + bool "Connection management Enable" + default y + + if RT_WLAN_MANAGE_ENABLE + config RT_WLAN_SCAN_WAIT_MS + int "Set scan timeout time(ms)" + default 10000 + + config RT_WLAN_CONNECT_WAIT_MS + int "Set connect timeout time(ms)" + default 10000 + + config RT_WLAN_SCAN_SORT + bool "Automatic sorting of scan results" + default y + + config RT_WLAN_MSH_CMD_ENABLE + bool "MSH command Enable" + default y + + config RT_WLAN_JOIN_SCAN_BY_MGNT + bool "Enable wlan join scan" + default y + + config RT_WLAN_AUTO_CONNECT_ENABLE + bool "Auto connect Enable" + select RT_WLAN_CFG_ENABLE + select RT_WLAN_WORK_THREAD_ENABLE + default y + + if RT_WLAN_AUTO_CONNECT_ENABLE + config AUTO_CONNECTION_PERIOD_MS + int "Auto connect period(ms)" + default 2000 + endif + endif + + config RT_WLAN_CFG_ENABLE + bool "WiFi information automatically saved Enable" + default y + + if RT_WLAN_CFG_ENABLE + config RT_WLAN_CFG_INFO_MAX + int "Maximum number of WiFi information automatically saved" + default 3 + endif + + config RT_WLAN_PROT_ENABLE + bool "Transport protocol manage Enable" + default y + + if RT_WLAN_PROT_ENABLE + config RT_WLAN_PROT_NAME_LEN + int "Transport protocol name length" + default 8 + + config RT_WLAN_PROT_MAX + int "Transport protocol maxcount" + default 2 + + config RT_WLAN_DEFAULT_PROT + string "Default transport protocol" + default "lwip" + + config RT_WLAN_PROT_LWIP_ENABLE + bool "LWIP transport protocol Enable" + select RT_USING_LWIP + default y + + if RT_WLAN_PROT_LWIP_ENABLE + config RT_WLAN_PROT_LWIP_NAME + string "LWIP transport protocol name" + default "lwip" + + config RT_WLAN_PROT_LWIP_PBUF_FORCE + bool "Forced use of PBUF transmission" + default n + endif + endif + + config RT_WLAN_WORK_THREAD_ENABLE + bool "WLAN work queue thread Enable" + default y + + if RT_WLAN_WORK_THREAD_ENABLE + config RT_WLAN_WORKQUEUE_THREAD_NAME + string "WLAN work queue thread name" + default "wlan" + + config RT_WLAN_WORKQUEUE_THREAD_SIZE + int "WLAN work queue thread size" + default 2048 + + config RT_WLAN_WORKQUEUE_THREAD_PRIO + int "WLAN work queue thread priority" + default 15 + endif + + menuconfig RT_WLAN_DEBUG + bool "Enable WLAN Debugging Options" + default n + + if RT_WLAN_DEBUG + config RT_WLAN_CMD_DEBUG + bool "Enable Debugging of wlan_cmd.c" + default n + + config RT_WLAN_MGNT_DEBUG + bool "Enable Debugging of wlan_mgnt.c" + default n + + config RT_WLAN_DEV_DEBUG + bool "Enable Debugging of wlan_dev.c" + default n + + config RT_WLAN_PROT_DEBUG + bool "Enable Debugging of wlan_prot.c" + default n + + config RT_WLAN_CFG_DEBUG + bool "Enable Debugging of wlan_cfg.c" + default n + + config RT_WLAN_LWIP_DEBUG + bool "Enable Debugging of wlan_lwip.c" + default n + endif + endif