Incorporated QE feedback.

Signed-off-by: John Wilkins <[email protected]>

Author: johnwilkins

modules/bmo-about-the-baremetalhost-resource.adoc

@@ -94,7 +94,7 @@ a|  (Optional) Contains the information about the RAID configuration for bare me
 
 [NOTE]
 ====
-{product-title} {product-version} supports hardware RAID for BMCs using the iRMC protocol with support for RAID levels 0, 1, 5, 6, and 10, and the Redfish API with the iDRAC protocol with firmware version 6.10.30.20 or later and RAID levels 0, 1, and 5. {product-title} {product-version} does not support software RAID.
+{product-title} {product-version} supports hardware RAID for BMCs using iRMC with support for RAID levels 0, 1, 5, 6, and 10, and iDRAC using the Redfish API with firmware version 6.10.30.20 or later and RAID levels 0, 1, and 5. {product-title} {product-version} does not support software RAID.
 ====
 
 See the following configuration settings:

modules/ipi-install-configuring-the-raid.adoc

@@ -16,9 +16,9 @@ If you want to configure a hardware RAID for the node, verify that the node has
 .Hardware RAID support by vendor
 [options="header"]
 |====
-|Vendor protocol |Firmware version|RAID levels
-|Fujitsu iRMC |N/A|0, 1, 5, 6, and 10
-|Dell Redfish API with iDRAC | Version 6.10.30.20 or later | 0, 1, and 5
+|Vendor | BMC and protocol |Firmware version|RAID levels
+|Fujitsu | iRMC |N/A|0, 1, 5, 6, and 10
+|Dell | iDRAC with Redfish  | Version 6.10.30.20 or later | 0, 1, and 5
 |====
 
 .Procedure