Merge branch 'avar/nuke-test_i18ngrep' into build-master

* avar/nuke-test_i18ngrep:
  tests with git#10 test_i18ngrep: replace it with 'grep'
  tests with git#9 test_i18ngrep: replace it with 'grep'
  tests with git#8 test_i18ngrep: replace it with 'grep'
  tests with #7 test_i18ngrep: replace it with 'grep'
  tests with git#6 test_i18ngrep: replace it with 'grep'
  tests with #5 test_i18ngrep: replace it with 'grep'
  tests with #4 test_i18ngrep: replace it with 'grep'
  tests with #3 test_i18ngrep: replace it with 'grep'
  tests with #2 test_i18ngrep: replace it with 'grep'
  tests with #1 test_i18ngrep: replace it with 'grep'

Author: avar

t/lib-httpd.sh

@@ -227,7 +227,7 @@ test_http_push_nonff () {
 	'
 
 	test_expect_success 'non-fast-forward push shows help message' '
-		test_i18ngrep "Updates were rejected because" output
+		grep "Updates were rejected because" output
 	'
 
 	test_expect_${EXPECT_CAS_RESULT} 'force with lease aka cas' '

t/lib-submodule-update.sh

@@ -830,7 +830,7 @@ test_submodule_recursing_with_args_common () {
 			cd submodule_update &&
 			git branch -t invalid_sub1 origin/invalid_sub1 &&
 			test_must_fail $command invalid_sub1 2>err &&
-			test_i18ngrep sub1 err &&
+			grep sub1 err &&
 			test_superproject_content origin/add_sub1 &&
 			test_submodule_content sub1 origin/add_sub1
 		)

t/t0001-init.sh

@@ -168,8 +168,8 @@ test_expect_success 'reinit' '
 		git -c init.defaultBranch=initial init >out1 2>err1 &&
 		git init >out2 2>err2
 	) &&
-	test_i18ngrep "Initialized empty" again/out1 &&
-	test_i18ngrep "Reinitialized existing" again/out2 &&
+	grep "Initialized empty" again/out1 &&
+	grep "Reinitialized existing" again/out2 &&
 	test_must_be_empty again/err1 &&
 	test_must_be_empty again/err2
 '
@@ -332,15 +332,15 @@ test_expect_success 'init with separate gitdir' '
 
 test_expect_success 'explicit bare & --separate-git-dir incompatible' '
 	test_must_fail git init --bare --separate-git-dir goop.git bare.git 2>err &&
-	test_i18ngrep "cannot be used together" err
+	grep "cannot be used together" err
 '
 
 test_expect_success 'implicit bare & --separate-git-dir incompatible' '
 	test_when_finished "rm -rf bare.git" &&
 	mkdir -p bare.git &&
 	test_must_fail env GIT_DIR=. \
 		git -C bare.git init --separate-git-dir goop.git 2>err &&
-	test_i18ngrep "incompatible" err
+	grep "incompatible" err
 '
 
 test_expect_success 'bare & --separate-git-dir incompatible within worktree' '
@@ -349,7 +349,7 @@ test_expect_success 'bare & --separate-git-dir incompatible within worktree' '
 	git clone --bare . bare.git &&
 	git -C bare.git worktree add --detach ../linkwt &&
 	test_must_fail git -C linkwt init --separate-git-dir seprepo 2>err &&
-	test_i18ngrep "incompatible" err
+	grep "incompatible" err
 '
 
 test_lazy_prereq GETCWD_IGNORES_PERMS '
@@ -563,7 +563,7 @@ test_expect_success '--initial-branch' '
 
 	: re-initializing should not change the branch name &&
 	git init --initial-branch=ignore initial-branch-option 2>err &&
-	test_i18ngrep "ignored --initial-branch" err &&
+	grep "ignored --initial-branch" err &&
 	git -C initial-branch-option symbolic-ref HEAD >actual &&
 	grep hello actual
 '
@@ -579,7 +579,7 @@ test_expect_success 'advice on unconfigured init.defaultBranch' '
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME= git -c color.advice=always \
 		init unconfigured-default-branch-name 2>err &&
 	test_decode_color <err >decoded &&
-	test_i18ngrep "<YELLOW>hint: " decoded
+	grep "<YELLOW>hint: " decoded
 '
 
 test_expect_success 'overridden default main branch name (env)' '
@@ -592,7 +592,7 @@ test_expect_success 'overridden default main branch name (env)' '
 test_expect_success 'invalid default branch name' '
 	test_must_fail env GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME="with space" \
 		git init initial-branch-invalid 2>err &&
-	test_i18ngrep "invalid branch name" err
+	grep "invalid branch name" err
 '
 
 test_expect_success 'branch -m with the initial branch' '

t/t0002-gitfile.sh

@@ -22,13 +22,13 @@ test_expect_success 'initial setup' '
 test_expect_success 'bad setup: invalid .git file format' '
 	echo "gitdir $REAL" >.git &&
 	test_must_fail git rev-parse 2>.err &&
-	test_i18ngrep "invalid gitfile format" .err
+	grep "invalid gitfile format" .err
 '
 
 test_expect_success 'bad setup: invalid .git file path' '
 	echo "gitdir: $REAL.not" >.git &&
 	test_must_fail git rev-parse 2>.err &&
-	test_i18ngrep "not a git repository" .err
+	grep "not a git repository" .err
 '
 
 test_expect_success 'final setup + check rev-parse --git-dir' '

t/t0003-attributes.sh

@@ -250,7 +250,7 @@ test_expect_success 'root subdir attribute test' '
 test_expect_success 'negative patterns' '
 	echo "!f test=bar" >.gitattributes &&
 	git check-attr test -- '"'"'!f'"'"' 2>errors &&
-	test_i18ngrep "Negative patterns are ignored" errors
+	grep "Negative patterns are ignored" errors
 '
 
 test_expect_success 'patterns starting with exclamation' '
@@ -415,7 +415,7 @@ test_expect_success SYMLINKS 'symlinks not respected in-tree' '
 	mkdir subdir &&
 	ln -s ../attr subdir/.gitattributes &&
 	attr_check_basic subdir/file unspecified &&
-	test_i18ngrep "unable to access.*gitattributes" err
+	grep "unable to access.*gitattributes" err
 '
 
 test_expect_success 'large attributes line ignored in tree' '

t/t0008-ignores.sh

@@ -49,7 +49,7 @@ broken_c_unquote_verbose () {
 
 stderr_contains () {
 	regexp="$1"
-	if test_i18ngrep "$regexp" "$HOME/stderr"
+	if grep "$regexp" "$HOME/stderr"
 	then
 		return 0
 	else
@@ -942,7 +942,7 @@ test_expect_success SYMLINKS 'symlinks not respected in-tree' '
 	ln -s ignore subdir/.gitignore &&
 	test_must_fail git check-ignore subdir/file >actual 2>err &&
 	test_must_be_empty actual &&
-	test_i18ngrep "unable to access.*gitignore" err
+	grep "unable to access.*gitignore" err
 '
 
 test_done

t/t0012-help.sh

@@ -100,17 +100,17 @@ test_expect_success "--help does not work for guides" "
 
 test_expect_success 'git help' '
 	git help >help.output &&
-	test_i18ngrep "^   clone  " help.output &&
-	test_i18ngrep "^   add    " help.output &&
-	test_i18ngrep "^   log    " help.output &&
-	test_i18ngrep "^   commit " help.output &&
-	test_i18ngrep "^   fetch  " help.output
+	grep "^   clone  " help.output &&
+	grep "^   add    " help.output &&
+	grep "^   log    " help.output &&
+	grep "^   commit " help.output &&
+	grep "^   fetch  " help.output
 '
 
 test_expect_success 'git help -g' '
 	git help -g >help.output &&
-	test_i18ngrep "^   everyday   " help.output &&
-	test_i18ngrep "^   tutorial   " help.output
+	grep "^   everyday   " help.output &&
+	grep "^   tutorial   " help.output
 '
 
 test_expect_success 'git help fails for non-existing html pages' '
@@ -259,7 +259,7 @@ do
 			export GIT_CEILING_DIRECTORIES &&
 			test_expect_code 129 git -C sub $builtin -h >output 2>&1
 		) &&
-		test_i18ngrep usage output
+		grep usage output
 	'
 done <builtins
 

t/t0013-sha1dc.sh

@@ -16,7 +16,7 @@ fi
 
 test_expect_success 'test-sha1 detects shattered pdf' '
 	test_must_fail test-tool sha1 <"$TEST_DATA/shattered-1.pdf" 2>err &&
-	test_i18ngrep collision err &&
+	grep collision err &&
 	grep 38762cf7f55934b34d179ae6a4c80cadccbb7f0a err
 '
 

t/t0014-alias.sh

@@ -8,23 +8,23 @@ test_expect_success 'nested aliases - internal execution' '
 	git config alias.nested-internal-1 nested-internal-2 &&
 	git config alias.nested-internal-2 status &&
 	git nested-internal-1 >output &&
-	test_i18ngrep "^On branch " output
+	grep "^On branch " output
 '
 
 test_expect_success 'nested aliases - mixed execution' '
 	git config alias.nested-external-1 nested-external-2 &&
 	git config alias.nested-external-2 "!git nested-external-3" &&
 	git config alias.nested-external-3 status &&
 	git nested-external-1 >output &&
-	test_i18ngrep "^On branch " output
+	grep "^On branch " output
 '
 
 test_expect_success 'looping aliases - internal execution' '
 	git config alias.loop-internal-1 loop-internal-2 &&
 	git config alias.loop-internal-2 loop-internal-3 &&
 	git config alias.loop-internal-3 loop-internal-2 &&
 	test_must_fail git loop-internal-1 2>output &&
-	test_i18ngrep "^fatal: alias loop detected: expansion of" output
+	grep "^fatal: alias loop detected: expansion of" output
 '
 
 # This test is disabled until external loops are fixed, because would block
@@ -34,7 +34,7 @@ test_expect_success 'looping aliases - internal execution' '
 #	git config alias.loop-mixed-1 loop-mixed-2 &&
 #	git config alias.loop-mixed-2 "!git loop-mixed-1" &&
 #	test_must_fail git loop-mixed-1 2>output &&
-#	test_i18ngrep "^fatal: alias loop detected: expansion of" output
+#	grep "^fatal: alias loop detected: expansion of" output
 #'
 
 test_expect_success 'run-command formats empty args properly' '

t/t0021-conversion.sh

@@ -263,7 +263,7 @@ test_expect_success 'required filter with absent clean field' '
 
 	echo test >test.ac &&
 	test_must_fail git add test.ac 2>stderr &&
-	test_i18ngrep "fatal: test.ac: clean filter .absentclean. failed" stderr
+	grep "fatal: test.ac: clean filter .absentclean. failed" stderr
 '
 
 test_expect_success 'required filter with absent smudge field' '
@@ -276,7 +276,7 @@ test_expect_success 'required filter with absent smudge field' '
 	git add test.as &&
 	rm -f test.as &&
 	test_must_fail git checkout -- test.as 2>stderr &&
-	test_i18ngrep "fatal: test.as: smudge filter absentsmudge failed" stderr
+	grep "fatal: test.as: smudge filter absentsmudge failed" stderr
 '
 
 test_expect_success 'filtering large input to small output should use little memory' '
@@ -733,7 +733,7 @@ test_expect_success 'process filter should restart after unexpected write failur
 		git checkout --quiet --no-progress . 2>git-stderr.log &&
 
 		grep "smudge write error" git-stderr.log &&
-		test_i18ngrep "error: external filter" git-stderr.log &&
+		grep "error: external filter" git-stderr.log &&
 
 		cat >expected.log <<-EOF &&
 			START

t/t0040-parse-options.sh

@@ -365,13 +365,13 @@ test_expect_success 'OPT_CMDMODE() works' '
 test_expect_success 'OPT_CMDMODE() detects incompatibility' '
 	test_must_fail test-tool parse-options --mode1 --mode2 >output 2>output.err &&
 	test_must_be_empty output &&
-	test_i18ngrep "incompatible with --mode" output.err
+	grep "incompatible with --mode" output.err
 '
 
 test_expect_success 'OPT_CMDMODE() detects incompatibility with something else' '
 	test_must_fail test-tool parse-options --set23 --mode2 >output 2>output.err &&
 	test_must_be_empty output &&
-	test_i18ngrep "incompatible with something else" output.err
+	grep "incompatible with something else" output.err
 '
 
 test_expect_success 'OPT_COUNTUP() with PARSE_OPT_NODASH works' '

t/t0061-run-command.sh

@@ -19,12 +19,12 @@ test_expect_success MINGW 'subprocess inherits only std handles' '
 
 test_expect_success 'start_command reports ENOENT (slash)' '
 	test-tool run-command start-command-ENOENT ./does-not-exist 2>err &&
-	test_i18ngrep "\./does-not-exist" err
+	grep "\./does-not-exist" err
 '
 
 test_expect_success 'start_command reports ENOENT (no slash)' '
 	test-tool run-command start-command-ENOENT does-not-exist 2>err &&
-	test_i18ngrep "does-not-exist" err
+	grep "does-not-exist" err
 '
 
 test_expect_success 'run_command can run a command' '
@@ -49,7 +49,7 @@ test_expect_success !RUNS_COMMANDS_FROM_PWD 'run_command is restricted to PATH'
 	echo yikes
 	EOF
 	test_must_fail test-tool run-command run-command should-not-run 2>err &&
-	test_i18ngrep "should-not-run" err
+	grep "should-not-run" err
 '
 
 test_expect_success !MINGW 'run_command can run a script without a #! line' '

t/t0070-fundamental.sh

@@ -44,13 +44,13 @@ test_expect_success 'incomplete sideband messages are reassembled' '
 test_expect_success 'eof on sideband message is reported' '
 	printf 1234 >input &&
 	test-tool pkt-line receive-sideband <input 2>err &&
-	test_i18ngrep "unexpected disconnect" err
+	grep "unexpected disconnect" err
 '
 
 test_expect_success 'missing sideband designator is reported' '
 	printf 0004 >input &&
 	test-tool pkt-line receive-sideband <input 2>err &&
-	test_i18ngrep "missing sideband" err
+	grep "missing sideband" err
 '
 
 test_done

t/t0091-bugreport.sh

@@ -44,7 +44,7 @@ test_expect_success '--output-directory puts the report in the provided dir' '
 
 test_expect_success 'incorrect arguments abort with usage' '
 	test_must_fail git bugreport --false 2>output &&
-	test_i18ngrep usage output &&
+	grep usage output &&
 	test_path_is_missing git-bugreport-*
 '
 

t/t0300-credentials.sh

@@ -715,7 +715,7 @@ test_expect_success 'credential config with partial URLs' '
 	git -c credential.$partial.helper=yep \
 		-c credential.with%0anewline.username=uh-oh \
 		credential fill <stdin >stdout 2>stderr &&
-	test_i18ngrep "skipping credential lookup for key" stderr
+	grep "skipping credential lookup for key" stderr
 '
 
 test_done

t/t1060-object-corruption.sh

@@ -125,7 +125,7 @@ test_expect_success 'fetch into corrupted repo with index-pack' '
 		cd bit-error-cp &&
 		test_must_fail git -c transfer.unpackLimit=1 \
 			fetch ../no-bit-error 2>stderr &&
-		test_i18ngrep ! -i collision stderr
+		! grep -i collision stderr
 	)
 '
 

t/t1092-sparse-checkout-compatibility.sh

@@ -337,8 +337,8 @@ test_expect_success 'status reports sparse-checkout' '
 	init_repos &&
 	git -C sparse-checkout status >full &&
 	git -C sparse-index status >sparse &&
-	test_i18ngrep "You are in a sparse checkout with " full &&
-	test_i18ngrep "You are in a sparse checkout." sparse
+	grep "You are in a sparse checkout with " full &&
+	grep "You are in a sparse checkout." sparse
 '
 
 test_expect_success 'add, commit, checkout' '
@@ -1182,7 +1182,7 @@ test_expect_success 'checkout-index outside sparse definition' '
 	# Without --ignore-skip-worktree-bits, outside-of-cone files will trigger
 	# an error
 	test_sparse_match test_must_fail git checkout-index -- folder1/a &&
-	test_i18ngrep "folder1/a has skip-worktree enabled" sparse-checkout-err &&
+	grep "folder1/a has skip-worktree enabled" sparse-checkout-err &&
 	test_path_is_missing folder1/a &&
 
 	# With --ignore-skip-worktree-bits, outside-of-cone files are checked out

t/t1307-config-blob.sh

@@ -63,7 +63,7 @@ test_expect_success 'parse errors in blobs are properly attributed' '
 	git commit -m broken &&
 
 	test_must_fail git config --blob=HEAD:config some.value 2>err &&
-	test_i18ngrep "HEAD:config" err
+	grep "HEAD:config" err
 '
 
 test_expect_success 'can parse blob ending with CR' '

t/t1308-config-set.sh

@@ -127,7 +127,7 @@ test_expect_success 'find string value for a key' '
 
 test_expect_success 'check line error when NULL string is queried' '
 	test_expect_code 128 test-tool config get_string case.foo 2>result &&
-	test_i18ngrep "fatal: .*case\.foo.*\.git/config.*line 7" result
+	grep "fatal: .*case\.foo.*\.git/config.*line 7" result
 '
 
 test_expect_success 'find integer if value is non parse-able' '
@@ -268,14 +268,14 @@ test_expect_success 'check line errors for malformed values' '
 		br
 	EOF
 	test_expect_code 128 git br 2>result &&
-	test_i18ngrep "missing value for .alias\.br" result &&
-	test_i18ngrep "fatal: .*\.git/config" result &&
-	test_i18ngrep "fatal: .*line 2" result
+	grep "missing value for .alias\.br" result &&
+	grep "fatal: .*\.git/config" result &&
+	grep "fatal: .*line 2" result
 '
 
 test_expect_success 'error on modifying repo config without repo' '
 	nongit test_must_fail git config a.b c 2>err &&
-	test_i18ngrep "not in a git directory" err
+	grep "not in a git directory" err
 '
 
 cmdline_config="'foo.bar=from-cmdline'"

t/t1309-early-config.sh

@@ -78,7 +78,7 @@ test_with_config () {
 
 test_expect_success 'ignore .git/ with incompatible repository version' '
 	test_with_config "[core]repositoryformatversion = 999999" 2>err &&
-	test_i18ngrep "warning:.* Expected git repo version <= [1-9]" err
+	grep "warning:.* Expected git repo version <= [1-9]" err
 '
 
 test_expect_failure 'ignore .git/ with invalid repository version' '