[bsp/phytium]默认配置修改

bsp/phytium/aarch32/.config

@@ -8,7 +8,7 @@ CONFIG_RT_NAME_MAX=16
 # CONFIG_RT_USING_NANO is not set
 # CONFIG_RT_USING_AMP is not set
 CONFIG_RT_USING_SMP=y
-CONFIG_RT_CPUS_NR=4
+CONFIG_RT_CPUS_NR=2
 CONFIG_RT_ALIGN_SIZE=4
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
 CONFIG_RT_THREAD_PRIORITY_32=y
@@ -93,7 +93,7 @@ CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
 CONFIG_RT_VER_NUM=0x50200
-CONFIG_RT_USING_STDC_ATOMIC=y
+# CONFIG_RT_USING_STDC_ATOMIC is not set
 CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32
 # end of RT-Thread Kernel
 
@@ -253,8 +253,9 @@ CONFIG_RT_CHERRYUSB_HOST=y
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_BL is not set
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_HPM is not set
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_AIC is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUVOTON_NUC980 is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUVOTON_MA35D0 is not set
+# CONFIG_RT_CHERRYUSB_HOST_EHCI_MCX is not set
+# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUC980 is not set
+# CONFIG_RT_CHERRYUSB_HOST_EHCI_MA35D0 is not set
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_CUSTOM is not set
 # CONFIG_RT_CHERRYUSB_HOST_DWC2_ST is not set
 # CONFIG_RT_CHERRYUSB_HOST_DWC2_ESP is not set
@@ -263,8 +264,8 @@ CONFIG_RT_CHERRYUSB_HOST=y
 # CONFIG_RT_CHERRYUSB_HOST_MUSB_SUNXI is not set
 # CONFIG_RT_CHERRYUSB_HOST_MUSB_BK is not set
 # CONFIG_RT_CHERRYUSB_HOST_MUSB_CUSTOM is not set
-CONFIG_RT_CHERRYUSB_HOST_PUSB2=y
-# CONFIG_RT_CHERRYUSB_HOST_XHCI is not set
+# CONFIG_RT_CHERRYUSB_HOST_PUSB2 is not set
+CONFIG_RT_CHERRYUSB_HOST_XHCI=y
 # CONFIG_RT_CHERRYUSB_HOST_CDC_ACM is not set
 CONFIG_RT_CHERRYUSB_HOST_HID=y
 CONFIG_RT_CHERRYUSB_HOST_MSC=y
@@ -280,7 +281,8 @@ CONFIG_RT_CHERRYUSB_HOST_MSC=y
 # CONFIG_RT_CHERRYUSB_HOST_CH34X is not set
 # CONFIG_RT_CHERRYUSB_HOST_CP210X is not set
 # CONFIG_RT_CHERRYUSB_HOST_PL2303 is not set
-# CONFIG_CHERRYUSB_HOST_TEMPLATE is not set
+CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
+# CONFIG_RT_CHERRYUSB_HOST_TEMPLATE is not set
 # end of Device Drivers
 
 #
@@ -622,7 +624,6 @@ CONFIG_RT_USING_ADT_REF=y
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PARSON is not set
-# CONFIG_PKG_USING_RYAN_JSON is not set
 # end of JSON: JavaScript Object Notation, a lightweight data-interchange format
 
 #
@@ -742,8 +743,6 @@ CONFIG_RT_USING_ADT_REF=y
 # CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
 # end of enhanced kernel services
 
-# CONFIG_PKG_USING_AUNITY is not set
-
 #
 # acceleration: Assembly language or algorithmic acceleration packages
 #
@@ -834,29 +833,12 @@ CONFIG_RT_USING_ADT_REF=y
 #
 # STM32 HAL & SDK Drivers
 #
-# CONFIG_PKG_USING_STM32F4_HAL_DRIVER is not set
-# CONFIG_PKG_USING_STM32F4_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
 # CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_STM32WB55_SDK is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # end of STM32 HAL & SDK Drivers
 
-#
-# Infineon HAL Packages
-#
-# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set
-# CONFIG_PKG_USING_INFINEON_CMSIS is not set
-# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set
-# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set
-# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set
-# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set
-# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set
-# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set
-# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set
-# CONFIG_PKG_USING_INFINEON_USBDEV is not set
-# end of Infineon HAL Packages
-
 # CONFIG_PKG_USING_BLUETRUM_SDK is not set
 # CONFIG_PKG_USING_EMBARC_BSP is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -1029,7 +1011,6 @@ CONFIG_RT_USING_ADT_REF=y
 # CONFIG_PKG_USING_SYSTEM_RUN_LED is not set
 # CONFIG_PKG_USING_BT_MX01 is not set
 # CONFIG_PKG_USING_RGPOWER is not set
-# CONFIG_PKG_USING_BT_MX02 is not set
 # CONFIG_PKG_USING_SPI_TOOLS is not set
 # end of peripheral libraries and drivers
 
@@ -1051,7 +1032,6 @@ CONFIG_RT_USING_ADT_REF=y
 #
 # Signal Processing and Control Algorithm Packages
 #
-# CONFIG_PKG_USING_APID is not set
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 # CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
@@ -1379,22 +1359,25 @@ CONFIG_RT_USING_UART1=y
 # CONFIG_RT_USING_UART2 is not set
 # CONFIG_RT_USING_UART3 is not set
 CONFIG_BSP_USING_SPI=y
-CONFIG_RT_USING_SPIM0=y
+# CONFIG_RT_USING_SPIM0 is not set
 # CONFIG_RT_USING_SPIM1 is not set
-# CONFIG_RT_USING_SPIM2 is not set
+CONFIG_RT_USING_SPIM2=y
 # CONFIG_RT_USING_SPIM3 is not set
-# CONFIG_BSP_USING_CAN is not set
+CONFIG_BSP_USING_CAN=y
+CONFIG_RT_USING_CANFD=y
+# CONFIG_RT_USING_FILTER is not set
+CONFIG_RT_USING_CAN0=y
+CONFIG_RT_USING_CAN1=y
 CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_QSPI=y
 CONFIG_RT_USING_QSPI0=y
 CONFIG_USING_QSPI_CHANNEL0=y
 # CONFIG_USING_QSPI_CHANNEL1 is not set
 CONFIG_BSP_USING_ETH=y
-CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
 CONFIG_BSP_USING_PWM=y
 # CONFIG_RT_USING_PWM0 is not set
 # CONFIG_RT_USING_PWM1 is not set
-# CONFIG_RT_USING_PWM2 is not set
+CONFIG_RT_USING_PWM2=y
 # CONFIG_RT_USING_PWM3 is not set
 # CONFIG_RT_USING_PWM4 is not set
 # CONFIG_RT_USING_PWM5 is not set
@@ -1420,9 +1403,13 @@ CONFIG_RT_USING_MIO1=y
 # CONFIG_RT_USING_MIO15 is not set
 # CONFIG_I2C_USE_CONTROLLER is not set
 CONFIG_BSP_USING_SDIF=y
-# CONFIG_BSP_USING_SDCARD_FATFS is not set
-# CONFIG_USING_SDIF0 is not set
-# CONFIG_USING_SDIF1 is not set
+CONFIG_BSP_USING_SDCARD_FATFS=y
+CONFIG_USING_SDIF0=y
+# CONFIG_USE_SDIF0_TF is not set
+CONFIG_USE_SDIF0_EMMC=y
+CONFIG_USING_SDIF1=y
+CONFIG_USE_SDIF1_TF=y
+# CONFIG_USE_SDIF1_EMMC is not set
 CONFIG_BSP_USING_DC=y
 CONFIG_RT_USING_DC_CHANNEL0=y
 CONFIG_RT_USING_DC_CHANNEL1=y
@@ -1444,15 +1431,16 @@ CONFIG_USE_AARCH64_L1_TO_AARCH32=y
 #
 # Soc configuration
 #
-CONFIG_TARGET_PHYTIUMPI=y
+# CONFIG_TARGET_PHYTIUMPI is not set
 # CONFIG_TARGET_E2000Q is not set
-# CONFIG_TARGET_E2000D is not set
+CONFIG_TARGET_E2000D=y
 # CONFIG_TARGET_E2000S is not set
 # CONFIG_TARGET_FT2004 is not set
 # CONFIG_TARGET_D2000 is not set
 # CONFIG_TARGET_PD2308 is not set
-CONFIG_SOC_NAME="phytiumpi"
-CONFIG_SOC_CORE_NUM=4
+CONFIG_SOC_NAME="e2000"
+CONFIG_TARGET_TYPE_NAME="d"
+CONFIG_SOC_CORE_NUM=2
 CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
 CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
 CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
@@ -1466,21 +1454,22 @@ CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
 #
 # Board Configuration
 #
-CONFIG_BOARD_NAME="firefly"
+CONFIG_E2000D_DEMO_BOARD=y
+CONFIG_BOARD_NAME="demo"
+
+#
+# IO mux configuration when board start up
+#
 # CONFIG_USE_SPI_IOPAD is not set
 # CONFIG_USE_GPIO_IOPAD is not set
 # CONFIG_USE_CAN_IOPAD is not set
 # CONFIG_USE_QSPI_IOPAD is not set
 # CONFIG_USE_PWM_IOPAD is not set
+# CONFIG_USE_ADC_IOPAD is not set
 # CONFIG_USE_MIO_IOPAD is not set
 # CONFIG_USE_TACHO_IOPAD is not set
 # CONFIG_USE_UART_IOPAD is not set
 # CONFIG_USE_THIRD_PARTY_IOPAD is not set
-CONFIG_FIREFLY_DEMO_BOARD=y
-
-#
-# IO mux configuration when board start up
-#
 # end of IO mux configuration when board start up
 
 # CONFIG_CUS_DEMO_BOARD is not set

bsp/phytium/aarch32/configs/e2000d_demo_rtsmart

@@ -256,6 +256,7 @@ CONFIG_RT_USING_PIN=y
 CONFIG_RT_USING_KTIME=y
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CHERRYUSB is not set
+CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
 # end of Device Drivers
 
 #
@@ -337,6 +338,7 @@ CONFIG_NETDEV_USING_IFCONFIG=y
 CONFIG_NETDEV_USING_PING=y
 CONFIG_NETDEV_USING_NETSTAT=y
 CONFIG_NETDEV_USING_AUTO_DEFAULT=y
+# CONFIG_NETDEV_USING_LINK_STATUS_CALLBACK is not set
 # CONFIG_NETDEV_USING_IPV6 is not set
 CONFIG_NETDEV_IPV4=1
 CONFIG_NETDEV_IPV6=0
@@ -1369,7 +1371,6 @@ CONFIG_RT_USING_QSPI0=y
 CONFIG_USING_QSPI_CHANNEL0=y
 # CONFIG_USING_QSPI_CHANNEL1 is not set
 CONFIG_BSP_USING_ETH=y
-CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
 CONFIG_BSP_USING_PWM=y
 # CONFIG_RT_USING_PWM0 is not set
 # CONFIG_RT_USING_PWM1 is not set
@@ -1409,8 +1410,6 @@ CONFIG_USE_SDIF1_TF=y
 CONFIG_BSP_USING_DC=y
 CONFIG_RT_USING_DC_CHANNEL0=y
 # CONFIG_RT_USING_DC_CHANNEL1 is not set
-# CONFIG_BSP_USING_XHCI is not set
-# CONFIG_BSP_USING_PUSB2 is not set
 # end of On-chip Peripheral Drivers
 
 #

bsp/phytium/aarch32/configs/e2000d_demo_rtsmart.h

@@ -168,6 +168,7 @@
 #define RT_USING_QSPI
 #define RT_USING_PIN
 #define RT_USING_KTIME
+#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
 /* end of Device Drivers */
 
 /* C/C++ and POSIX layer */
@@ -509,7 +510,6 @@
 #define RT_USING_QSPI0
 #define USING_QSPI_CHANNEL0
 #define BSP_USING_ETH
-#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
 #define BSP_USING_PWM
 #define RT_USING_PWM2
 #define BSP_USING_I2C

bsp/phytium/aarch32/configs/e2000d_demo_rtthread

@@ -93,7 +93,7 @@ CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
 CONFIG_RT_VER_NUM=0x50200
-CONFIG_RT_USING_STDC_ATOMIC=y
+# CONFIG_RT_USING_STDC_ATOMIC is not set
 CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32
 # end of RT-Thread Kernel
 
@@ -253,8 +253,9 @@ CONFIG_RT_CHERRYUSB_HOST=y
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_BL is not set
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_HPM is not set
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_AIC is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUVOTON_NUC980 is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUVOTON_MA35D0 is not set
+# CONFIG_RT_CHERRYUSB_HOST_EHCI_MCX is not set
+# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUC980 is not set
+# CONFIG_RT_CHERRYUSB_HOST_EHCI_MA35D0 is not set
 # CONFIG_RT_CHERRYUSB_HOST_EHCI_CUSTOM is not set
 # CONFIG_RT_CHERRYUSB_HOST_DWC2_ST is not set
 # CONFIG_RT_CHERRYUSB_HOST_DWC2_ESP is not set
@@ -280,7 +281,8 @@ CONFIG_RT_CHERRYUSB_HOST_MSC=y
 # CONFIG_RT_CHERRYUSB_HOST_CH34X is not set
 # CONFIG_RT_CHERRYUSB_HOST_CP210X is not set
 # CONFIG_RT_CHERRYUSB_HOST_PL2303 is not set
-# CONFIG_CHERRYUSB_HOST_TEMPLATE is not set
+CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
+# CONFIG_RT_CHERRYUSB_HOST_TEMPLATE is not set
 # end of Device Drivers
 
 #
@@ -622,7 +624,6 @@ CONFIG_RT_USING_ADT_REF=y
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PARSON is not set
-# CONFIG_PKG_USING_RYAN_JSON is not set
 # end of JSON: JavaScript Object Notation, a lightweight data-interchange format
 
 #
@@ -742,8 +743,6 @@ CONFIG_RT_USING_ADT_REF=y
 # CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
 # end of enhanced kernel services
 
-# CONFIG_PKG_USING_AUNITY is not set
-
 #
 # acceleration: Assembly language or algorithmic acceleration packages
 #
@@ -834,29 +833,12 @@ CONFIG_RT_USING_ADT_REF=y
 #
 # STM32 HAL & SDK Drivers
 #
-# CONFIG_PKG_USING_STM32F4_HAL_DRIVER is not set
-# CONFIG_PKG_USING_STM32F4_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
 # CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_STM32WB55_SDK is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # end of STM32 HAL & SDK Drivers
 
-#
-# Infineon HAL Packages
-#
-# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set
-# CONFIG_PKG_USING_INFINEON_CMSIS is not set
-# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set
-# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set
-# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set
-# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set
-# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set
-# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set
-# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set
-# CONFIG_PKG_USING_INFINEON_USBDEV is not set
-# end of Infineon HAL Packages
-
 # CONFIG_PKG_USING_BLUETRUM_SDK is not set
 # CONFIG_PKG_USING_EMBARC_BSP is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -1029,7 +1011,6 @@ CONFIG_RT_USING_ADT_REF=y
 # CONFIG_PKG_USING_SYSTEM_RUN_LED is not set
 # CONFIG_PKG_USING_BT_MX01 is not set
 # CONFIG_PKG_USING_RGPOWER is not set
-# CONFIG_PKG_USING_BT_MX02 is not set
 # CONFIG_PKG_USING_SPI_TOOLS is not set
 # end of peripheral libraries and drivers
 
@@ -1051,7 +1032,6 @@ CONFIG_RT_USING_ADT_REF=y
 #
 # Signal Processing and Control Algorithm Packages
 #
-# CONFIG_PKG_USING_APID is not set
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 # CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
@@ -1394,7 +1374,6 @@ CONFIG_RT_USING_QSPI0=y
 CONFIG_USING_QSPI_CHANNEL0=y
 # CONFIG_USING_QSPI_CHANNEL1 is not set
 CONFIG_BSP_USING_ETH=y
-CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
 CONFIG_BSP_USING_PWM=y
 # CONFIG_RT_USING_PWM0 is not set
 # CONFIG_RT_USING_PWM1 is not set

bsp/phytium/aarch32/configs/e2000d_demo_rtthread.h

@@ -59,7 +59,6 @@
 #define RT_CONSOLEBUF_SIZE 256
 #define RT_CONSOLE_DEVICE_NAME "uart1"
 #define RT_VER_NUM 0x50200
-#define RT_USING_STDC_ATOMIC
 #define RT_BACKTRACE_LEVEL_MAX_NR 32
 /* end of RT-Thread Kernel */
 #define RT_USING_CACHE
@@ -158,6 +157,7 @@
 #define RT_CHERRYUSB_HOST_XHCI
 #define RT_CHERRYUSB_HOST_HID
 #define RT_CHERRYUSB_HOST_MSC
+#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
 /* end of Device Drivers */
 
 /* C/C++ and POSIX layer */
@@ -378,10 +378,6 @@
 
 /* end of STM32 HAL & SDK Drivers */
 
-/* Infineon HAL Packages */
-
-/* end of Infineon HAL Packages */
-
 /* Kendryte SDK */
 
 /* end of Kendryte SDK */
@@ -485,7 +481,6 @@
 #define RT_USING_QSPI0
 #define USING_QSPI_CHANNEL0
 #define BSP_USING_ETH
-#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
 #define BSP_USING_PWM
 #define RT_USING_PWM2
 #define BSP_USING_I2C