Skip to content

Commit a09cd35

Browse files
alexaringanholt
alexaring
authored and
anholt
committed
ARM: bcm2835: add rpi power domain driver
This patch adds support for several power domains on Raspberry Pi, including USB (so it can be enabled even if the bootloader didn't do it), and graphics. This patch is the combined work of Eric Anholt (who wrote USB support inside of the Raspberry Pi firmware driver, and wrote the non-USB domain support) and Alexander Aring (who separated the original USB work out from the firmware driver). Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: Eric Anholt <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Reviewed-by: Kevin Hilman <[email protected]>
1 parent 4c8b338 commit a09cd35

File tree

6 files changed

+300
-0
lines changed

6 files changed

+300
-0
lines changed

‎drivers/soc/Kconfig

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -1,5 +1,6 @@
11
menu "SOC (System On Chip) specific Drivers"
22

3+
source "drivers/soc/bcm/Kconfig"
34
source "drivers/soc/brcmstb/Kconfig"
45
source "drivers/soc/mediatek/Kconfig"
56
source "drivers/soc/qcom/Kconfig"

‎drivers/soc/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -2,6 +2,7 @@
22
# Makefile for the Linux Kernel SOC specific device drivers.
33
#
44

5+
obj-y += bcm/
56
obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
67
obj-$(CONFIG_MACH_DOVE) += dove/
78
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/

‎drivers/soc/bcm/Kconfig

Lines changed: 9 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,9 @@
1+
config RASPBERRYPI_POWER
2+
bool "Raspberry Pi power domain driver"
3+
depends on ARCH_BCM2835 || COMPILE_TEST
4+
depends on RASPBERRYPI_FIRMWARE
5+
select PM_GENERIC_DOMAINS if PM
6+
select PM_GENERIC_DOMAINS_OF if PM
7+
help
8+
This enables support for the RPi power domains which can be enabled
9+
or disabled via the RPi firmware.

‎drivers/soc/bcm/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1 @@
1+
obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o

‎drivers/soc/bcm/raspberrypi-power.c

Lines changed: 247 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,247 @@
1+
/* (C) 2015 Pengutronix, Alexander Aring <[email protected]>
2+
*
3+
* This program is free software; you can redistribute it and/or modify
4+
* it under the terms of the GNU General Public License version 2 as
5+
* published by the Free Software Foundation.
6+
*
7+
* Authors:
8+
* Alexander Aring <[email protected]>
9+
* Eric Anholt <[email protected]>
10+
*/
11+
12+
#include <linux/module.h>
13+
#include <linux/of_platform.h>
14+
#include <linux/platform_device.h>
15+
#include <linux/pm_domain.h>
16+
#include <dt-bindings/power/raspberrypi-power.h>
17+
#include <soc/bcm2835/raspberrypi-firmware.h>
18+
19+
/*
20+
* Firmware indices for the old power domains interface. Only a few
21+
* of them were actually implemented.
22+
*/
23+
#define RPI_OLD_POWER_DOMAIN_USB 3
24+
#define RPI_OLD_POWER_DOMAIN_V3D 10
25+
26+
struct rpi_power_domain {
27+
u32 domain;
28+
bool enabled;
29+
bool old_interface;
30+
struct generic_pm_domain base;
31+
struct rpi_firmware *fw;
32+
};
33+
34+
struct rpi_power_domains {
35+
bool has_new_interface;
36+
struct genpd_onecell_data xlate;
37+
struct rpi_firmware *fw;
38+
struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT];
39+
};
40+
41+
/*
42+
* Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and
43+
* RPI_FIRMWARE_SET_DOMAIN_STATE
44+
*/
45+
struct rpi_power_domain_packet {
46+
u32 domain;
47+
u32 on;
48+
} __packet;
49+
50+
/*
51+
* Asks the firmware to enable or disable power on a specific power
52+
* domain.
53+
*/
54+
static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on)
55+
{
56+
struct rpi_power_domain_packet packet;
57+
58+
packet.domain = rpi_domain->domain;
59+
packet.on = on;
60+
return rpi_firmware_property(rpi_domain->fw,
61+
rpi_domain->old_interface ?
62+
RPI_FIRMWARE_SET_POWER_STATE :
63+
RPI_FIRMWARE_SET_DOMAIN_STATE,
64+
&packet, sizeof(packet));
65+
}
66+
67+
static int rpi_domain_off(struct generic_pm_domain *domain)
68+
{
69+
struct rpi_power_domain *rpi_domain =
70+
container_of(domain, struct rpi_power_domain, base);
71+
72+
return rpi_firmware_set_power(rpi_domain, false);
73+
}
74+
75+
static int rpi_domain_on(struct generic_pm_domain *domain)
76+
{
77+
struct rpi_power_domain *rpi_domain =
78+
container_of(domain, struct rpi_power_domain, base);
79+
80+
return rpi_firmware_set_power(rpi_domain, true);
81+
}
82+
83+
static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
84+
int xlate_index, const char *name)
85+
{
86+
struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
87+
88+
dom->fw = rpi_domains->fw;
89+
90+
dom->base.name = name;
91+
dom->base.power_on = rpi_domain_on;
92+
dom->base.power_off = rpi_domain_off;
93+
94+
/*
95+
* Treat all power domains as off at boot.
96+
*
97+
* The firmware itself may be keeping some domains on, but
98+
* from Linux's perspective all we control is the refcounts
99+
* that we give to the firmware, and we can't ask the firmware
100+
* to turn off something that we haven't ourselves turned on.
101+
*/
102+
pm_genpd_init(&dom->base, NULL, true);
103+
104+
rpi_domains->xlate.domains[xlate_index] = &dom->base;
105+
}
106+
107+
static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains,
108+
int xlate_index, const char *name)
109+
{
110+
struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
111+
112+
if (!rpi_domains->has_new_interface)
113+
return;
114+
115+
/* The DT binding index is the firmware's domain index minus one. */
116+
dom->domain = xlate_index + 1;
117+
118+
rpi_common_init_power_domain(rpi_domains, xlate_index, name);
119+
}
120+
121+
static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains,
122+
int xlate_index, int domain,
123+
const char *name)
124+
{
125+
struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
126+
127+
dom->old_interface = true;
128+
dom->domain = domain;
129+
130+
rpi_common_init_power_domain(rpi_domains, xlate_index, name);
131+
}
132+
133+
/*
134+
* Detects whether the firmware supports the new power domains interface.
135+
*
136+
* The firmware doesn't actually return an error on an unknown tag,
137+
* and just skips over it, so we do the detection by putting an
138+
* unexpected value in the return field and checking if it was
139+
* unchanged.
140+
*/
141+
static bool
142+
rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains)
143+
{
144+
struct rpi_power_domain_packet packet;
145+
int ret;
146+
147+
packet.domain = RPI_POWER_DOMAIN_ARM;
148+
packet.on = ~0;
149+
150+
ret = rpi_firmware_property(rpi_domains->fw,
151+
RPI_FIRMWARE_GET_DOMAIN_STATE,
152+
&packet, sizeof(packet));
153+
154+
return ret == 0 && packet.on != ~0;
155+
}
156+
157+
static int rpi_power_probe(struct platform_device *pdev)
158+
{
159+
struct device_node *fw_np;
160+
struct device *dev = &pdev->dev;
161+
struct rpi_power_domains *rpi_domains;
162+
163+
rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL);
164+
if (!rpi_domains)
165+
return -ENOMEM;
166+
167+
rpi_domains->xlate.domains =
168+
devm_kzalloc(dev, sizeof(*rpi_domains->xlate.domains) *
169+
RPI_POWER_DOMAIN_COUNT, GFP_KERNEL);
170+
if (!rpi_domains->xlate.domains)
171+
return -ENOMEM;
172+
173+
rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT;
174+
175+
fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
176+
if (!fw_np) {
177+
dev_err(&pdev->dev, "no firmware node\n");
178+
return -ENODEV;
179+
}
180+
181+
rpi_domains->fw = rpi_firmware_get(fw_np);
182+
of_node_put(fw_np);
183+
if (!rpi_domains->fw)
184+
return -EPROBE_DEFER;
185+
186+
rpi_domains->has_new_interface =
187+
rpi_has_new_domain_support(rpi_domains);
188+
189+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0");
190+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1");
191+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2");
192+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER,
193+
"VIDEO_SCALER");
194+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1");
195+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI");
196+
197+
/*
198+
* Use the old firmware interface for USB power, so that we
199+
* can turn it on even if the firmware hasn't been updated.
200+
*/
201+
rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB,
202+
RPI_OLD_POWER_DOMAIN_USB, "USB");
203+
204+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC");
205+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG");
206+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264");
207+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D");
208+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP");
209+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0");
210+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1");
211+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX");
212+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2");
213+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI");
214+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0");
215+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1");
216+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER,
217+
"TRANSPOSER");
218+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX");
219+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP");
220+
rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM");
221+
222+
of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate);
223+
224+
platform_set_drvdata(pdev, rpi_domains);
225+
226+
return 0;
227+
}
228+
229+
static const struct of_device_id rpi_power_of_match[] = {
230+
{ .compatible = "raspberrypi,bcm2835-power", },
231+
{},
232+
};
233+
MODULE_DEVICE_TABLE(of, rpi_power_of_match);
234+
235+
static struct platform_driver rpi_power_driver = {
236+
.driver = {
237+
.name = "raspberrypi-power",
238+
.of_match_table = rpi_power_of_match,
239+
},
240+
.probe = rpi_power_probe,
241+
};
242+
builtin_platform_driver(rpi_power_driver);
243+
244+
MODULE_AUTHOR("Alexander Aring <[email protected]>");
245+
MODULE_AUTHOR("Eric Anholt <[email protected]>");
246+
MODULE_DESCRIPTION("Raspberry Pi power domain driver");
247+
MODULE_LICENSE("GPL v2");

‎include/dt-bindings/power/raspberrypi-power.h

Lines changed: 41 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,41 @@
1+
/*
2+
* Copyright © 2015 Broadcom
3+
*
4+
* This program is free software; you can redistribute it and/or modify
5+
* it under the terms of the GNU General Public License version 2 as
6+
* published by the Free Software Foundation.
7+
*/
8+
9+
#ifndef _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H
10+
#define _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H
11+
12+
/* These power domain indices are the firmware interface's indices
13+
* minus one.
14+
*/
15+
#define RPI_POWER_DOMAIN_I2C0 0
16+
#define RPI_POWER_DOMAIN_I2C1 1
17+
#define RPI_POWER_DOMAIN_I2C2 2
18+
#define RPI_POWER_DOMAIN_VIDEO_SCALER 3
19+
#define RPI_POWER_DOMAIN_VPU1 4
20+
#define RPI_POWER_DOMAIN_HDMI 5
21+
#define RPI_POWER_DOMAIN_USB 6
22+
#define RPI_POWER_DOMAIN_VEC 7
23+
#define RPI_POWER_DOMAIN_JPEG 8
24+
#define RPI_POWER_DOMAIN_H264 9
25+
#define RPI_POWER_DOMAIN_V3D 10
26+
#define RPI_POWER_DOMAIN_ISP 11
27+
#define RPI_POWER_DOMAIN_UNICAM0 12
28+
#define RPI_POWER_DOMAIN_UNICAM1 13
29+
#define RPI_POWER_DOMAIN_CCP2RX 14
30+
#define RPI_POWER_DOMAIN_CSI2 15
31+
#define RPI_POWER_DOMAIN_CPI 16
32+
#define RPI_POWER_DOMAIN_DSI0 17
33+
#define RPI_POWER_DOMAIN_DSI1 18
34+
#define RPI_POWER_DOMAIN_TRANSPOSER 19
35+
#define RPI_POWER_DOMAIN_CCP2TX 20
36+
#define RPI_POWER_DOMAIN_CDP 21
37+
#define RPI_POWER_DOMAIN_ARM 22
38+
39+
#define RPI_POWER_DOMAIN_COUNT 23
40+
41+
#endif /* _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H */

0 commit comments

Comments
 (0)