Remove PodSecurityPolicy when k8s version >=1.25

.github/workflows/build-and-test.yaml

@@ -168,7 +168,7 @@ jobs:
     runs-on: ubuntu-20.04
     strategy:
       matrix:
-        k8sVersion: ["1.18", "1.19", "1.20", "1.21", "1.22", "1.23"]
+        k8sVersion: ["1.18", "1.19", "1.20", "1.21", "1.22", "1.23", "1.24", "1.25"]
     steps:
     - name: Set up Go 1.x
       uses: actions/setup-go@v2

README.md

@@ -94,7 +94,6 @@ The `enableSqsTerminationDraining` must be set to false for these configuration
 
 The Queue Processor Mode does not allow for fine-grained configuration of which events are handled through helm configuration keys. Instead, you can modify your Amazon EventBridge rules to not send certain types of events to the SQS Queue so that NTH does not process those events. All events when operating in Queue Processor mode are Cordoned and Drained unless the `cordon-only` flag is set to true.
 
-
 The `enableSqsTerminationDraining` flag turns on Queue Processor Mode. When Queue Processor Mode is enabled, IMDS mode will be disabled, even if you explicitly enabled any of the IMDS configuration keys. NTH cannot respond to queue events AND monitor IMDS paths. In this case, it is safe to disable IMDS for the NTH pod.
 
 <details opened>
@@ -105,6 +104,9 @@ The `enableSqsTerminationDraining` flag turns on Queue Processor Mode. When Queu
 
 The termination handler DaemonSet installs into your cluster a [ServiceAccount](https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/), [ClusterRole](https://kubernetes.io/docs/reference/access-authn-authz/rbac/), [ClusterRoleBinding](https://kubernetes.io/docs/reference/access-authn-authz/rbac/), and a [DaemonSet](https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/). All four of these Kubernetes constructs are required for the termination handler to run properly.
 
+#### Pod Security Admission
+
+When using Kubernetes [Pod Security Admission](https://kubernetes.io/docs/concepts/security/pod-security-admission/) it is recommended to assign the `[privileged](https://kubernetes.io/docs/concepts/security/pod-security-standards/#privileged)` level.
 
 #### Kubectl Apply
 
@@ -376,6 +378,10 @@ IAM Policy for aws-node-termination-handler Deployment:
 
 ### Installation
 
+#### Pod Security Admission
+
+When using Kubernetes [Pod Security Admission](https://kubernetes.io/docs/concepts/security/pod-security-admission/) it is recommended to assign the `[baseline](https://kubernetes.io/docs/concepts/security/pod-security-standards/#baseline)` level.
+
 #### Helm
 
 The easiest and most commonly used method to configure the termination handler is via [helm](https://helm.sh/).  The chart for this project is hosted in the [eks-charts](https://github.com/aws/eks-charts) repository.

config/helm/aws-node-termination-handler/README.md

@@ -56,7 +56,7 @@ The configuration in this table applies to all AWS Node Termination Handler mode
 | `serviceAccount.name`              | Service account to be used. If not set and `serviceAccount.create` is `true`, a name is generated using the full name template.                                                                                                                                                                                                                                                        | `nil`                                                 |
 | `serviceAccount.annotations`       | Annotations to add to the service account.                                                                                                                                                                                                                                                                                                                                             | `{}`                                                  |
 | `rbac.create`                      | If `true`, create the RBAC resources.                                                                                                                                                                                                                                                                                                                                                  | `true`                                                |
-| `rbac.pspEnabled`                  | If `true`, create a pod security policy resource.                                                                                                                                                                                                                                                                                                                                      | `true`                                                |
+| `rbac.pspEnabled`                  | If `true`, create a pod security policy resource. Note: `PodSecurityPolicy`s will not be created when Kubernetes version is 1.25 or later.                                                                                                                                                                                                                                                                                     | `true`                                                |
 | `customLabels`                     | Labels to add to all resource metadata.                                                                                                                                                                                                                                                                                                                                                | `{}`                                                  |
 | `podLabels`                        | Labels to add to the pod.                                                                                                                                                                                                                                                                                                                                                              | `{}`                                                  |
 | `podAnnotations`                   | Annotations to add to the pod.                                                                                                                                                                                                                                                                                                                                                         | `{}`                                                  |

config/helm/aws-node-termination-handler/templates/psp.yaml

@@ -1,4 +1,4 @@
-{{- if .Values.rbac.pspEnabled }}
+{{- if and (.Values.rbac.pspEnabled) (semverCompare "<1.25-0" .Capabilities.KubeVersion.GitVersion) }}
 apiVersion: policy/v1beta1
 kind: PodSecurityPolicy
 metadata:

config/helm/aws-node-termination-handler/values.yaml

@@ -23,7 +23,7 @@ serviceAccount:
 rbac:
   # Specifies whether RBAC resources should be created
   create: true
-  # Specifies if PodSecurityPolicy resources should be created
+  # Specifies if PodSecurityPolicy resources should be created. PodSecurityPolicy will not be created when Kubernetes version is 1.25 or later.
   pspEnabled: true
 
 customLabels: {}

config/helm/localstack/templates/psp.yaml

@@ -1,4 +1,4 @@
-{{- if .Values.rbac.pspEnabled }}
+{{- if and (.Values.rbac.pspEnabled) (semverCompare "<1.25-0" .Capabilities.KubeVersion.GitVersion) }}
 apiVersion: policy/v1beta1
 kind: PodSecurityPolicy
 metadata:

config/helm/squid/templates/psp.yaml

@@ -1,4 +1,4 @@
-{{- if .Values.rbac.pspEnabled }}
+{{- if and (.Values.rbac.pspEnabled) (semverCompare "<1.25-0" .Capabilities.KubeVersion.GitVersion) }}
 apiVersion: policy/v1beta1
 kind: PodSecurityPolicy
 metadata:

config/helm/webhook-test-proxy/templates/psp.yaml

@@ -1,4 +1,4 @@
-{{- if .Values.rbac.pspEnabled }}
+{{- if and (.Values.rbac.pspEnabled) (semverCompare "<1.25-0" .Capabilities.KubeVersion.GitVersion) }}
 apiVersion: policy/v1beta1
 kind: PodSecurityPolicy
 metadata:

test/k8s-local-cluster-test/provision-cluster

@@ -7,7 +7,12 @@ TEST_ID=$(uuidgen | cut -d'-' -f1 | tr '[:upper:]' '[:lower:]')
 CLUSTER_NAME_BASE=$(uuidgen | cut -d'-' -f1 | tr '[:upper:]' '[:lower:]')
 OVERRIDE_PATH=0
 KIND_CONFIG_FILE=$SCRIPTPATH/kind-three-node-cluster.yaml
+use_psp=false
 
+# shellcheck disable=SC2034
+K8_1_25="kindest/node:v1.25.3@sha256:f1de3b0670462f43280114eccceab8bf1b9576d2afe0582f8f74529da6fd0365"
+# shellcheck disable=SC2034
+K8_1_24="kindest/node:v1.24.7@sha256:5c015142d9b60a0f6c45573f809957076514e38ec973565e2b2fe828b91597f5"
 # shellcheck disable=SC2034
 K8_1_23="kindest/node:v1.23.5@sha256:1a72748086bc24ed6163de1d1e33cc0e2eb5a1eb5ebffdb15b53c3bcd5376a6f"
 # shellcheck disable=SC2034
@@ -23,8 +28,8 @@ K8_1_18="kindest/node:v1.18.19@sha256:7af1492e19b3192a79f606e43c35fb741e520d195f
 
 K8_VERSION="$K8_1_20"
 KUBECTL_VERSION=$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)
-KIND_VERSION="0.11.1"
-HELM_VERSION="3.7.1"
+KIND_VERSION="0.17.0"
+HELM_VERSION="3.10.0"
 
 echoerr() { echo "$@" 1>&2; }
 
@@ -55,7 +60,12 @@ while getopts "b:i:v:k:o" opt; do
         echoerr "👉 Test Run: $TEST_ID 👈"
       ;;
     v ) # K8s version to provision
-        OPTARG="K8_`echo $OPTARG | sed 's/\./\_/g'`"
+        maj_ver=`echo $OPTARG | cut -d '.' -f 1`
+        min_ver=`echo $OPTARG | cut -d '.' -f 2`
+        if [[ $maj_ver -eq 1 && $min_ver -lt 25 ]]; then
+          use_psp=true
+        fi
+        OPTARG="K8_${maj_ver}_${min_ver}"
         if [ ! -z ${OPTARG+x} ]; then
             K8_VERSION=${!OPTARG}
         else
@@ -124,12 +134,19 @@ fi
 # Disable spinners and color in kind output
 export TERM=dumb
 echoerr "🥑 Creating k8s cluster using \"kind\""
+if [[ "$use_psp" = false ]]; then
+  no_psp_kind_config_file="${TMP_DIR}/`basename $KIND_CONFIG_FILE`"
+  cat $KIND_CONFIG_FILE | sed 's/,PodSecurityPolicy//' > "${no_psp_kind_config_file}"
+  KIND_CONFIG_FILE="${no_psp_kind_config_file}"
+fi
 retry 3 kind create cluster --name "$CLUSTER_NAME" --image $K8_VERSION --config "$KIND_CONFIG_FILE" --kubeconfig $TMP_DIR/kubeconfig 1>&2
 
 echo "$CLUSTER_NAME" > "$TMP_DIR/clustername"
 echoerr "👍 Created k8s cluster using \"kind\""
 
-kubectl apply -f "$SCRIPTPATH/psp-default.yaml" --context "kind-$CLUSTER_NAME" --kubeconfig "$TMP_DIR/kubeconfig" 1>&2
-kubectl apply -f "$SCRIPTPATH/psp-privileged.yaml" --context "kind-$CLUSTER_NAME" --kubeconfig "$TMP_DIR/kubeconfig" 1>&2
+if [[ "$use_psp" = true ]]; then
+  kubectl apply -f "$SCRIPTPATH/psp-default.yaml" --context "kind-$CLUSTER_NAME" --kubeconfig "$TMP_DIR/kubeconfig" 1>&2
+  kubectl apply -f "$SCRIPTPATH/psp-privileged.yaml" --context "kind-$CLUSTER_NAME" --kubeconfig "$TMP_DIR/kubeconfig" 1>&2
+fi
 
 echo "$TMP_DIR"

test/k8s-local-cluster-test/run-test

@@ -136,7 +136,7 @@ USAGE=$(cat << 'EOM'
             -n          Node Termination Handler Docker Image
             -d          use GOPROXY=direct to bypass proxy.golang.org
             -o          Override path w/ your own kubectl and kind binaries
-            -v          Kubernetes Version (Default: 1.20) [1.18, 1.19, 1.20, 1.21, 1.22, and 1.23]
+            -v          Kubernetes Version (Default: 1.20) [1.18, 1.19, 1.20, 1.21, 1.22, 1.23, 1.24, and 1.25]
             -w          Webhook Docker Image
 
 EOM