Adding GC9A01A

adafruit_rgb_display/gc9a01a.py

@@ -0,0 +1,126 @@
+# SPDX-FileCopyrightText: 2025 Liz Clark for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""
+`adafruit_rgb_display.gc9a01a`
+====================================================
+A simple driver for the GC9A01A-based displays.
+
+* Author(s): Liz Clark
+
+"""
+
+import time
+import busio
+import digitalio
+from micropython import const
+from adafruit_rgb_display.rgb import DisplaySPI
+
+try:
+    from typing import Optional
+except ImportError:
+    pass
+
+__version__ = "0.0.0+auto.0"
+__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_RGB_Display.git"
+
+# Command constants
+_SWRESET = const(0xFE)
+_SLPOUT = const(0x11)
+_NORON = const(0x13)
+_INVOFF = const(0x20)
+_INVON = const(0x21)
+_DISPOFF = const(0x28)
+_DISPON = const(0x29)
+_CASET = const(0x2A)
+_RASET = const(0x2B)
+_RAMWR = const(0x2C)
+_RAMRD = const(0x2E)
+_MADCTL = const(0x36)
+_COLMOD = const(0x3A)
+
+
+class GC9A01A(DisplaySPI):
+    """
+    A simple driver for the GC9A01A-based displays.
+
+    >>> import busio
+    >>> import digitalio
+    >>> import board
+    >>> from adafruit_rgb_display import gc9a01a
+    >>> spi = busio.SPI(clock=board.SCK, MOSI=board.MOSI, MISO=board.MISO)
+    >>> display = gc9a01a.GC9A01A(spi, cs=digitalio.DigitalInOut(board.CE0),
+    ...    dc=digitalio.DigitalInOut(board.D25), rst=digitalio.DigitalInOut(board.D27))
+    >>> display.fill(0x7521)
+    >>> display.pixel(64, 64, 0)
+    """
+
+    _COLUMN_SET = _CASET
+    _PAGE_SET = _RASET
+    _RAM_WRITE = _RAMWR
+    _RAM_READ = _RAMRD
+    _INIT = (
+        (_SWRESET, None),
+        (0xEF, None),  # Inter Register Enable2
+        (0xB6, b"\x00\x00"),  # Display Function Control
+        (_MADCTL, b"\x48"),  # Memory Access Control - Set to BGR color filter panel
+        (_COLMOD, b"\x05"),  # Interface Pixel Format - 16 bits per pixel
+        (0xC3, b"\x13"),  # Power Control 2
+        (0xC4, b"\x13"),  # Power Control 3
+        (0xC9, b"\x22"),  # Power Control 4
+        (0xF0, b"\x45\x09\x08\x08\x26\x2a"),  # SET_GAMMA1
+        (0xF1, b"\x43\x70\x72\x36\x37\x6f"),  # SET_GAMMA2
+        (0xF2, b"\x45\x09\x08\x08\x26\x2a"),  # SET_GAMMA3
+        (0xF3, b"\x43\x70\x72\x36\x37\x6f"),  # SET_GAMMA4
+        (0x66, b"\x3c\x00\xcd\x67\x45\x45\x10\x00\x00\x00"),
+        (0x67, b"\x00\x3c\x00\x00\x00\x01\x54\x10\x32\x98"),
+        (0x74, b"\x10\x85\x80\x00\x00\x4e\x00"),
+        (0x98, b"\x3e\x07"),
+        (0x35, None),  # Tearing Effect Line ON
+        (_INVON, None),  # Display Inversion ON
+        (_SLPOUT, None),  # Sleep Out Mode
+        (_NORON, None),  # Normal Display Mode ON
+        (_DISPON, None),  # Display ON
+    )
+
+    # pylint: disable-msg=useless-super-delegation, too-many-arguments
+    def __init__(
+        self,
+        spi: busio.SPI,
+        dc: digitalio.DigitalInOut,
+        cs: digitalio.DigitalInOut,
+        rst: Optional[digitalio.DigitalInOut] = None,
+        width: int = 240,
+        height: int = 240,
+        baudrate: int = 24000000,
+        polarity: int = 0,
+        phase: int = 0,
+        *,
+        x_offset: int = 0,
+        y_offset: int = 0,
+        rotation: int = 0
+    ) -> None:
+        super().__init__(
+            spi,
+            dc,
+            cs,
+            rst,
+            width,
+            height,
+            baudrate=baudrate,
+            polarity=polarity,
+            phase=phase,
+            x_offset=x_offset,
+            y_offset=y_offset,
+            rotation=rotation,
+        )
+
+    def init(self) -> None:
+        """Initialize the display."""
+        if self.rst:
+            self.rst.value = 0
+            time.sleep(0.05)
+            self.rst.value = 1
+            time.sleep(0.05)
+
+        super().init()