[upload] Error 1

[nth1314]

Processing pico (platform: https://github.com/maxgerhardt/platform-raspberrypi.git; board: pico; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/raspberrypi/pico.html
PLATFORM: Raspberry Pi RP2040 (1.14.0+sha.196d31b) > Raspberry Pi Pico
HARDWARE: RP2040 133MHz, 264KB RAM, 2MB Flash
DEBUG: Current (blackmagic) External (blackmagic, cmsis-dap, jlink, pico-debug, picoprobe, raspberrypi-swd)
PACKAGES:

• framework-arduinopico @ 1.40001.0+sha.7a9c427
• tool-mklittlefs-rp2040-earlephilhower @ 5.100300.230216 (10.3.0)
• tool-openocd-rp2040-earlephilhower @ 5.120300.240125 (12.3.0)
• tool-rp2040tools @ 1.0.2
• toolchain-rp2040-earlephilhower @ 5.120300.240125 (12.3.0)
  Flash size: 2.00MB
  Sketch size: 2.00MB
  Filesystem size: 0.00MB
  Maximium Sketch size: 2093056 EEPROM start: 0x101ff000 Filesystem start: 0x101ff000 Filesystem end: 0x101ff000
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 65 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- Wire @ 1.0
  |-- AccelStepper @ 1.61
  Building in release mode
  Retrieving maximum program size .pio\build\pico\firmware.elf
  Flash size: 2.00MB
  Sketch size: 2.00MB
  Filesystem size: 0.00MB
  Maximium Sketch size: 2093056 EEPROM start: 0x101ff000 Filesystem start: 0x101ff000 Filesystem end: 0x101ff000
  Checking size .pio\build\pico\firmware.elf
  Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
  RAM: [ ] 4.0% (used 10592 bytes from 262144 bytes)
  Flash: [ ] 3.0% (used 62404 bytes from 2093056 bytes)
  Configuring upload protocol...
  AVAILABLE: blackmagic, cmsis-dap, jlink, pico-debug, picoprobe, picotool, raspberrypi-swd
  CURRENT: upload_protocol = picotool
  Looking for upload port...
  Using manually specified: COM9
  Forcing reset using 1200bps open/close on port COM9
  Uploading .pio\build\pico\firmware.elf
  rp2040load 1.0.1 - compiled with go1.15.8
  .....................
  *** [upload] Error 1
  ======================================================= [FAILED] Took 13.85 seconds =======================================================