Initial T2 experiment

cirq/experiments/__init__.py

@@ -39,3 +39,7 @@
     t1_decay,
     T1DecayResult,
 )
+from cirq.experiments.t2_decay_experiment import (
+    t2_decay,
+    T2DecayResult,
+)

cirq/experiments/t2_decay_experiment.py

@@ -0,0 +1,334 @@
+# Copyright 2019 The Cirq Developers
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+import enum
+
+from typing import Any, Optional, TYPE_CHECKING
+
+import pandas as pd
+import sympy
+from matplotlib import pyplot as plt
+
+from cirq import circuits, devices, ops, study, value, work
+from cirq._compat import proper_repr
+
+if TYPE_CHECKING:
+    import cirq
+
+
+class ExperimentType(enum.Enum):
+    RAMSEY = 1  # Often denoted as t2*
+    HAHN_ECHO = 2  # Spin echo or t2
+    CPMG = 3  # Carr-Purcell-Meiboom-Gill sequence
+
+
+_T2_COLUMNS = ['delay_ns', 0, 1]
+
+
+def t2_decay(sampler: work.Sampler,
+             *,
+             qubit: devices.GridQubit,
+             experiment_type: 'ExperimentType' = ExperimentType.RAMSEY,
+             num_points: int,
+             max_delay: 'cirq.DURATION_LIKE',
+             min_delay: 'cirq.DURATION_LIKE' = None,
+             repetitions: int = 1000) -> 'cirq.experiments.T2DecayResult':
+    """Runs a t2 transverse relaxation experiment.
+
+    Initializes a qubit into a superposition state, evolves the system using
+    rules determined by the experiment type and by the delay parameters,
+    then rotates back for measurement.  This will measure the phase decoherence
+    decay.  This experiment has three types of T2 metrics, each which measure
+    a different slice of the noise spectrum.
+
+    For the Ramsey experiment type (often denoted T2*), the state will be
+    prepared with a square root Y gate (`cirq.Y ** 0.5`) and then waits for
+    a variable amount of time.  After this time, it will do basic state
+    tomography to measure the expectation of the Pauli-X and Pauli-Y operators
+    by performing either a `cirq.Y ** -0.5` or `cirq.X ** -0.5`.  The square of
+    these two measurements is summed to determine the length of the Bloch
+    vector. This experiment measures the phase decoherence of the system under
+    free evolution.
+
+    For the Hahn echo experiment (often denoted T2 or spin echo), the state
+    will also be prepared with a square root Y gate (`cirq.Y ** 0.5`).
+    However, during the mid-point of the delay time being measured, a pi-pulse
+    (`cirq.X`) gate will be applied to cancel out inhomogeneous dephasing.
+    The same method of measuring the final state as Ramsey experiment is applied
+    after the second half of the delay period.
+
+    CPMG, or the Carr-Purcell-Meiboom-Gill sequence, is currently not
+    implemented.
+
+    Args:
+        sampler: The quantum engine or simulator to run the circuits.
+        qubit: The qubit under test.
+        experiment_type: The type of T2 test to run.
+        num_points: The number of evenly spaced delays to test.
+        max_delay: The largest delay to test.
+        min_delay: The smallest delay to test. Defaults to no delay.
+        repetitions: The number of repetitions of the circuit
+             for each delay and for each tomography result.
+
+    Returns:
+        A T2DecayResult object that stores and can plot the data.
+    """
+    min_delay_dur = value.Duration(min_delay)
+    max_delay_dur = value.Duration(max_delay)
+
+    # Input validation
+    if repetitions <= 0:
+        raise ValueError('repetitions <= 0')
+    if max_delay_dur < min_delay_dur:
+        raise ValueError('max_delay < min_delay')
+    if min_delay_dur < 0:
+        raise ValueError('min_delay < 0')
+
+    # Initialize values used in sweeps
+    delay_var = sympy.Symbol('delay_ns')
+    inv_x_var = sympy.Symbol('inv_x')
+    inv_y_var = sympy.Symbol('inv_y')
+
+    delay_sweep = study.Linspace(delay_var,
+                                 start=min_delay_dur.total_nanos(),
+                                 stop=max_delay_dur.total_nanos(),
+                                 length=num_points)
+
+    if experiment_type == ExperimentType.RAMSEY:
+        # Ramsey T2* experiment
+        # Use sqrt(Y) to flip to the equator.
+        # Evolve the state for a given amount of delay time
+        # Then measure the state in both X and Y bases.
+
+        circuit = circuits.Circuit(
+            ops.Y(qubit)**0.5,
+            ops.WaitGate(value.Duration(nanos=delay_var))(qubit),
+            ops.X(qubit)**inv_x_var,
+            ops.Y(qubit)**inv_y_var,
+            ops.measure(qubit, key='output'),
+        )
+        tomography_sweep = study.Zip(
+            study.Points('inv_x', [0.0, -0.5]),
+            study.Points('inv_y', [-0.5, 0.0]),
+        )
+        sweep = study.Product(delay_sweep, tomography_sweep)
+    elif experiment_type == ExperimentType.HAHN_ECHO:
+        # Hahn / Spin Echo T2 experiment
+        # Use sqrt(Y) to flip to the equator.
+        # Evolve the state for half the given amount of delay time
+        # Flip the state using an X gate
+        # Evolve the state for half the given amount of delay time
+        # Then measure the state in both X and Y bases.
+
+        # TODO: Should be 0.5 * delay_var
+        circuit = circuits.Circuit(
+            ops.Y(qubit)**0.5,
+            ops.WaitGate(value.Duration(nanos=delay_var))(qubit),
+            ops.X(qubit),
+            ops.WaitGate(value.Duration(nanos=delay_var))(qubit),
+            ops.X(qubit)**inv_x_var,
+            ops.Y(qubit)**inv_y_var,
+            ops.measure(qubit, key='output'),
+        )
+        tomography_sweep = study.Zip(
+            study.Points('inv_x', [0.0, 0.5]),
+            study.Points('inv_y', [-0.5, 0.0]),
+        )
+        sweep = study.Product(delay_sweep, tomography_sweep)
+    else:
+        raise ValueError(f'Experiment type {experiment_type} not supported')
+
+    # Tabulate measurements into a histogram
+    results = sampler.sample(circuit, params=sweep, repetitions=repetitions)
+
+    y_basis_measurements = results[results.inv_y < 0]
+    y_basis_tabulation = pd.crosstab(y_basis_measurements.delay_ns,
+                                     y_basis_measurements.output).reset_index()
+    x_basis_measurements = results[abs(results.inv_x) > 0]
+    x_basis_tabulation = pd.crosstab(x_basis_measurements.delay_ns,
+                                     x_basis_measurements.output).reset_index()
+
+    # If all measurements are 1 or 0, fill in the missing column with all zeros.
+    for tab in [x_basis_tabulation, y_basis_tabulation]:
+        for col_index, name in [(1, 0), (2, 1)]:
+            if name not in tab:
+                tab.insert(col_index, name, [0] * tab.shape[0])
+
+    # Return the results in a container object
+    return T2DecayResult(x_basis_tabulation, y_basis_tabulation)
+
+
+class T2DecayResult:
+    """Results from a T2 decay experiment.
+
+     This object is a container for the measurement results in each basis
+     for each amount of delay.  These can be used to calculate Pauli
+     expectation values, length of the Bloch vector, and various fittings of
+     the data to calculate estimated T2 phase decay times.
+     """
+
+    def __init__(self, x_basis_data: pd.DataFrame, y_basis_data: pd.DataFrame):
+        """
+        Args:
+            data: A data frame with three columns:
+                delay_ns, false_count, true_count.
+        """
+        if list(x_basis_data.columns) != _T2_COLUMNS:
+            raise ValueError(f'x_basis_data must have columns {_T2_COLUMNS} '
+                             f'but had {list(x_basis_data.columns)}')
+        if list(y_basis_data.columns) != _T2_COLUMNS:
+            raise ValueError(f'y_basis_data must have columns {_T2_COLUMNS} '
+                             f'but had {list(y_basis_data.columns)}')
+        self._x_basis_data = x_basis_data
+        self._y_basis_data = y_basis_data
+        self._expectation_pauli_x = self._expectation(x_basis_data)
+        self._expectation_pauli_y = self._expectation(y_basis_data)
+
+    def _expectation(self, data) -> pd.DataFrame:
+        """Calculates the expected value of the Pauli operator.
+
+        Assuming that the data is measured in the Pauli basis of the operator,
+        then the expectation of the Pauli operator would be +1 if the
+        measurement is all ones and -1 if the measurement is all zeros.
+
+        Returns:
+            Data frame with two columns 'delay_ns' and 'value'
+        """
+        xs = data['delay_ns']
+        ones = data[1]
+        zeros = data[0]
+        pauli_expectation = (2 * (ones / (ones + zeros))) - 1.0
+        return pd.DataFrame({'delay_ns': xs, 'value': pauli_expectation})
+
+    @property
+    def expectation_pauli_x(self) -> pd.DataFrame:
+        """A data frame with delay_ns, value columns.
+
+        This value contains the expectation of the Pauli X operator as
+        estimated by measurement outcomes.
+        """
+        return self._expectation_pauli_x
+
+    @property
+    def expectation_pauli_y(self) -> pd.DataFrame:
+        """A data frame with delay_ns, value columns.
+
+        This value contains the expectation of the Pauli X operator as
+        estimated by measurement outcomes.
+        """
+        return self._expectation_pauli_y
+
+    def plot_expectations(self,
+                          ax: Optional[plt.Axes] = None,
+                          **plot_kwargs: Any) -> plt.Axes:
+        """Plots the expectation values of Pauli operators versus delay time.
+
+        Args:
+            ax: the plt.Axes to plot on. If not given, a new figure is created,
+                plotted on, and shown.
+            **plot_kwargs: Arguments to be passed to 'plt.Axes.plot'.
+
+        Returns:
+            The plt.Axes containing the plot.
+        """
+        show_plot = not ax
+        if show_plot:
+            fig, ax = plt.subplots(1, 1, figsize=(8, 8))
+        assert ax is not None
+        ax.set_ylim(ymin=-2, ymax=2)
+
+        # Plot different expectation values in different colors.
+        ax.plot(self._expectation_pauli_x['delay_ns'],
+                self._expectation_pauli_x['value'],
+                'bo-',
+                label='<X>',
+                **plot_kwargs)
+        ax.plot(self._expectation_pauli_y['delay_ns'],
+                self._expectation_pauli_y['value'],
+                'go-',
+                label='<Y>',
+                **plot_kwargs)
+
+        ax.set_xlabel(
+            r"Delay between initialization and measurement (nanoseconds)")
+        ax.set_ylabel('Pauli Operator Expectation')
+        ax.set_title('T2 Decay Pauli Expectations')
+        ax.legend()
+        if show_plot:
+            fig.show()
+        return ax
+
+    def plot_bloch_vector(self,
+                          ax: Optional[plt.Axes] = None,
+                          **plot_kwargs: Any) -> plt.Axes:
+        """Plots the estimated length of the Bloch vector versus time.
+
+        This plot estimates the Bloch Vector by squaring the Pauli expectation
+        value of X and adding it to the square of the Pauli expectation value of
+        Y.  This essentially projects the state into the XY plane.
+
+        Note that Z expectation is not considered, since T1 related amplitude
+        damping will generally push this value towards |0>
+        (expectation <Z> = -1) which will significantly distort the T2 numbers.
+
+        Args:
+            ax: the plt.Axes to plot on. If not given, a new figure is created,
+                plotted on, and shown.
+            **plot_kwargs: Arguments to be passed to 'plt.Axes.plot'.
+
+        Returns:
+            The plt.Axes containing the plot.
+         """
+        show_plot = not ax
+        if show_plot:
+            fig, ax = plt.subplots(1, 1, figsize=(8, 8))
+        assert ax is not None
+        ax.set_ylim(ymin=0, ymax=1)
+
+        # Estimate length of Bloch vector (projected to xy plane)
+        # by squaring <X> and <Y> expectation values
+        bloch_vector = (self._expectation_pauli_x**2 +
+                        self._expectation_pauli_y**2)
+
+        ax.plot(self._expectation_pauli_x['delay_ns'], bloch_vector, 'r+-',
+                **plot_kwargs)
+        ax.set_xlabel(
+            r"Delay between initialization and measurement (nanoseconds)")
+        ax.set_ylabel('Bloch Vector X-Y Projection Squared')
+        ax.set_title('T2 Decay Experiment Data')
+        if show_plot:
+            fig.show()
+        return ax
+
+    def __str__(self):
+        return (f'T2DecayResult with data:\n'
+                f'<X>\n{self._x_basis_data}\n<Y>\n{self._y_basis_data}')
+
+    def __eq__(self, other):
+        if not isinstance(other, type(self)):
+            return NotImplemented
+        return (self._expectation_pauli_x.equals(other._expectation_pauli_x) and
+                self._expectation_pauli_y.equals(other._expectation_pauli_y))
+
+    def __repr__(self):
+        return (f'cirq.experiments.T2DecayResult('
+                f'x_basis_data={proper_repr(self._x_basis_data)}, '
+                f'y_basis_data={proper_repr(self._y_basis_data)})')
+
+    def _repr_pretty_(self, p: Any, cycle: bool) -> None:
+        """Text output in Jupyter."""
+        if cycle:
+            # There should never be a cycle.  This is just in case.
+            p.text('T2DecayResult(...)')
+        else:
+            p.text(str(self))