pvlib · kandersolar · Jul 5, 2023 · Jul 1, 2023 · Jul 1, 2023 · Jul 3, 2023
diff --git a/ci/requirements-py3.10.yml b/ci/requirements-py3.10.yml
@@ -25,4 +25,4 @@ dependencies:
     - statsmodels
     - pip:
         - nrel-pysam>=2.0
-        - pvfactors==1.5.2
+        - solarfactors
diff --git a/ci/requirements-py3.11.yml b/ci/requirements-py3.11.yml
@@ -25,4 +25,4 @@ dependencies:
     - statsmodels
     - pip:
         - nrel-pysam>=2.0
-        - pvfactors==1.5.2
+        - solarfactors
diff --git a/ci/requirements-py3.7.yml b/ci/requirements-py3.7.yml
@@ -25,4 +25,4 @@ dependencies:
     - statsmodels
     - pip:
         - nrel-pysam>=2.0
-        - pvfactors==1.5.2
+        - solarfactors
diff --git a/ci/requirements-py3.8.yml b/ci/requirements-py3.8.yml
@@ -25,4 +25,4 @@ dependencies:
     - statsmodels
     - pip:
         - nrel-pysam>=2.0
-        - pvfactors==1.5.2
+        - solarfactors
diff --git a/ci/requirements-py3.9.yml b/ci/requirements-py3.9.yml
@@ -25,4 +25,4 @@ dependencies:
     - statsmodels
     - pip:
         - nrel-pysam>=2.0
-        - pvfactors==1.5.2
+        - solarfactors
diff --git a/docs/examples/bifacial/plot_bifi_model_mc.py b/docs/examples/bifacial/plot_bifi_model_mc.py
@@ -18,6 +18,13 @@
 #
 # Future versions of pvlib may make it easier to do bifacial modeling
 # with ``ModelChain``.
+#
+# .. attention::
+#    To run this example, the ``solarfactors`` package (an implementation
+#    of the pvfactors model) must be installed.  It can be installed with
+#    either ``pip install solarfactors`` or ``pip install pvlib[optional]``,
+#    which installs all of pvlib's optional dependencies.
+
 
 import pandas as pd
 from pvlib import pvsystem

diff --git a/docs/examples/bifacial/plot_bifi_model_pvwatts.py b/docs/examples/bifacial/plot_bifi_model_pvwatts.py
@@ -10,6 +10,12 @@
 # :py:func:`pvlib.pvsystem.pvwatts_dc` with the
 # :py:func:`pvlib.bifacial.pvfactors.pvfactors_timeseries` function to
 # transpose GHI data to both front and rear Plane of Array (POA) irradiance.
+#
+# .. attention::
+#    To run this example, the ``solarfactors`` package (an implementation
+#    of the pvfactors model) must be installed.  It can be installed with
+#    either ``pip install solarfactors`` or ``pip install pvlib[optional]``,
+#    which installs all of pvlib's optional dependencies.
 
 import pandas as pd
 from pvlib import location

diff --git a/docs/examples/bifacial/plot_pvfactors_fixed_tilt.py b/docs/examples/bifacial/plot_pvfactors_fixed_tilt.py
@@ -11,6 +11,12 @@
 # fixed-tilt systems correctly.
 # This example shows how to model rear-side irradiance on a fixed-tilt
 # array using :py:func:`pvlib.bifacial.pvfactors.pvfactors_timeseries`.
+#
+# .. attention::
+#    To run this example, the ``solarfactors`` package (an implementation
+#    of the pvfactors model) must be installed.  It can be installed with
+#    either ``pip install solarfactors`` or ``pip install pvlib[optional]``,
+#    which installs all of pvlib's optional dependencies.
 
 import pandas as pd
 from pvlib import location

diff --git a/docs/sphinx/source/conf.py b/docs/sphinx/source/conf.py
@@ -297,7 +297,8 @@ def setup(app):
     'pull': ('https://github.com/pvlib/pvlib-python/pull/%s', 'GH'),
     'wiki': ('https://github.com/pvlib/pvlib-python/wiki/%s', 'wiki '),
     'doi': ('http://dx.doi.org/%s', 'DOI: '),
-    'ghuser': ('https://github.com/%s', '@')
+    'ghuser': ('https://github.com/%s', '@'),
+    'discuss': ('https://github.com/pvlib/pvlib-python/discussions/%s', 'GH'),
 }
 
 # -- Options for manual page output ---------------------------------------

diff --git a/docs/sphinx/source/user_guide/bifacial.rst b/docs/sphinx/source/user_guide/bifacial.rst
@@ -15,7 +15,7 @@ surfaces.
 pvlib-python provides two groups of functions for estimating front and back
 irradiance:
 
-1. a wrapper for convenient use of the pvfactors package:
+1. a wrapper for convenient use of the pvfactors model:
 :py:func:`~pvlib.bifacial.pvfactors.pvfactors_timeseries`
 
 2. the infinite sheds bifacial model:
@@ -26,12 +26,25 @@ irradiance:
 pvfactors
 ---------
 
-The `pvfactors <https://sunpower.github.io/pvfactors/>`_ package calculates
+The pvfactors model calculates
 incident irradiance on the front and back surfaces of an array. pvfactors uses
 a 2D geometry which assumes that the array is made up of long, regular rows.
 Irradiance is calculated in the middle of a row; end-of-row effects are not
 included. pvfactors can model arrays in fixed racking or on single-axis
-trackers.
+trackers with a user-configurable number of rows.
+
+Prior to pvlib version 0.10.1, pvlib used the original SunPower implementation
+of the model via the `pvfactors <https://github.com/sunpower/pvfactors>`_
+package.  Starting in version 0.10.1, pvlib instead uses
+`solarfactors <https://github.com/pvlib/solarfactors>`_, a drop-in
+replacement implementation maintained by the pvlib community.
+This switch was made when the original ``pvfactors`` package became
+difficult to install in modern python environments.
+``solarfactors`` implements the same model as ``pvfactors`` and is kept
+up to date and working over time.  Note that "solarfactors" is only the name
+on PyPI (meaning it is installed via ``pip install solarfactors``);
+after installation, Python code still accesses it as "pvfactors"
+(e.g. ``import pvfactors``).
 
 
 Infinite Sheds

diff --git a/docs/sphinx/source/whatsnew.rst b/docs/sphinx/source/whatsnew.rst
@@ -6,6 +6,7 @@ What's New
 
 These are new features and improvements of note in each release.
 
+.. include:: whatsnew/v0.10.1.rst
 .. include:: whatsnew/v0.10.0.rst
 .. include:: whatsnew/v0.9.5.rst
 .. include:: whatsnew/v0.9.4.rst

diff --git a/docs/sphinx/source/whatsnew/v0.10.1.rst b/docs/sphinx/source/whatsnew/v0.10.1.rst
@@ -1,34 +1,12 @@
 .. _whatsnew_01010:
 
 
-v0.10.1 (Anticipated September, 2023)
--------------------------------------
-
-
-Deprecations
-~~~~~~~~~~~~
-
-
-Enhancements
-~~~~~~~~~~~~
-
-
-Bug fixes
-~~~~~~~~~
-
-
-Testing
-~~~~~~~
-
-
-Documentation
-~~~~~~~~~~~~~
-
-
-Requirements
-~~~~~~~~~~~~
-
-
-Contributors
-~~~~~~~~~~~~
+v0.10.1 (July 3, 2023)
+----------------------
+
+To resolve an installation issue with ``pvfactors`` and ``shapely``,
+this release drops the optional ``pvfactors`` dependency and replaces
+it with ``solarfactors``, a fork of ``pvfactors`` maintained by the
+pvlib community.  This change should not affect any user code.
+(:issue:`1796`, :pull:`1797`, :discuss:`1657`)
 
diff --git a/docs/sphinx/source/whatsnew/v0.10.2.rst b/docs/sphinx/source/whatsnew/v0.10.2.rst
@@ -0,0 +1,34 @@
+.. _whatsnew_01020:
+
+
+v0.10.2 (Anticipated September, 2023)
+-------------------------------------
+
+
+Deprecations
+~~~~~~~~~~~~
+
+
+Enhancements
+~~~~~~~~~~~~
+
+
+Bug fixes
+~~~~~~~~~
+
+
+Testing
+~~~~~~~
+
+
+Documentation
+~~~~~~~~~~~~~
+
+
+Requirements
+~~~~~~~~~~~~
+
+
+Contributors
+~~~~~~~~~~~~
+
diff --git a/pvlib/bifacial/pvfactors.py b/pvlib/bifacial/pvfactors.py
@@ -1,6 +1,7 @@
 """
 The ``bifacial.pvfactors`` module contains functions for modeling back surface
-plane-of-array irradiance using the pvfactors package.
+plane-of-array irradiance using an external implementaton of the pvfactors
+model (either ``solarfactors`` or the original ``pvfactors``).
 """
 
 import pandas as pd
@@ -15,11 +16,15 @@ def pvfactors_timeseries(
         horizon_band_angle=15.):
     """
     Calculate front and back surface plane-of-array irradiance on
-    a fixed tilt or single-axis tracker PV array configuration, and using
-    the open-source "pvfactors" package.  pvfactors implements the model
-    described in [1]_.
-    Please refer to pvfactors online documentation for more details:
-    https://sunpower.github.io/pvfactors/
+    a fixed tilt or single-axis tracker PV array configuration using
+    the pvfactors model.
+
+    The pvfactors bifacial irradiance model is described in [1]_.
+
+    .. versionchanged:: 0.10.1
+       It is now recommended to install the ``solarfactors`` package
+       (``pip install solarfactors``) instead of ``pvfactors`` for this
+       function.  For more information, see :ref:`bifacial`.
 
     Parameters
     ----------

diff --git a/setup.py b/setup.py
@@ -47,11 +47,11 @@
                  'pytest-remotedata']
 EXTRAS_REQUIRE = {
     'optional': ['cython', 'ephem', 'nrel-pysam', 'numba',
-                 'pvfactors', 'statsmodels'],
+                 'solarfactors', 'statsmodels'],
     'doc': ['ipython', 'matplotlib', 'sphinx == 4.5.0',
             'pydata-sphinx-theme == 0.8.1', 'sphinx-gallery',
             'docutils == 0.15.2', 'pillow',
-            'sphinx-toggleprompt >= 0.0.5', 'pvfactors'],
+            'sphinx-toggleprompt >= 0.0.5', 'solarfactors'],
     'test': TESTS_REQUIRE
 }
 EXTRAS_REQUIRE['all'] = sorted(set(sum(EXTRAS_REQUIRE.values(), [])))