main.yml

---
# ---------------------------------------------------------------------
# Proxy variables (optional) for download packages using a proxy server
proxy_env: {}  # yamllint disable rule:braces
#  http_proxy: http://10.128.64.9:3128
#  https_proxy: http://10.128.64.9:3128
# ---------------------------------------------------------------------

# Cluster variables
cluster_vip: ""  # ip address for client access to databases in the cluster (optional)
vip_interface: "{{ ansible_default_ipv4.interface }}"  # interface name (ex. "ens32")

patroni_cluster_name: "postgres-cluster"  # the cluster name (must be unique for each cluster)
patroni_install_version: "latest"  # or specific version (example 1.5.6)

patroni_superuser_username: "postgres"
patroni_superuser_password: "postgres-pass"  # please change password
patroni_replication_username: "replicator"
patroni_replication_password: "replicator-pass"  # please change password

synchronous_mode: false  # or 'true' for enable synchronous database replication
synchronous_mode_strict: false  # if 'true' then block all client writes to the master, when a synchronous replica is not available
synchronous_node_count: 1  # number of synchronous standby databases

# Load Balancing
with_haproxy_load_balancing: false  # or 'true' if you want to install and configure the load-balancing
haproxy_listen_port:
  master: 5000
  replicas: 5001
  replicas_sync: 5002
  replicas_async: 5003
  stats: 7000
haproxy_maxconn:
  global: 100000
  master: 10000
  replica: 10000
haproxy_timeout:
  client: "60m"
  server: "60m"

# vip-manager (if cluster_vip is specified and with_haproxy_load_balancing: false)
vip_manager_version: "2.1.0"  # version to install
vip_manager_conf: "/etc/patroni/vip-manager.yml"
vip_manager_interval: "1000"  # time (in milliseconds) after which vip-manager wakes up and checks if it needs to register or release ip addresses.
vip_manager_iface: "{{ vip_interface }}"  # interface to which the virtual ip will be added
vip_manager_ip: "{{ cluster_vip }}"  # the virtual ip address to manage
vip_manager_mask: "24"  # netmask for the virtual ip


# DCS (Distributed Consensus Store)
dcs_exists: false  # or 'true' if you don't want to deploy a new etcd cluster
dcs_type: "etcd"  # or 'consul'

# if dcs_type: "etcd" and dcs_exists: false
etcd_version: "3.5.9"  # version for deploy etcd cluster
etcd_data_dir: "/var/lib/etcd"
etcd_cluster_name: "etcd-{{ patroni_cluster_name }}"  # ETCD_INITIAL_CLUSTER_TOKEN

# if dcs_type: "etcd" and dcs_exists: true
patroni_etcd_hosts: []  # list of servers of an existing etcd cluster
#  - { host: "10.128.64.140", port: "2379" }
#  - { host: "10.128.64.142", port: "2379" }
#  - { host: "10.128.64.143", port: "2379" }

# more options you can specify in the roles/patroni/templates/patroni.yml.j2
# https://patroni.readthedocs.io/en/latest/SETTINGS.html#etcd
# https://patroni.readthedocs.io/en/latest/SETTINGS.html#consul

# if dcs_type: "consul"
consul_version: "1.14.7"
consul_config_path: "/etc/consul"
consul_configd_path: "{{ consul_config_path }}/conf.d"
consul_data_path: "/var/lib/consul"
consul_domain: "consul"  # Consul domain name
consul_datacenter: "dc1"  # Datacenter label (can be specified for each host in the inventory)
consul_disable_update_check: true  # Disables automatic checking for security bulletins and new version releases
consul_enable_script_checks: true  # This controls whether health checks that execute scripts are enabled on this agent
consul_enable_local_script_checks: true  # Enable them when they are defined in the local configuration files
consul_ui: false  # Enable the consul UI?
consul_syslog_enable: true  # Enable logging to syslog
consul_iface: "{{ ansible_default_ipv4.interface }}"  # specify the interface name with a Private IP (ex. "enp7s0")
# TLS
# You can enable TLS encryption by dropping a CA certificate, server certificate, and server key in roles/consul/files/
consul_tls_enable: false
consul_tls_ca_crt: "ca.crt"
consul_tls_server_crt: "server.crt"
consul_tls_server_key: "server.key"
# DNS
consul_recursors: []  # List of upstream DNS servers
consul_dnsmasq_enable: true  # Enable DNS forwarding with Dnsmasq
consul_dnsmasq_cache: 0  # dnsmasq cache-size (0 - disable caching)
consul_dnsmasq_servers:  # Upstream DNS servers used by dnsmasq
  - "8.8.8.8"
  - "9.9.9.9"
consul_join: []  # List of LAN servers of an existing consul cluster, to join.
# - "10.128.64.140"
# - "10.128.64.142"
# - "10.128.64.143"

# https://developer.hashicorp.com/consul/docs/discovery/services
consul_services:
  - name: "{{ patroni_cluster_name }}"
    id: "{{ patroni_cluster_name }}-master"
    tags: ['master', 'primary']
    port: "{{ pgbouncer_listen_port }}"  # or "{{ postgresql_port }}" if pgbouncer_install: false
    checks:
      - { http: "http://{{ inventory_hostname }}:{{ patroni_restapi_port }}/primary", interval: "2s" }
      - { args: ["systemctl", "status", "pgbouncer"], interval: "5s" }  # comment out this check if pgbouncer_install: false
  - name: "{{ patroni_cluster_name }}"
    id: "{{ patroni_cluster_name }}-replica"
    tags: ['replica']
    port: "{{ pgbouncer_listen_port }}"
    checks:
      - { http: "http://{{ inventory_hostname }}:{{ patroni_restapi_port }}/replica", interval: "2s" }
      - { args: ["systemctl", "status", "pgbouncer"], interval: "5s" }
#  - name: "{{ patroni_cluster_name }}"
#    id: "{{ patroni_cluster_name }}-sync-replica"
#    tags: ['sync-replica']
#    port: "{{ pgbouncer_listen_port }}"
#    checks:
#      - { http: "http://{{ inventory_hostname }}:{{ patroni_restapi_port }}/sync", interval: "2s" }
#      - { args: ["systemctl", "status", "pgbouncer"], interval: "5s" }
#  - name: "{{ patroni_cluster_name }}"
#    id: "{{ patroni_cluster_name }}-async-replica"
#    tags: ['async-replica']
#    port: "{{ pgbouncer_listen_port }}"
#    checks:
#      - { http: "http://{{ inventory_hostname }}:{{ patroni_restapi_port }}/async", interval: "2s" }
#      - { args: ["systemctl", "status", "pgbouncer"], interval: "5s" }


# PostgreSQL variables
postgresql_version: "15"
# postgresql_data_dir: see vars/Debian.yml or vars/RedHat.yml
postgresql_port: "5432"
postgresql_encoding: "UTF8"  # for bootstrap only (initdb)
postgresql_locale: "en_US.UTF-8"  # for bootstrap only (initdb)
postgresql_data_checksums: true  # for bootstrap only (initdb)
postgresql_password_encryption_algorithm: "scram-sha-256"  # or "md5" if your clients do not work with passwords encrypted with SCRAM-SHA-256

# (optional) list of users to be created (if not already exists)
postgresql_users:
  - { name: "{{ pgbouncer_auth_username }}", password: "{{ pgbouncer_auth_password }}", flags: "LOGIN" }
#  - { name: "mydb-user", password: "mydb-user-pass", flags: "SUPERUSER" }
#  - { name: "", password: "", flags: "NOSUPERUSER" }
#  - { name: "", password: "", flags: "NOSUPERUSER" }
#  - { name: "", password: "", flags: "NOLOGIN" }

# (optional) list of databases to be created (if not already exists)
postgresql_databases: []
#  - { db: "mydatabase", encoding: "UTF8", lc_collate: "ru_RU.UTF-8", lc_ctype: "ru_RU.UTF-8", owner: "mydb-user" }
#  - { db: "mydatabase2", encoding: "UTF8", lc_collate: "ru_RU.UTF-8", lc_ctype: "ru_RU.UTF-8", owner: "mydb-user", conn_limit: "50" }
#  - { db: "", encoding: "UTF8", lc_collate: "en_US.UTF-8", lc_ctype: "en_US.UTF-8", owner: "" }
#  - { db: "", encoding: "UTF8", lc_collate: "en_US.UTF-8", lc_ctype: "en_US.UTF-8", owner: "" }

# (optional) list of schemas to be created (if not already exists)
postgresql_schemas: []
#  - { schema: "myschema", db: "mydatabase", owner: "mydb-user" }

# (optional) list of database extensions to be created (if not already exists)
postgresql_extensions: []
#  - { ext: "pg_stat_statements", db: "postgres" }
#  - { ext: "pg_stat_statements", db: "mydatabase" }
#  - { ext: "pg_stat_statements", db: "mydatabase", schema: "myschema" }
#  - { ext: "pg_stat_statements", db: "" }
#  - { ext: "pg_stat_statements", db: "" }
#  - { ext: "pg_repack", db: "" }  # postgresql-<version>-repack package is required
#  - { ext: "pg_stat_kcache", db: "" }  # postgresql-<version>-pg-stat-kcache package is required
#  - { ext: "", db: "" }
#  - { ext: "", db: "" }


# postgresql parameters to bootstrap dcs (are parameters for example)
postgresql_parameters:
  - { option: "max_connections", value: "500" }
  - { option: "superuser_reserved_connections", value: "5" }
  - { option: "password_encryption", value: "{{ postgresql_password_encryption_algorithm }}" }
  - { option: "max_locks_per_transaction", value: "512" }
  - { option: "max_prepared_transactions", value: "0" }
  - { option: "huge_pages", value: "try" }  # or "on" if you set "vm_nr_hugepages" in kernel parameters
  - { option: "shared_buffers", value: "{{ (ansible_memtotal_mb * 0.25) | int }}MB" }  # by default, 25% of RAM
  - { option: "effective_cache_size", value: "{{ (ansible_memtotal_mb * 0.75) | int }}MB" }  # by default, 75% of RAM
  - { option: "work_mem", value: "128MB" }  # please change this value
  - { option: "maintenance_work_mem", value: "256MB" }  # please change this value
  - { option: "checkpoint_timeout", value: "15min" }
  - { option: "checkpoint_completion_target", value: "0.9" }
  - { option: "min_wal_size", value: "2GB" }
  - { option: "max_wal_size", value: "8GB" }  # or 16GB/32GB
  - { option: "wal_buffers", value: "32MB" }
  - { option: "default_statistics_target", value: "1000" }
  - { option: "seq_page_cost", value: "1" }
  - { option: "random_page_cost", value: "4" }  # "1.1" for SSD storage. Also, if your databases fits in shared_buffers
  - { option: "effective_io_concurrency", value: "2" }  # "200" for SSD storage
  - { option: "synchronous_commit", value: "on" }  # or 'off' if you can you lose single transactions in case of a crash
  - { option: "autovacuum", value: "on" }  # never turn off the autovacuum!
  - { option: "autovacuum_max_workers", value: "5" }
  - { option: "autovacuum_vacuum_scale_factor", value: "0.01" }  # or 0.005/0.001
  - { option: "autovacuum_analyze_scale_factor", value: "0.01" }
  - { option: "autovacuum_vacuum_cost_limit", value: "500" }  # or 1000/5000
  - { option: "autovacuum_vacuum_cost_delay", value: "2" }
  - { option: "autovacuum_naptime", value: "1s" }
  - { option: "max_files_per_process", value: "4096" }
  - { option: "archive_mode", value: "on" }
  - { option: "archive_timeout", value: "1800s" }
  - { option: "archive_command", value: "cd ." }  # not doing anything yet with WAL-s
#  - { option: "archive_command", value: "{{ wal_g_archive_command }}" }  # archive WAL-s using WAL-G
#  - { option: "archive_command", value: "{{ pgbackrest_archive_command }}" }  # archive WAL-s using pgbackrest
  - { option: "wal_level", value: "replica" }
  - { option: "wal_keep_size", value: "2GB" }
  - { option: "max_wal_senders", value: "10" }
  - { option: "max_replication_slots", value: "10" }
  - { option: "hot_standby", value: "on" }
  - { option: "wal_log_hints", value: "on" }
  - { option: "wal_compression", value: "on" }
  - { option: "shared_preload_libraries", value: "pg_stat_statements,auto_explain" }
  - { option: "pg_stat_statements.max", value: "10000" }
  - { option: "pg_stat_statements.track", value: "all" }
  - { option: "pg_stat_statements.track_utility", value: "false" }
  - { option: "pg_stat_statements.save", value: "true" }
  - { option: "auto_explain.log_min_duration", value: "10s" }  # enable auto_explain for 10-second logging threshold. Decrease this value if necessary
  - { option: "auto_explain.log_analyze", value: "true" }
  - { option: "auto_explain.log_buffers", value: "true" }
  - { option: "auto_explain.log_timing", value: "false" }
  - { option: "auto_explain.log_triggers", value: "true" }
  - { option: "auto_explain.log_verbose", value: "true" }
  - { option: "auto_explain.log_nested_statements", value: "true" }
  - { option: "auto_explain.sample_rate", value: "0.01" }  # enable auto_explain for 1% of queries logging threshold
  - { option: "track_io_timing", value: "on" }
  - { option: "log_lock_waits", value: "on" }
  - { option: "log_temp_files", value: "0" }
  - { option: "track_activities", value: "on" }
  - { option: "track_activity_query_size", value: "4096" }
  - { option: "track_counts", value: "on" }
  - { option: "track_functions", value: "all" }
  - { option: "log_checkpoints", value: "on" }
  - { option: "logging_collector", value: "on" }
  - { option: "log_truncate_on_rotation", value: "on" }
  - { option: "log_rotation_age", value: "1d" }
  - { option: "log_rotation_size", value: "0" }
  - { option: "log_line_prefix", value: "'%t [%p-%l] %r %q%u@%d '" }
  - { option: "log_filename", value: "postgresql-%a.log" }
  - { option: "log_directory", value: "{{ postgresql_log_dir }}" }
  - { option: "hot_standby_feedback", value: "on" }  # allows feedback from a hot standby to the primary that will avoid query conflicts
  - { option: "max_standby_streaming_delay", value: "30s" }
  - { option: "wal_receiver_status_interval", value: "10s" }
  - { option: "idle_in_transaction_session_timeout", value: "10min" }  # reduce this timeout if possible
  - { option: "jit", value: "off" }
  - { option: "max_worker_processes", value: "24" }
  - { option: "max_parallel_workers", value: "8" }
  - { option: "max_parallel_workers_per_gather", value: "2" }
  - { option: "max_parallel_maintenance_workers", value: "2" }
  - { option: "tcp_keepalives_count", value: "10" }
  - { option: "tcp_keepalives_idle", value: "300" }
  - { option: "tcp_keepalives_interval", value: "30" }
#  - { option: "old_snapshot_threshold", value: "60min" }
#  - { option: "", value: "" }
#  - { option: "", value: "" }

# Set this variable to 'true' if you want the cluster to be automatically restarted
# after changing the 'postgresql_parameters' variable that requires a restart in the 'config_pgcluster.yml' playbook.
# By default, the cluster will not be automatically restarted.
pending_restart: false

# specify additional hosts that will be added to the pg_hba.conf
postgresql_pg_hba:
  - { type: "local", database: "all", user: "{{ patroni_superuser_username }}", address: "", method: "trust" }
  - { type: "local", database: "replication", user: "{{ patroni_superuser_username }}", address: "", method: "trust" }
  - { type: "local", database: "all", user: "all", address: "", method: "peer" }
  - { type: "host", database: "all", user: "{{ pgbouncer_auth_username }}", address: "127.0.0.1/32", method: "trust" } # required for pgbouncer auth_user
  - { type: "host", database: "all", user: "all", address: "127.0.0.1/32", method: "{{ postgresql_password_encryption_algorithm }}" }
  - { type: "host", database: "all", user: "all", address: "::1/128", method: "{{ postgresql_password_encryption_algorithm }}" }
#  - { type: "host", database: "mydatabase", user: "mydb-user", address: "192.168.0.0/24", method: "{{ postgresql_password_encryption_algorithm }}" }
#  - { type: "host", database: "all", user: "all", address: "192.168.0.0/24", method: "ident", options: "map=main" }  # use pg_ident

# list of lines that Patroni will use to generate pg_ident.conf
postgresql_pg_ident: []
#  - { mapname: "main", system_username: "postgres", pg_username: "backup" }
#  - { mapname: "", system_username: "", pg_username: "" }

# the password file (~/.pgpass)
postgresql_pgpass:
  - "localhost:{{ postgresql_port }}:*:{{ patroni_superuser_username }}:{{ patroni_superuser_password }}"
  - "{{ inventory_hostname }}:{{ postgresql_port }}:*:{{ patroni_superuser_username }}:{{ patroni_superuser_password }}"
#  - hostname:port:database:username:password


# PgBouncer parameters
pgbouncer_install: true  # or 'false' if you do not want to install and configure the pgbouncer service
pgbouncer_conf_dir: "/etc/pgbouncer"
pgbouncer_log_dir: "/var/log/pgbouncer"
pgbouncer_listen_addr: "0.0.0.0"
pgbouncer_listen_port: 6432
pgbouncer_max_client_conn: 10000
pgbouncer_max_db_connections: 1000
pgbouncer_default_pool_size: 20
pgbouncer_query_wait_timeout: 120
pgbouncer_default_pool_mode: "session"
pgbouncer_admin_users: "postgres"  # comma-separated list of users, who are allowed to change settings
pgbouncer_stats_users: "postgres"  # comma-separated list of users who are just allowed to use SHOW command
pgbouncer_ignore_startup_parameters: "extra_float_digits,geqo,search_path"
pgbouncer_auth_type: "{{ postgresql_password_encryption_algorithm }}"
pgbouncer_auth_user: true # or 'false' if you want to manage the list of users for authentication in the database via userlist.txt
pgbouncer_auth_username: pgbouncer # user who can query the database via the user_search function
pgbouncer_auth_password: "pgbouncer-pass" # please change password

pgbouncer_pools:
  - { name: "postgres", dbname: "postgres", pool_parameters: "" }
#  - { name: "mydatabase", dbname: "mydatabase", pool_parameters: "pool_size=20 pool_mode=transaction" }
#  - { name: "", dbname: "", pool_parameters: "" }
#  - { name: "", dbname: "", pool_parameters: "" }


# Extended variables (optional)
patroni_restapi_port: 8008
patroni_ttl: 30
patroni_loop_wait: 10
patroni_retry_timeout: 10
patroni_maximum_lag_on_failover: 1048576
patroni_master_start_timeout: 300

# https://patroni.readthedocs.io/en/latest/SETTINGS.html?highlight=callbacks#dynamic-configuration-settings
patroni_callbacks: []
#  - {action: "on_role_change", script: ""}
#  - {action: "on_stop", script: ""}
#  - {action: "on_restart", script: ""}
#  - {action: "on_reload", script: ""}
#  - {action: "on_role_change", script: ""}

# https://patroni.readthedocs.io/en/latest/replica_bootstrap.html#standby-cluster
# Requirements:
# 1. the cluster name for Standby Cluster must be unique ('patroni_cluster_name' variable)
# 2. the IP addresses (or network) of the Standby Cluster servers must be added to the pg_hba.conf of the Main Cluster ('postgresql_pg_hba' variable).
patroni_standby_cluster:
  host: ""  # an address of remote master
  port: "5432"  # a port of remote master
#  primary_slot_name: ""  # which slot on the remote master to use for replication (optional)
#  restore_command: ""  # command to restore WAL records from the remote master to standby leader (optional)
#  recovery_min_apply_delay: ""  # how long to wait before actually apply WAL records on a standby leader (optional)

patroni_log_destination: stderr  # or 'logfile'
# if patroni_log_destination: logfile
patroni_log_dir: /var/log/patroni
patroni_log_level: info
patroni_log_traceback_level: error
patroni_log_format: "%(asctime)s %(levelname)s: %(message)s"
patroni_log_dateformat: ""
patroni_log_max_queue_size: 1000
patroni_log_file_num: 4
patroni_log_file_size: 25000000  # bytes
patroni_log_loggers_patroni_postmaster: warning
patroni_log_loggers_urllib3: warning  # or 'debug'

patroni_watchdog_mode: automatic  # or 'off', 'required'
patroni_watchdog_device: /dev/watchdog

patroni_postgresql_use_pg_rewind: true  # or 'false'
# try to use pg_rewind on the former leader when it joins cluster as a replica.

patroni_remove_data_directory_on_rewind_failure: false  # or 'true' (if use_pg_rewind: 'true')
# avoid removing the data directory on an unsuccessful rewind
# if 'true', Patroni will remove the PostgreSQL data directory and recreate the replica.

patroni_remove_data_directory_on_diverged_timelines: false  # or 'true'
# if 'true', Patroni will remove the PostgreSQL data directory and recreate the replica
# if it notices that timelines are diverging and the former master can not start streaming from the new master.

# https://patroni.readthedocs.io/en/latest/replica_bootstrap.html#bootstrap
patroni_cluster_bootstrap_method: "initdb"  # or "wal-g", "pgbackrest", "pg_probackup"

# https://patroni.readthedocs.io/en/latest/replica_bootstrap.html#building-replicas
patroni_create_replica_methods:
#  - pgbackrest
#  - wal_g
#  - pg_probackup
  - basebackup

pgbackrest:
  - { option: "command", value: "/usr/bin/pgbackrest --stanza={{ pgbackrest_stanza }} --delta restore" }
  - { option: "keep_data", value: "True" }
  - { option: "no_params", value: "True" }
wal_g:
  - { option: "command", value: "wal-g backup-fetch {{ postgresql_data_dir }} LATEST" }
  - { option: "no_params", value: "True" }
basebackup:
  - { option: "max-rate", value: "100M" }
  - { option: "checkpoint", value: "fast" }
pg_probackup:
  - { option: "command", value: "pg_probackup-{{ pg_probackup_version }} restore -B {{ pg_probackup_dir }} --instance {{ pg_probackup_instance }} -j {{ pg_probackup_threads }} {{ pg_probackup_add_keys }}" }
  - { option: "no_params", value: "true" }

# "restore_command" written to recovery.conf when configuring follower (create replica)
postgresql_restore_command: ""
# postgresql_restore_command: "wal-g wal-fetch %f %p"  # restore WAL-s using WAL-G
# postgresql_restore_command: "pgbackrest --stanza={{ pgbackrest_stanza }} archive-get %f %p"  # restore WAL-s using pgbackrest
# postgresql_restore_command: "pg_probackup-{{ pg_probackup_version }} archive-get -B {{ pg_probackup_dir }} --instance {{ pg_probackup_instance }} --wal-file-path=%p --wal-file-name=%f"  # restore WAL-s using pg_probackup

# pg_probackup
pg_probackup_install: false  # or 'true'
pg_probackup_install_from_postgrespro_repo: true  # or 'false'
pg_probackup_version: "{{ postgresql_version }}"
pg_probackup_instance: "pg_probackup_instance_name"
pg_probackup_dir: "/mnt/backup_dir"
pg_probackup_threads: "4"
pg_probackup_add_keys: "--recovery-target=latest --skip-external-dirs --no-validate"
pg_probackup_patroni_cluster_bootstrap_command: "pg_probackup-{{ pg_probackup_version }} restore -B {{ pg_probackup_dir }} --instance {{ pg_probackup_instance }} -j {{ pg_probackup_threads }} {{ pg_probackup_add_keys }}"

# WAL-G
wal_g_install: false  # or 'true'
wal_g_version: "2.0.1"
wal_g_json:  # config https://github.com/wal-g/wal-g#configuration
  - { option: "AWS_ACCESS_KEY_ID", value: "{{ AWS_ACCESS_KEY_ID | default('') }}" }  # define values or pass via --extra-vars
  - { option: "AWS_SECRET_ACCESS_KEY", value: "{{ AWS_SECRET_ACCESS_KEY | default('') }}" }  # define values or pass via --extra-vars
  - { option: "WALG_S3_PREFIX", value: "{{ WALG_S3_PREFIX | default('') }}" } # define values or pass via --extra-vars
  - { option: "WALG_COMPRESSION_METHOD", value: "brotli" }  # or "lz4", "lzma", "zstd"
  - { option: "WALG_DELTA_MAX_STEPS", value: "6" }  # determines how many delta backups can be between full backups
  - { option: "PGDATA", value: "{{ postgresql_data_dir }}" }
  - { option: "PGHOST", value: "{{ postgresql_unix_socket_dir }}" }
  - { option: "PGPORT", value: "{{ postgresql_port }}" }
  - { option: "PGUSER", value: "{{ patroni_superuser_username }}" }
#  - { option: "AWS_S3_FORCE_PATH_STYLE", value: "true" }  # to use Minio.io S3-compatible storage
#  - { option: "AWS_ENDPOINT", value: "http://minio:9000" }  # to use Minio.io S3-compatible storage
#  - { option: "", value: "" }
wal_g_archive_command: "wal-g wal-push %p"
wal_g_patroni_cluster_bootstrap_command: "wal-g backup-fetch {{ postgresql_data_dir }} LATEST"

wal_g_cron_jobs:
  - name: "WAL-G: Create daily backup"
    user: "postgres"
    file: /etc/cron.d/walg
    minute: "30"
    hour: "3"
    day: "*"
    month: "*"
    weekday: "*"
    job: "[ $(curl -s -o /dev/null -w '%{http_code}' http://{{ inventory_hostname }}:{{ patroni_restapi_port }}) = '200' ] && wal-g backup-push {{ postgresql_data_dir }} > {{ postgresql_log_dir }}/walg_backup.log 2>&1"
  - name: "WAL-G: Delete old backups" # retain 4 full backups (adjust according to your company's backup retention policy)
    user: "postgres"
    file: /etc/cron.d/walg
    minute: "30"
    hour: "6"
    day: "*"
    month: "*"
    weekday: "*"
    job: "[ $(curl -s -o /dev/null -w '%{http_code}' http://{{ inventory_hostname }}:{{ patroni_restapi_port }}) = '200' ] && wal-g delete retain FULL 4 --confirm > {{ postgresql_log_dir }}/walg_delete.log 2>&1"

# pgBackRest
pgbackrest_install: false  # or 'true'
pgbackrest_install_from_pgdg_repo: true  # or 'false'
pgbackrest_stanza: "{{ patroni_cluster_name }}"  # specify your --stanza
pgbackrest_repo_type: "posix"  # or "s3", "gcs", "azure"
pgbackrest_repo_host: ""  # dedicated repository host (optional)
pgbackrest_repo_user: "postgres"
pgbackrest_conf_file: "/etc/pgbackrest/pgbackrest.conf"
# see more options https://pgbackrest.org/configuration.html
pgbackrest_conf:
  global:  # [global] section
    - { option: "log-level-file", value: "detail" }
    - { option: "log-path", value: "/var/log/pgbackrest" }
#    - { option: "repo1-host", value: "{{ pgbackrest_repo_host }}" }
#    - { option: "repo1-host-user", value: "{{ pgbackrest_repo_user }}" }
    - { option: "repo1-type", value: "{{ pgbackrest_repo_type | lower }}" }
    - { option: "repo1-path", value: "/var/lib/pgbackrest" }
    - { option: "repo1-retention-full", value: "4" }
    - { option: "repo1-retention-archive", value: "4" }
    - { option: "start-fast", value: "y" }
    - { option: "stop-auto", value: "y" }
    - { option: "resume", value: "n" }
    - { option: "link-all", value: "y" }
#    - { option: "", value: "" }
  stanza:  # [stanza_name] section
    - { option: "pg1-path", value: "{{ postgresql_data_dir }}" }
    - { option: "recovery-option", value: "recovery_target_action=promote" }
    - { option: "log-level-console", value: "info" }
    - { option: "process-max", value: "4" }
#    - { option: "", value: "" }
# (optional) dedicated backup server config (if "repo_host" is set)
pgbackrest_server_conf:
  global:
    - { option: "log-level-file", value: "detail" }
    - { option: "log-level-console", value: "info" }
    - { option: "log-path", value: "/var/log/pgbackrest" }
    - { option: "repo1-type", value: "{{ pgbackrest_repo_type | lower }}" }
    - { option: "repo1-path", value: "/var/lib/pgbackrest" }
    - { option: "repo1-retention-full", value: "4" }
    - { option: "repo1-retention-archive", value: "4" }
    - { option: "repo1-bundle", value: "y" }
    - { option: "repo1-block", value: "y" }
    - { option: "start-fast", value: "y" }
    - { option: "stop-auto", value: "y" }
    - { option: "resume", value: "n" }
    - { option: "link-all", value: "y" }
    - { option: "archive-check", value: "y" }
    - { option: "archive-copy", value: "n" }
    - { option: "backup-standby", value: "y" }
#    - { option: "", value: "" }
# the stanza section will be generated automatically

pgbackrest_archive_command: "pgbackrest --stanza={{ pgbackrest_stanza }} archive-push %p"

pgbackrest_patroni_cluster_restore_command:
  '/usr/bin/pgbackrest --stanza={{ pgbackrest_stanza }} --delta restore'  # restore from latest backup
#  '/usr/bin/pgbackrest --stanza={{ pgbackrest_stanza }} --type=time "--target=2020-06-01 11:00:00+03" --delta restore'  # Point-in-Time Recovery (example)

# By default, the cron jobs is created on the database server.
# If 'repo_host' is defined, the cron jobs will be created on the pgbackrest server.
pgbackrest_cron_jobs:
  - name: "pgBackRest: Full Backup"
    file: /etc/cron.d/pgbackrest
    user: "postgres"
    minute: "30"
    hour: "6"
    day: "*"
    month: "*"
    weekday: "0"
    job: "pgbackrest --type=full --stanza={{ pgbackrest_stanza }} backup"
    # job: "if [ $(psql -tAXc 'select pg_is_in_recovery()') = 'f' ]; then pgbackrest --type=full --stanza={{ pgbackrest_stanza }} backup; fi"
  - name: "pgBackRest: Diff Backup"
    file: /etc/cron.d/pgbackrest
    user: "postgres"
    minute: "30"
    hour: "6"
    day: "*"
    month: "*"
    weekday: "1-6"
    job: "pgbackrest --type=diff --stanza={{ pgbackrest_stanza }} backup"
    # job: "if [ $(psql -tAXc 'select pg_is_in_recovery()') = 'f' ]; then pgbackrest --type=diff --stanza={{ pgbackrest_stanza }} backup; fi"


# PITR mode (if patroni_cluster_bootstrap_method: "pgbackrest" or "wal-g"):
# 1) The database cluster directory will be cleaned (for "wal-g") or overwritten (for "pgbackrest" --delta restore).
# 2) And also the patroni cluster "{{ patroni_cluster_name }}" will be removed from the DCS (if exist) before recovery.

disable_archive_command: true  # or 'false' to not disable archive_command after restore
keep_patroni_dynamic_json: true  # or 'false' to remove patroni.dynamic.json after restore (if exists)


# Netdata - https://github.com/netdata/netdata
netdata_install: false  # or 'true' for install Netdata on postgresql cluster nodes (with kickstart.sh)
netdata_install_options: "--stable-channel --disable-telemetry --dont-wait"
netdata_conf:
  web_bind_to: "*"
  # https://learn.netdata.cloud/docs/store/change-metrics-storage
  memory_mode: "dbengine"  # The long-term metrics storage with efficient RAM and disk usage.
  page_cache_size: 64  # Determines the amount of RAM in MiB that is dedicated to caching Netdata metric values.
  dbengine_disk_space: 1024  # Determines the amount of disk space in MiB that is dedicated to storing Netdata metric values.

...