[Impeller] Use analytical normals for stroke caps (#39124)

Author: bdero

impeller/display_list/display_list_unittests.cc

@@ -109,11 +109,13 @@ TEST_P(DisplayListTest, CanDrawArc) {
   auto callback = [&]() {
     static float start_angle = 45;
     static float sweep_angle = 270;
+    static float stroke_width = 10;
     static bool use_center = true;
 
     ImGui::Begin("Controls", nullptr, ImGuiWindowFlags_AlwaysAutoResize);
     ImGui::SliderFloat("Start angle", &start_angle, -360, 360);
     ImGui::SliderFloat("Sweep angle", &sweep_angle, -360, 360);
+    ImGui::SliderFloat("Stroke width", &stroke_width, 0, 100);
     ImGui::Checkbox("Use center", &use_center);
     ImGui::End();
 
@@ -125,15 +127,15 @@ TEST_P(DisplayListTest, CanDrawArc) {
     Vector2 scale = GetContentScale();
     builder.scale(scale.x, scale.y);
     builder.setStyle(flutter::DlDrawStyle::kStroke);
-    builder.setStrokeCap(flutter::DlStrokeCap::kRound);
+    builder.setStrokeCap(flutter::DlStrokeCap::kButt);
     builder.setStrokeJoin(flutter::DlStrokeJoin::kMiter);
     builder.setStrokeMiter(10);
     auto rect = SkRect::MakeLTRB(p1.x, p1.y, p2.x, p2.y);
     builder.setColor(SK_ColorGREEN);
     builder.setStrokeWidth(2);
     builder.drawRect(rect);
     builder.setColor(SK_ColorRED);
-    builder.setStrokeWidth(10);
+    builder.setStrokeWidth(stroke_width);
     builder.drawArc(rect, start_angle, sweep_angle, use_center);
 
     return builder.Build();

impeller/entity/geometry.cc

@@ -239,7 +239,13 @@ StrokePathGeometry::CapProc StrokePathGeometry::GetCapProc(Cap stroke_cap) {
     case Cap::kButt:
       cap_proc = [](VertexBufferBuilder<VS::PerVertexData>& vtx_builder,
                     const Point& position, const Point& offset,
-                    Scalar tolerance) {};
+                    Scalar tolerance) {
+        VS::PerVertexData vtx;
+        vtx.position = position + offset;
+        vtx_builder.AppendVertex(vtx);
+        vtx.position = position - offset;
+        vtx_builder.AppendVertex(vtx);
+      };
       break;
     case Cap::kRound:
       cap_proc = [](VertexBufferBuilder<VS::PerVertexData>& vtx_builder,
@@ -273,7 +279,6 @@ StrokePathGeometry::CapProc StrokePathGeometry::GetCapProc(Cap stroke_cap) {
                     const Point& position, const Point& offset,
                     Scalar tolerance) {
         VS::PerVertexData vtx;
-        vtx.position = position;
 
         Point forward(offset.y, -offset.x);
 
@@ -319,6 +324,7 @@ VertexBuffer StrokePathGeometry::CreateSolidStrokeVertices(
 
   for (size_t contour_i = 0; contour_i < polyline.contours.size();
        contour_i++) {
+    auto contour = polyline.contours[contour_i];
     size_t contour_start_point_i, contour_end_point_i;
     std::tie(contour_start_point_i, contour_end_point_i) =
         polyline.GetContourPointBounds(contour_i);
@@ -364,7 +370,10 @@ VertexBuffer StrokePathGeometry::CreateSolidStrokeVertices(
 
     // Generate start cap.
     if (!polyline.contours[contour_i].is_closed) {
-      cap_proc(vtx_builder, polyline.points[contour_start_point_i], -offset,
+      auto cap_offset =
+          Vector2(contour.start_direction.y, -contour.start_direction.x) *
+          stroke_width * 0.5;
+      cap_proc(vtx_builder, polyline.points[contour_start_point_i], cap_offset,
                tolerance);
     }
 
@@ -394,8 +403,11 @@ VertexBuffer StrokePathGeometry::CreateSolidStrokeVertices(
 
     // Generate end cap or join.
     if (!polyline.contours[contour_i].is_closed) {
-      cap_proc(vtx_builder, polyline.points[contour_end_point_i - 1], offset,
-               tolerance);
+      auto cap_offset =
+          Vector2(-contour.end_direction.y, contour.end_direction.x) *
+          stroke_width * 0.5;
+      cap_proc(vtx_builder, polyline.points[contour_end_point_i - 1],
+               cap_offset, tolerance);
     } else {
       join_proc(vtx_builder, polyline.points[contour_start_point_i], offset,
                 contour_first_offset, scaled_miter_limit, tolerance);

impeller/geometry/path.cc

@@ -242,32 +242,81 @@ Path::Polyline Path::CreatePolyline(Scalar tolerance) const {
     }
   };
 
+  auto get_path_component =
+      [this](size_t component_i) -> std::optional<const PathComponent*> {
+    if (component_i >= components_.size()) {
+      return std::nullopt;
+    }
+    const auto& component = components_[component_i];
+    switch (component.type) {
+      case ComponentType::kLinear:
+        return &linears_[component.index];
+      case ComponentType::kQuadratic:
+        return &quads_[component.index];
+      case ComponentType::kCubic:
+        return &cubics_[component.index];
+      case ComponentType::kContour:
+        return std::nullopt;
+    }
+  };
+
+  std::optional<const PathComponent*> previous_path_component;
+  auto end_contour = [&polyline, &previous_path_component]() {
+    // Whenever a contour has ended, extract the exact end direction from the
+    // last component.
+    if (polyline.contours.empty()) {
+      return;
+    }
+    if (!previous_path_component.has_value()) {
+      return;
+    }
+    auto& contour = polyline.contours.back();
+    contour.end_direction =
+        previous_path_component.value()->GetEndDirection().value_or(
+            Vector2(0, 1));
+  };
+
   for (size_t component_i = 0; component_i < components_.size();
        component_i++) {
     const auto& component = components_[component_i];
     switch (component.type) {
       case ComponentType::kLinear:
         collect_points(linears_[component.index].CreatePolyline());
+        previous_path_component = &linears_[component.index];
         break;
       case ComponentType::kQuadratic:
         collect_points(quads_[component.index].CreatePolyline(tolerance));
+        previous_path_component = &quads_[component.index];
         break;
       case ComponentType::kCubic:
         collect_points(cubics_[component.index].CreatePolyline(tolerance));
+        previous_path_component = &cubics_[component.index];
         break;
       case ComponentType::kContour:
         if (component_i == components_.size() - 1) {
           // If the last component is a contour, that means it's an empty
           // contour, so skip it.
           continue;
         }
+        end_contour();
+
+        Vector2 start_direction(0, -1);
+        auto first_component = get_path_component(component_i + 1);
+        if (first_component.has_value()) {
+          start_direction =
+              first_component.value()->GetStartDirection().value_or(
+                  Vector2(0, -1));
+        }
+
         const auto& contour = contours_[component.index];
         polyline.contours.push_back({.start_index = polyline.points.size(),
-                                     .is_closed = contour.is_closed});
+                                     .is_closed = contour.is_closed,
+                                     .start_direction = start_direction});
         previous_contour_point = std::nullopt;
         collect_points({contour.destination});
         break;
     }
+    end_contour();
   }
   return polyline;
 }

impeller/geometry/path.h

@@ -49,6 +49,11 @@ class Path {
     /// Denotes whether the last point of this contour is connected to the first
     /// point of this contour or not.
     bool is_closed;
+
+    /// The direction of the contour's start cap.
+    Vector2 start_direction;
+    /// The direction of the contour's end cap.
+    Vector2 end_direction;
   };
 
   /// One or more contours represented as a series of points and indices in

impeller/geometry/path_component.cc

@@ -8,6 +8,8 @@
 
 namespace impeller {
 
+PathComponent::~PathComponent() = default;
+
 /*
  *  Based on: https://en.wikipedia.org/wiki/B%C3%A9zier_curve#Specific_cases
  */
@@ -67,6 +69,14 @@ std::vector<Point> LinearPathComponent::Extrema() const {
   return {p1, p2};
 }
 
+std::optional<Vector2> LinearPathComponent::GetStartDirection() const {
+  return (p1 - p2).Normalize();
+}
+
+std::optional<Vector2> LinearPathComponent::GetEndDirection() const {
+  return (p2 - p1).Normalize();
+}
+
 Point QuadraticPathComponent::Solve(Scalar time) const {
   return {
       QuadraticSolve(time, p1.x, cp.x, p2.x),  // x
@@ -139,6 +149,14 @@ std::vector<Point> QuadraticPathComponent::Extrema() const {
   return elevated.Extrema();
 }
 
+std::optional<Vector2> QuadraticPathComponent::GetStartDirection() const {
+  return (p1 - cp).Normalize();
+}
+
+std::optional<Vector2> QuadraticPathComponent::GetEndDirection() const {
+  return (p2 - cp).Normalize();
+}
+
 Point CubicPathComponent::Solve(Scalar time) const {
   return {
       CubicSolve(time, p1.x, cp1.x, cp2.x, p2.x),  // x
@@ -283,4 +301,12 @@ std::vector<Point> CubicPathComponent::Extrema() const {
   return points;
 }
 
+std::optional<Vector2> CubicPathComponent::GetStartDirection() const {
+  return (p1 - cp1).Normalize();
+}
+
+std::optional<Vector2> CubicPathComponent::GetEndDirection() const {
+  return (p2 - cp2).Normalize();
+}
+
 }  // namespace impeller

impeller/geometry/path_component.h

@@ -22,7 +22,14 @@ namespace impeller {
 // points for the given scale.
 static constexpr Scalar kDefaultCurveTolerance = .1f;
 
-struct LinearPathComponent {
+struct PathComponent {
+  virtual ~PathComponent();
+
+  virtual std::optional<Vector2> GetStartDirection() const = 0;
+  virtual std::optional<Vector2> GetEndDirection() const = 0;
+};
+
+struct LinearPathComponent : public PathComponent {
   Point p1;
   Point p2;
 
@@ -39,9 +46,13 @@ struct LinearPathComponent {
   bool operator==(const LinearPathComponent& other) const {
     return p1 == other.p1 && p2 == other.p2;
   }
+
+  std::optional<Vector2> GetStartDirection() const override;
+
+  std::optional<Vector2> GetEndDirection() const override;
 };
 
-struct QuadraticPathComponent {
+struct QuadraticPathComponent : public PathComponent {
   Point p1;
   Point cp;
   Point p2;
@@ -76,9 +87,13 @@ struct QuadraticPathComponent {
   bool operator==(const QuadraticPathComponent& other) const {
     return p1 == other.p1 && cp == other.cp && p2 == other.p2;
   }
+
+  std::optional<Vector2> GetStartDirection() const override;
+
+  std::optional<Vector2> GetEndDirection() const override;
 };
 
-struct CubicPathComponent {
+struct CubicPathComponent : public PathComponent {
   Point p1;
   Point cp1;
   Point cp2;
@@ -118,6 +133,10 @@ struct CubicPathComponent {
            p2 == other.p2;
   }
 
+  std::optional<Vector2> GetStartDirection() const override;
+
+  std::optional<Vector2> GetEndDirection() const override;
+
  private:
   QuadraticPathComponent Lower() const;
 };