We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
There was an error while loading. Please reload this page.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Operating system: Windows 7 Ultimate 64bit Service Pack 1
PlatformIO Version (platformio --version): 3.5.0rc10
platformio --version
Visual Studio Code Version: 1.18.0
Atom Version: 1.23.1 x64
Partition sizes doesn't change even if default.csv is changed.
Following this issue I tried to change the partition sizes on my ESP32 Dev Module. The changed default.csv:
Name, Type, SubType, Offset, Size, Flags nvs, data, nvs, 0x9000, 0x5000, otadata, data, ota, 0xe000, 0x2000, app0, app, ota_0, 0x10000, 0x150000, app1, app, ota_1, 0x160000,0x150000, eeprom, data, 0x99, 0x310000,0x1000, spiffs, data, spiffs, 0x311000,640K,
nvs, data, nvs, 0x9000, 0x5000, otadata, data, ota, 0xe000, 0x2000, app0, app, ota_0, 0x10000, 0x150000, app1, app, ota_1, 0x160000,0x150000, eeprom, data, 0x99, 0x310000,0x1000, spiffs, data, spiffs, 0x311000,640K,
But after uploading the partition sizes are still the default ones:
App partition table: SubType 10 Address 0x010000 Size 0x140000 Encryption 0 Label app0 SubType 11 Address 0x150000 Size 0x140000 Encryption 0 Label app1 Data partition table: SubType 02 Address 0x009000 Size 0x005000 Encryption 0 Label nvs SubType 00 Address 0x00e000 Size 0x002000 Encryption 0 Label otadata SubType 99 Address 0x290000 Size 0x001000 Encryption 0 Label eeprom SubType 82 Address 0x291000 Size 0x16f000 Encryption 0 Label spiffs
Then I tried the exact same procedure on Arduino IDE and the partition size changed to:
App partition table: Type: 00 SubType 10 Address 0x010000 Size 0x150000 Encryption 0 Label app0 Type: 00 SubType 11 Address 0x160000 Size 0x150000 Encryption 0 Label app1 Data partition table: Type: 01 SubType 02 Address 0x009000 Size 0x005000 Encryption 0 Label nvs ype: 01 SubType 00 Address 0x00E000 Size 0x002000 Encryption 0 Label otadata Type: 01 SubType 99 Address 0x310000 Size 0x001000 Encryption 0 Label eeprom Type: 01 SubType 82 Address 0x311000 Size 0x0A0000 Encryption 0 Label spiffs
Going back to PlatformIO, I uploaded my code again from there and the changed partition sizes are still valid.
It seems that PlatformIO doesn't change the partition size at all. Or is my method to change the partition sizes wrong?
The text was updated successfully, but these errors were encountered:
Please move issue to appropriate repository https://github.com/platformio/platform-espressif32/issues
Sorry, something went wrong.
No branches or pull requests
Configuration
Operating system: Windows 7 Ultimate 64bit Service Pack 1
PlatformIO Version (
platformio --version
): 3.5.0rc10Visual Studio Code Version: 1.18.0
Atom Version: 1.23.1 x64
Description of problem
Partition sizes doesn't change even if default.csv is changed.
Steps to Reproduce
Following this issue I tried to change the partition sizes on my ESP32 Dev Module.
The changed default.csv:
But after uploading the partition sizes are still the default ones:
Then I tried the exact same procedure on Arduino IDE and the partition size changed to:
Going back to PlatformIO, I uploaded my code again from there and the changed partition sizes are still valid.
It seems that PlatformIO doesn't change the partition size at all. Or is my method to change the partition sizes wrong?
The text was updated successfully, but these errors were encountered: