Skip to content

Commit 6d62775

Browse files
ladyadaladyada
authored
feather esp32-s3 hardware definition and bootloader (#6450)
* feather esp32-s3 hardware definition and bootloader * fix bootloader addr (!?) * fix esp32s2 bootloader to latest version with right url and favvvvvicon * add qt py, simplify menus by removing flash size (fixed 8mb), psram (disabled) and upload (usb mode only) * add qtpy variant * remove flash interface type (upload dio, boot qio) * finish qtpy s3 definition
1 parent 6f3ffce commit 6d62775

File tree

13 files changed

+511
-0
lines changed

13 files changed

+511
-0
lines changed

‎boards.txt

+282
Large diffs are not rendered by default.

‎variants/adafruit_feather_esp32s2/bootloader.bin

-336 Bytes
Binary file not shown.

‎variants/adafruit_feather_esp32s2/tinyuf2.bin

18.8 KB
Binary file not shown.

‎variants/adafruit_feather_esp32s3_nopsram/bootloader.bin

22.1 KB
Binary file not shown.

‎variants/adafruit_feather_esp32s3_nopsram/partitions.csv

+10
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,10 @@
1+
# ESP-IDF Partition Table
2+
# Name, Type, SubType, Offset, Size, Flags
3+
# bootloader.bin,, 0x1000, 32K
4+
# partition table,, 0x8000, 4K
5+
nvs, data, nvs, 0x9000, 20K,
6+
otadata, data, ota, 0xe000, 8K,
7+
ota_0, 0, ota_0, 0x10000, 2048K,
8+
ota_1, 0, ota_1, 0x210000, 2048K,
9+
uf2, app, factory,0x410000, 256K,
10+
ffat, data, fat, 0x450000, 3776K,

‎variants/adafruit_feather_esp32s3_nopsram/pins_arduino.h

+71
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,71 @@
1+
#ifndef Pins_Arduino_h
2+
#define Pins_Arduino_h
3+
4+
#include <stdint.h>
5+
6+
#define USB_VID 0x239A
7+
#define USB_PID 0x8113
8+
#define USB_MANUFACTURER "Adafruit"
9+
#define USB_PRODUCT "Feather ESP32-S3 No PSRAM"
10+
#define USB_SERIAL "" // Empty string for MAC adddress
11+
12+
#define EXTERNAL_NUM_INTERRUPTS 46
13+
#define NUM_DIGITAL_PINS 48
14+
#define NUM_ANALOG_INPUTS 20
15+
16+
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
17+
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
18+
#define digitalPinHasPWM(p) (p < 46)
19+
20+
#define LED_BUILTIN 13
21+
22+
#define PIN_NEOPIXEL 33
23+
#define NEOPIXEL_NUM 1 // number of neopixels
24+
#define NEOPIXEL_POWER 21 // power pin
25+
#define NEOPIXEL_POWER_ON HIGH // power pin state when on
26+
#define I2C_POWER 7 // I2C power pin
27+
#define PIN_I2C_POWER 7 // I2C power pin
28+
29+
30+
static const uint8_t TX = 39;
31+
static const uint8_t RX = 38;
32+
#define TX1 TX
33+
#define RX1 RX
34+
35+
static const uint8_t SDA = 3;
36+
static const uint8_t SCL = 4;
37+
38+
static const uint8_t SS = 42;
39+
static const uint8_t MOSI = 35;
40+
static const uint8_t SCK = 36;
41+
static const uint8_t MISO = 37;
42+
43+
static const uint8_t A0 = 18;
44+
static const uint8_t A1 = 17;
45+
static const uint8_t A2 = 16;
46+
static const uint8_t A3 = 15;
47+
static const uint8_t A4 = 14;
48+
static const uint8_t A5 = 8;
49+
static const uint8_t A6 = 3;
50+
static const uint8_t A7 = 4;
51+
static const uint8_t A8 = 5;
52+
static const uint8_t A9 = 6;
53+
static const uint8_t A10 = 9;
54+
static const uint8_t A11 = 10;
55+
static const uint8_t A12 = 11;
56+
static const uint8_t A13 = 12;
57+
static const uint8_t A14 = 13;
58+
59+
static const uint8_t T3 = 3;
60+
static const uint8_t T4 = 4;
61+
static const uint8_t T5 = 5;
62+
static const uint8_t T6 = 6;
63+
static const uint8_t T8 = 8;
64+
static const uint8_t T9 = 9;
65+
static const uint8_t T10 = 10;
66+
static const uint8_t T11 = 11;
67+
static const uint8_t T12 = 12;
68+
static const uint8_t T13 = 13;
69+
static const uint8_t T14 = 14;
70+
71+
#endif /* Pins_Arduino_h */

‎variants/adafruit_feather_esp32s3_nopsram/tinyuf2.bin

161 KB
Binary file not shown.

‎variants/adafruit_feather_esp32s3_nopsram/variant.cpp

+43
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,43 @@
1+
/*
2+
* The MIT License (MIT)
3+
*
4+
* Copyright (c) 2021 Ha Thach (tinyusb.org) for Adafruit Industries
5+
*
6+
* Permission is hereby granted, free of charge, to any person obtaining a copy
7+
* of this software and associated documentation files (the "Software"), to deal
8+
* in the Software without restriction, including without limitation the rights
9+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10+
* copies of the Software, and to permit persons to whom the Software is
11+
* furnished to do so, subject to the following conditions:
12+
*
13+
* The above copyright notice and this permission notice shall be included in
14+
* all copies or substantial portions of the Software.
15+
*
16+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
19+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22+
* THE SOFTWARE.
23+
*/
24+
25+
26+
#include "esp32-hal-gpio.h"
27+
#include "pins_arduino.h"
28+
29+
extern "C" {
30+
31+
// Initialize variant/board, called before setup()
32+
void initVariant(void)
33+
{
34+
// This board has a power control pin, and we must set it to output and high
35+
// in order to enable the NeoPixels.
36+
pinMode(NEOPIXEL_POWER, OUTPUT);
37+
digitalWrite(NEOPIXEL_POWER, HIGH);
38+
39+
// turn on the I2C power by setting LDO enable pin 'high'
40+
pinMode(PIN_I2C_POWER, OUTPUT);
41+
digitalWrite(PIN_I2C_POWER, HIGH);
42+
}
43+
}

‎variants/adafruit_qtpy_esp32s3_nopsram/bootloader.bin

22.1 KB
Binary file not shown.

‎variants/adafruit_qtpy_esp32s3_nopsram/partitions.csv

+10
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,10 @@
1+
# ESP-IDF Partition Table
2+
# Name, Type, SubType, Offset, Size, Flags
3+
# bootloader.bin,, 0x1000, 32K
4+
# partition table,, 0x8000, 4K
5+
nvs, data, nvs, 0x9000, 20K,
6+
otadata, data, ota, 0xe000, 8K,
7+
ota_0, 0, ota_0, 0x10000, 2048K,
8+
ota_1, 0, ota_1, 0x210000, 2048K,
9+
uf2, app, factory,0x410000, 256K,
10+
ffat, data, fat, 0x450000, 3776K,

‎variants/adafruit_qtpy_esp32s3_nopsram/pins_arduino.h

+56
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,56 @@
1+
#ifndef Pins_Arduino_h
2+
#define Pins_Arduino_h
3+
4+
#include <stdint.h>
5+
6+
#define USB_VID 0x239A
7+
#define USB_PID 0x8119
8+
#define USB_MANUFACTURER "Adafruit"
9+
#define USB_PRODUCT "QT Py ESP32-S3 No PSRAM"
10+
#define USB_SERIAL "" // Empty string for MAC adddress
11+
12+
#define EXTERNAL_NUM_INTERRUPTS 46
13+
#define NUM_DIGITAL_PINS 48
14+
#define NUM_ANALOG_INPUTS 20
15+
16+
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
17+
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
18+
#define digitalPinHasPWM(p) (p < 46)
19+
20+
#define PIN_NEOPIXEL 39
21+
#define NEOPIXEL_NUM 1 // number of neopixels
22+
#define NEOPIXEL_POWER 38 // power pin
23+
#define NEOPIXEL_POWER_ON HIGH // power pin state when on
24+
25+
static const uint8_t TX = 5;
26+
static const uint8_t RX = 16;
27+
#define TX1 TX
28+
#define RX1 RX
29+
30+
static const uint8_t SDA = 7;
31+
static const uint8_t SCL = 6;
32+
33+
static const uint8_t SDA1 = 41;
34+
static const uint8_t SCL1 = 40;
35+
36+
static const uint8_t SS = 42;
37+
static const uint8_t MOSI = 35;
38+
static const uint8_t SCK = 36;
39+
static const uint8_t MISO = 37;
40+
41+
static const uint8_t A0 = 18;
42+
static const uint8_t A1 = 17;
43+
static const uint8_t A2 = 9;
44+
static const uint8_t A3 = 8;
45+
static const uint8_t A4 = 7;
46+
static const uint8_t A5 = 6;
47+
static const uint8_t A6 = 5;
48+
static const uint8_t A7 = 16;
49+
50+
static const uint8_t T5 = 5;
51+
static const uint8_t T6 = 6;
52+
static const uint8_t T7 = 7;
53+
static const uint8_t T8 = 8;
54+
static const uint8_t T9 = 9;
55+
56+
#endif /* Pins_Arduino_h */

‎variants/adafruit_qtpy_esp32s3_nopsram/tinyuf2.bin

157 KB
Binary file not shown.

‎variants/adafruit_qtpy_esp32s3_nopsram/variant.cpp

+39
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,39 @@
1+
/*
2+
* The MIT License (MIT)
3+
*
4+
* Copyright (c) 2021 Ha Thach (tinyusb.org) for Adafruit Industries
5+
*
6+
* Permission is hereby granted, free of charge, to any person obtaining a copy
7+
* of this software and associated documentation files (the "Software"), to deal
8+
* in the Software without restriction, including without limitation the rights
9+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10+
* copies of the Software, and to permit persons to whom the Software is
11+
* furnished to do so, subject to the following conditions:
12+
*
13+
* The above copyright notice and this permission notice shall be included in
14+
* all copies or substantial portions of the Software.
15+
*
16+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
19+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22+
* THE SOFTWARE.
23+
*/
24+
25+
26+
#include "esp32-hal-gpio.h"
27+
#include "pins_arduino.h"
28+
29+
extern "C" {
30+
31+
// Initialize variant/board, called before setup()
32+
void initVariant(void)
33+
{
34+
// This board has a power control pin, and we must set it to output and high
35+
// in order to enable the NeoPixels.
36+
pinMode(NEOPIXEL_POWER, OUTPUT);
37+
digitalWrite(NEOPIXEL_POWER, HIGH);
38+
}
39+
}

0 commit comments

Comments
 (0)