Esp.h

/*
 Esp.h - ESP8266-specific APIs
 Copyright (c) 2015 Ivan Grokhotkov. All rights reserved.
 This file is part of the esp8266 core for Arduino environment.

 This library is free software; you can redistribute it and/or
 modify it under the terms of the GNU Lesser General Public
 License as published by the Free Software Foundation; either
 version 2.1 of the License, or (at your option) any later version.

 This library is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 Lesser General Public License for more details.

 You should have received a copy of the GNU Lesser General Public
 License along with this library; if not, write to the Free Software
 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#ifndef ESP_H
#define ESP_H

#include <Arduino.h>
#include "core_esp8266_features.h"
#include "spi_vendors.h"

/**
 * AVR macros for WDT managment
 */
typedef enum {
    WDTO_0MS    = 0,   //!< WDTO_0MS
    WDTO_15MS   = 15,  //!< WDTO_15MS
    WDTO_30MS   = 30,  //!< WDTO_30MS
    WDTO_60MS   = 60,  //!< WDTO_60MS
    WDTO_120MS  = 120, //!< WDTO_120MS
    WDTO_250MS  = 250, //!< WDTO_250MS
    WDTO_500MS  = 500, //!< WDTO_500MS
    WDTO_1S     = 1000,//!< WDTO_1S
    WDTO_2S     = 2000,//!< WDTO_2S
    WDTO_4S     = 4000,//!< WDTO_4S
    WDTO_8S     = 8000 //!< WDTO_8S
} WDTO_t;


#define wdt_enable(time)    ESP.wdtEnable(time)
#define wdt_disable()       ESP.wdtDisable()
#define wdt_reset()         ESP.wdtFeed()

#define cli()        ets_intr_lock()       // IRQ Disable
#define sei()        ets_intr_unlock()     // IRQ Enable

enum RFMode {
    RF_DEFAULT = 0, // RF_CAL or not after deep-sleep wake up, depends on init data byte 108.
    RF_CAL = 1,      // RF_CAL after deep-sleep wake up, there will be large current.
    RF_NO_CAL = 2,   // no RF_CAL after deep-sleep wake up, there will only be small current.
    RF_DISABLED = 4 // disable RF after deep-sleep wake up, just like modem sleep, there will be the smallest current.
};

#define RF_MODE(mode) int __get_rf_mode() { return mode; }
#define RF_PRE_INIT() void __run_user_rf_pre_init()

// compatibility definitions
#define WakeMode RFMode
#define WAKE_RF_DEFAULT  RF_DEFAULT
#define WAKE_RFCAL       RF_CAL
#define WAKE_NO_RFCAL    RF_NO_CAL
#define WAKE_RF_DISABLED RF_DISABLED

enum ADCMode {
    ADC_TOUT = 33,
    ADC_TOUT_3V3 = 33,
    ADC_VCC = 255,
    ADC_VDD = 255
};

#define ADC_MODE(mode) int __get_adc_mode(void) { return (int) (mode); }

typedef enum {
     FM_QIO = 0x00,
     FM_QOUT = 0x01,
     FM_DIO = 0x02,
     FM_DOUT = 0x03,
     FM_UNKNOWN = 0xff
} FlashMode_t;

class EspClass {
    public:
        // TODO: figure out how to set WDT timeout
        void wdtEnable(uint32_t timeout_ms = 0);
        // note: setting the timeout value is not implemented at the moment
        void wdtEnable(WDTO_t timeout_ms = WDTO_0MS);

        void wdtDisable();
        void wdtFeed();

        void deepSleep(uint64_t time_us, RFMode mode = RF_DEFAULT);
        void deepSleepInstant(uint64_t time_us, RFMode mode = RF_DEFAULT);
        uint64_t deepSleepMax();

        bool rtcUserMemoryRead(uint32_t offset, uint32_t *data, size_t size);
        bool rtcUserMemoryWrite(uint32_t offset, uint32_t *data, size_t size);

        void reset();
        void restart();

        uint16_t getVcc();
        uint32_t getChipId();

        uint32_t getFreeHeap();
        uint16_t getMaxFreeBlockSize();
        uint8_t getHeapFragmentation(); // in %
        void getHeapStats(uint32_t* free = nullptr, uint16_t* max = nullptr, uint8_t* frag = nullptr);

        uint32_t getFreeContStack();
        void resetFreeContStack();

        const char * getSdkVersion();
        String getCoreVersion();
        String getFullVersion();

        uint8_t getBootVersion();
        uint8_t getBootMode();

#if defined(F_CPU) || defined(CORE_MOCK)
        constexpr 
#endif
            inline uint8_t getCpuFreqMHz() const __attribute__((always_inline))
        {
            return esp_get_cpu_freq_mhz();
        }

        uint32_t getFlashChipId();
        uint8_t getFlashChipVendorId();

        //gets the actual chip size based on the flash id
        uint32_t getFlashChipRealSize();
        //gets the size of the flash as set by the compiler
        uint32_t getFlashChipSize();
        uint32_t getFlashChipSpeed();
        FlashMode_t getFlashChipMode();
        uint32_t getFlashChipSizeByChipId();

        uint32_t magicFlashChipSize(uint8_t byte);
        uint32_t magicFlashChipSpeed(uint8_t byte);
        FlashMode_t magicFlashChipMode(uint8_t byte);

        bool checkFlashConfig(bool needsEquals = false);

        bool checkFlashCRC();

        bool flashEraseSector(uint32_t sector);
        /**
         * @brief Write @a size bytes from @a data to flash at @a address
         * This overload requires @a data and @a size to be always 4 byte aligned and
         * @a address to be 4 byte aligned if the write crossess page boundary,
         * but guarantees no overhead (except on PUYA flashes)
         * @param address address on flash where write should start, 4 byte alignment is conditional
         * @param data input buffer, must be 4-byte aligned
         * @param size amount of data, must be a multiple of 4
         * @return bool result of operation
         * @retval true success
         * @retval false failure to write to flash or incorrect alignment of params
         */
        bool flashWrite(uint32_t address, const uint32_t *data, size_t size);
        /**
         * @brief Write @a size bytes from @a data to flash at @a address
         * This overload handles all misalignment cases
         * @param address address on flash where write should start
         * @param data input buffer, passing unaligned memory will cause significant stack usage
         * @param size amount of data, passing not multiple of 4 will cause additional reads and writes
         * @return bool result of operation
         */
        bool flashWrite(uint32_t address, const uint8_t *data, size_t size);
        /**
         * @brief Read @a size bytes to @a data to flash at @a address
         * This overload requires @a data and @a size to be 4 byte aligned
         * @param address address on flash where read should start
         * @param data input buffer, must be 4-byte aligned
         * @param size amount of data, must be a multiple of 4
         * @return bool result of operation
         * @retval true success
         * @retval false failure to read from flash or incorrect alignment of params
         */
        bool flashRead(uint32_t address, uint32_t *data, size_t size);
        /**
         * @brief Read @a size bytes to @a data to flash at @a address
         * This overload handles all misalignment cases
         * @param address address on flash where read should start
         * @param data input buffer, passing unaligned memory will cause significant stack usage
         * @param size amount of data, passing not multiple of 4 will cause additional read
         * @return bool result of operation
         */
        bool flashRead(uint32_t address, uint8_t *data, size_t size);

        uint32_t getSketchSize();
        String getSketchMD5();
        uint32_t getFreeSketchSpace();
        bool updateSketch(Stream& in, uint32_t size, bool restartOnFail = false, bool restartOnSuccess = true);

        String getResetReason();
        String getResetInfo();
        struct rst_info * getResetInfoPtr();

        bool eraseConfig();

        uint8_t *random(uint8_t *resultArray, const size_t outputSizeBytes) const;
        uint32_t random() const;

#if !defined(CORE_MOCK)
        inline uint32_t getCycleCount() __attribute__((always_inline))
        {
            return esp_get_cycle_count();
        }
#else
        uint32_t getCycleCount();
#endif // !defined(CORE_MOCK)
    private:
        /**
         * @brief Replaces @a byteCount bytes of a 4 byte block on flash
         *
         * @param address flash address
         * @param value buffer with data
         * @param byteCount number of bytes to replace
         * @return bool result of operation
         * @retval true success
         * @retval false failed to read/write or invalid args
         */
        bool flashReplaceBlock(uint32_t address, const uint8_t *value, uint32_t byteCount);
        /**
         * @brief Write up to @a size bytes from @a data to flash at @a address
         * This function takes case of unaligned memory acces by copying @a data to a temporary buffer,
         * it also takes care of page boundary crossing see @a flashWritePageBreak as to why it's done.
         * Less than @a size bytes may be written, due to 4 byte alignment requirement of spi_flash_write
         * @param address address on flash where write should start
         * @param data input buffer
         * @param size amount of data
         * @return size_t amount of data written, 0 on failure
         */
        size_t flashWriteUnalignedMemory(uint32_t address, const uint8_t *data, size_t size);
        /**
         * @brief Splits up to 4 bytes into 4 byte blocks and writes them to flash
         * We need this since spi_flash_write cannot handle writing over a page boundary with unaligned offset
         * i.e. spi_flash_write(254, data, 4) will fail, also we cannot write less bytes as in
         * spi_flash_write(254, data, 2) since it will be extended internally to 4 bytes and fail
         * @param address start of write
         * @param data data to be written
         * @param size amount of data, must be < 4
         * @return bool result of operation
         */
        bool flashWritePageBreak(uint32_t address, const uint8_t *data, size_t size);
};

extern EspClass ESP;

#endif //ESP_H