branches in rpi/linux #94
Comments
|
3.2.27 seems stable. rpi-update releases come from it. it is the new default. |
anholt
referenced
this issue
in anholt/linux
Jun 18, 2015
Using _bh variant for spin locks causes this kind of warning: Starting logging: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3 at /ssd_drive/linux/kernel/softirq.c:151 __local_bh_enable_ip+0xe8/0xf4() Modules linked in: CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.1.0-rc2+ #94 Hardware name: Atmel SAMA5 [<c0013c04>] (unwind_backtrace) from [<c00118a4>] (show_stack+0x10/0x14) [<c00118a4>] (show_stack) from [<c001bbcc>] (warn_slowpath_common+0x80/0xac) [<c001bbcc>] (warn_slowpath_common) from [<c001bc14>] (warn_slowpath_null+0x1c/0x24) [<c001bc14>] (warn_slowpath_null) from [<c001e28c>] (__local_bh_enable_ip+0xe8/0xf4) [<c001e28c>] (__local_bh_enable_ip) from [<c01fdbd0>] (at_xdmac_device_terminate_all+0xf4/0x100) [<c01fdbd0>] (at_xdmac_device_terminate_all) from [<c02221a4>] (atmel_complete_tx_dma+0x34/0xf4) [<c02221a4>] (atmel_complete_tx_dma) from [<c01fe4ac>] (at_xdmac_tasklet+0x14c/0x1ac) [<c01fe4ac>] (at_xdmac_tasklet) from [<c001de58>] (tasklet_action+0x68/0xb4) [<c001de58>] (tasklet_action) from [<c001dfdc>] (__do_softirq+0xfc/0x238) [<c001dfdc>] (__do_softirq) from [<c001e140>] (run_ksoftirqd+0x28/0x34) [<c001e140>] (run_ksoftirqd) from [<c0033a3c>] (smpboot_thread_fn+0x138/0x18c) [<c0033a3c>] (smpboot_thread_fn) from [<c0030e7c>] (kthread+0xdc/0xf0) [<c0030e7c>] (kthread) from [<c000f480>] (ret_from_fork+0x14/0x34) ---[ end trace b57b14a99c1d8812 ]--- It comes from the fact that devices can called some code from the DMA controller with irq disabled. _bh variant is not intended to be used in this case since it can enable irqs. Switch to irqsave/irqrestore variant to avoid this situation. Signed-off-by: Ludovic Desroches <[email protected]> Cc: [email protected] # 4.0 and later Signed-off-by: Vinod Koul <[email protected]>
davet321
pushed a commit
to davet321/rpi-linux
that referenced
this issue
Jun 23, 2015
commit 4c374fc upstream. Using _bh variant for spin locks causes this kind of warning: Starting logging: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3 at /ssd_drive/linux/kernel/softirq.c:151 __local_bh_enable_ip+0xe8/0xf4() Modules linked in: CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.1.0-rc2+ raspberrypi#94 Hardware name: Atmel SAMA5 [<c0013c04>] (unwind_backtrace) from [<c00118a4>] (show_stack+0x10/0x14) [<c00118a4>] (show_stack) from [<c001bbcc>] (warn_slowpath_common+0x80/0xac) [<c001bbcc>] (warn_slowpath_common) from [<c001bc14>] (warn_slowpath_null+0x1c/0x24) [<c001bc14>] (warn_slowpath_null) from [<c001e28c>] (__local_bh_enable_ip+0xe8/0xf4) [<c001e28c>] (__local_bh_enable_ip) from [<c01fdbd0>] (at_xdmac_device_terminate_all+0xf4/0x100) [<c01fdbd0>] (at_xdmac_device_terminate_all) from [<c02221a4>] (atmel_complete_tx_dma+0x34/0xf4) [<c02221a4>] (atmel_complete_tx_dma) from [<c01fe4ac>] (at_xdmac_tasklet+0x14c/0x1ac) [<c01fe4ac>] (at_xdmac_tasklet) from [<c001de58>] (tasklet_action+0x68/0xb4) [<c001de58>] (tasklet_action) from [<c001dfdc>] (__do_softirq+0xfc/0x238) [<c001dfdc>] (__do_softirq) from [<c001e140>] (run_ksoftirqd+0x28/0x34) [<c001e140>] (run_ksoftirqd) from [<c0033a3c>] (smpboot_thread_fn+0x138/0x18c) [<c0033a3c>] (smpboot_thread_fn) from [<c0030e7c>] (kthread+0xdc/0xf0) [<c0030e7c>] (kthread) from [<c000f480>] (ret_from_fork+0x14/0x34) ---[ end trace b57b14a99c1d8812 ]--- It comes from the fact that devices can called some code from the DMA controller with irq disabled. _bh variant is not intended to be used in this case since it can enable irqs. Switch to irqsave/irqrestore variant to avoid this situation. Signed-off-by: Ludovic Desroches <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
artynet
pushed a commit
to artynet/rpi-linux
that referenced
this issue
Apr 3, 2019
commit c4efe48 upstream. When start_isolate_page_range() returned -EBUSY in __offline_pages(), it calls memory_notify(MEM_CANCEL_OFFLINE, &arg) with an uninitialized "arg". As the result, it triggers warnings below. Also, it is only necessary to notify MEM_CANCEL_OFFLINE after MEM_GOING_OFFLINE. page:ffffea0001200000 count:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x3fffe000001000(reserved) raw: 003fffe000001000 ffffea0001200008 ffffea0001200008 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: unmovable page WARNING: CPU: 25 PID: 1665 at mm/kasan/common.c:665 kasan_mem_notifier+0x34/0x23b CPU: 25 PID: 1665 Comm: bash Tainted: G W 5.0.0+ raspberrypi#94 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:kasan_mem_notifier+0x34/0x23b RSP: 0018:ffff8883ec737890 EFLAGS: 00010206 RAX: 0000000000000246 RBX: ff10f0f4435f1000 RCX: f887a7a21af88000 RDX: dffffc0000000000 RSI: 0000000000000020 RDI: ffff8881f221af88 RBP: ffff8883ec737898 R08: ffff888000000000 R09: ffffffffb0bddcd0 R10: ffffed103e857088 R11: ffff8881f42b8443 R12: dffffc0000000000 R13: 00000000fffffff9 R14: dffffc0000000000 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fbd31d730 CR3: 00000004049c6003 CR4: 00000000001606a0 Call Trace: notifier_call_chain+0xbf/0x130 __blocking_notifier_call_chain+0x76/0xc0 blocking_notifier_call_chain+0x16/0x20 memory_notify+0x1b/0x20 __offline_pages+0x3e2/0x1210 offline_pages+0x11/0x20 memory_block_action+0x144/0x300 memory_subsys_offline+0xe5/0x170 device_offline+0x13f/0x1e0 state_store+0xeb/0x110 dev_attr_store+0x3f/0x70 sysfs_kf_write+0x104/0x150 kernfs_fop_write+0x25c/0x410 __vfs_write+0x66/0x120 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xb78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f14f75cc3b8 RSP: 002b:00007ffe84d01d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f14f75cc3b8 RDX: 0000000000000008 RSI: 0000563f8e433d70 RDI: 0000000000000001 RBP: 0000563f8e433d70 R08: 000000000000000a R09: 00007ffe84d018f0 R10: 000000000000000a R11: 0000000000000246 R12: 00007f14f789e780 R13: 0000000000000008 R14: 00007f14f7899740 R15: 0000000000000008 Link: http://lkml.kernel.org/r/[email protected] Fixes: 7960509 ("mm, memory_hotplug: print reason for the offlining failure") Reviewed-by: Oscar Salvador <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Qian Cai <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: <[email protected]> [5.0.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Dec 13, 2019
commit ad5996d upstream. Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug where nVMX derefences ->memslots without holding ->srcu or ->slots_lock. The other half of nested migration, ->get_nested_state(), does not need to acquire ->srcu as it is a purely a dump of internal KVM (and CPU) state to userspace. Detected as an RCU lockdep splat that is 100% reproducible by running KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the failing function, kvm_is_visible_gfn(), is only checking the validity of a gfn, it's not actually accessing guest memory (which is more or less unsupported during vmx_set_nested_state() due to incorrect MMU state), i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any case, setting nested state isn't a fast path so there's no reason to go out of our way to avoid taking ->srcu. ============================= WARNING: suspicious RCU usage 5.4.0-rc7+ #94 Not tainted ----------------------------- include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/10939: #0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm] stack backtrace: CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x68/0x9b kvm_is_visible_gfn+0x179/0x180 [kvm] mmu_check_root+0x11/0x30 [kvm] fast_cr3_switch+0x40/0x120 [kvm] kvm_mmu_new_cr3+0x34/0x60 [kvm] nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel] nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel] vmx_set_nested_state+0x256/0x340 [kvm_intel] kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm] kvm_vcpu_ioctl+0xde/0x630 [kvm] do_vfs_ioctl+0xa2/0x6c0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f59a2b95f47 Fixes: 8fcc4b5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Dec 13, 2019
commit ad5996d upstream. Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug where nVMX derefences ->memslots without holding ->srcu or ->slots_lock. The other half of nested migration, ->get_nested_state(), does not need to acquire ->srcu as it is a purely a dump of internal KVM (and CPU) state to userspace. Detected as an RCU lockdep splat that is 100% reproducible by running KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the failing function, kvm_is_visible_gfn(), is only checking the validity of a gfn, it's not actually accessing guest memory (which is more or less unsupported during vmx_set_nested_state() due to incorrect MMU state), i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any case, setting nested state isn't a fast path so there's no reason to go out of our way to avoid taking ->srcu. ============================= WARNING: suspicious RCU usage 5.4.0-rc7+ #94 Not tainted ----------------------------- include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/10939: #0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm] stack backtrace: CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x68/0x9b kvm_is_visible_gfn+0x179/0x180 [kvm] mmu_check_root+0x11/0x30 [kvm] fast_cr3_switch+0x40/0x120 [kvm] kvm_mmu_new_cr3+0x34/0x60 [kvm] nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel] nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel] vmx_set_nested_state+0x256/0x340 [kvm_intel] kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm] kvm_vcpu_ioctl+0xde/0x630 [kvm] do_vfs_ioctl+0xa2/0x6c0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f59a2b95f47 Fixes: 8fcc4b5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Dec 13, 2019
commit ad5996d upstream. Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug where nVMX derefences ->memslots without holding ->srcu or ->slots_lock. The other half of nested migration, ->get_nested_state(), does not need to acquire ->srcu as it is a purely a dump of internal KVM (and CPU) state to userspace. Detected as an RCU lockdep splat that is 100% reproducible by running KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the failing function, kvm_is_visible_gfn(), is only checking the validity of a gfn, it's not actually accessing guest memory (which is more or less unsupported during vmx_set_nested_state() due to incorrect MMU state), i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any case, setting nested state isn't a fast path so there's no reason to go out of our way to avoid taking ->srcu. ============================= WARNING: suspicious RCU usage 5.4.0-rc7+ #94 Not tainted ----------------------------- include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/10939: #0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm] stack backtrace: CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x68/0x9b kvm_is_visible_gfn+0x179/0x180 [kvm] mmu_check_root+0x11/0x30 [kvm] fast_cr3_switch+0x40/0x120 [kvm] kvm_mmu_new_cr3+0x34/0x60 [kvm] nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel] nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel] vmx_set_nested_state+0x256/0x340 [kvm_intel] kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm] kvm_vcpu_ioctl+0xde/0x630 [kvm] do_vfs_ioctl+0xa2/0x6c0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f59a2b95f47 Fixes: 8fcc4b5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Apr 19, 2021
[ Upstream commit 62e69bc ] lmc set sc->lmc_media pointer when there is a matching device. However, when no matching device is found, this pointer is NULL and the following dereference will result in a null-ptr-deref. To fix this issue, unregister the hdlc device and return an error. [ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95 [ 4.570102] [ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94 [ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4 [ 4.571125] Call Trace: [ 4.571261] dump_stack+0x7d/0xa3 [ 4.571445] kasan_report.cold+0x10c/0x10e [ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc] [ 4.572432] local_pci_probe+0x6f/0xb0 [ 4.572639] pci_device_probe+0x171/0x240 [ 4.572857] ? pci_device_remove+0xe0/0xe0 [ 4.573080] ? kernfs_create_link+0xb6/0x110 [ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.573598] really_probe+0x161/0x420 [ 4.573799] driver_probe_device+0x6d/0xd0 [ 4.574022] device_driver_attach+0x82/0x90 [ 4.574249] ? device_driver_attach+0x90/0x90 [ 4.574485] __driver_attach+0x60/0x100 [ 4.574694] ? device_driver_attach+0x90/0x90 [ 4.574931] bus_for_each_dev+0xe1/0x140 [ 4.575146] ? subsys_dev_iter_exit+0x10/0x10 [ 4.575387] ? klist_node_init+0x61/0x80 [ 4.575602] bus_add_driver+0x254/0x2a0 [ 4.575812] driver_register+0xd3/0x150 [ 4.576021] ? 0xffffffffc0018000 [ 4.576202] do_one_initcall+0x84/0x250 [ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.576733] ? unpoison_range+0xf/0x30 [ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.577219] ? unpoison_range+0xf/0x30 [ 4.577423] ? unpoison_range+0xf/0x30 [ 4.577628] do_init_module+0xf8/0x350 [ 4.577833] load_module+0x3fe6/0x4340 [ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.578526] ? module_frob_arch_sections+0x20/0x20 [ 4.578787] ? __do_sys_finit_module+0x108/0x170 [ 4.579037] __do_sys_finit_module+0x108/0x170 [ 4.579278] ? __ia32_sys_init_module+0x40/0x40 [ 4.579523] ? file_open_root+0x200/0x200 [ 4.579742] ? do_sys_open+0x85/0xe0 [ 4.579938] ? filp_open+0x50/0x50 [ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130 [ 4.580390] do_syscall_64+0x33/0x40 [ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.580859] RIP: 0033:0x7f1a724c3cf7 [ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891 [ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7 [ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003 [ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0 [ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001 [ 4.584349] ================================================================== Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Apr 19, 2021
[ Upstream commit 62e69bc ] lmc set sc->lmc_media pointer when there is a matching device. However, when no matching device is found, this pointer is NULL and the following dereference will result in a null-ptr-deref. To fix this issue, unregister the hdlc device and return an error. [ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95 [ 4.570102] [ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94 [ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4 [ 4.571125] Call Trace: [ 4.571261] dump_stack+0x7d/0xa3 [ 4.571445] kasan_report.cold+0x10c/0x10e [ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc] [ 4.572432] local_pci_probe+0x6f/0xb0 [ 4.572639] pci_device_probe+0x171/0x240 [ 4.572857] ? pci_device_remove+0xe0/0xe0 [ 4.573080] ? kernfs_create_link+0xb6/0x110 [ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.573598] really_probe+0x161/0x420 [ 4.573799] driver_probe_device+0x6d/0xd0 [ 4.574022] device_driver_attach+0x82/0x90 [ 4.574249] ? device_driver_attach+0x90/0x90 [ 4.574485] __driver_attach+0x60/0x100 [ 4.574694] ? device_driver_attach+0x90/0x90 [ 4.574931] bus_for_each_dev+0xe1/0x140 [ 4.575146] ? subsys_dev_iter_exit+0x10/0x10 [ 4.575387] ? klist_node_init+0x61/0x80 [ 4.575602] bus_add_driver+0x254/0x2a0 [ 4.575812] driver_register+0xd3/0x150 [ 4.576021] ? 0xffffffffc0018000 [ 4.576202] do_one_initcall+0x84/0x250 [ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.576733] ? unpoison_range+0xf/0x30 [ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.577219] ? unpoison_range+0xf/0x30 [ 4.577423] ? unpoison_range+0xf/0x30 [ 4.577628] do_init_module+0xf8/0x350 [ 4.577833] load_module+0x3fe6/0x4340 [ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.578526] ? module_frob_arch_sections+0x20/0x20 [ 4.578787] ? __do_sys_finit_module+0x108/0x170 [ 4.579037] __do_sys_finit_module+0x108/0x170 [ 4.579278] ? __ia32_sys_init_module+0x40/0x40 [ 4.579523] ? file_open_root+0x200/0x200 [ 4.579742] ? do_sys_open+0x85/0xe0 [ 4.579938] ? filp_open+0x50/0x50 [ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130 [ 4.580390] do_syscall_64+0x33/0x40 [ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.580859] RIP: 0033:0x7f1a724c3cf7 [ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891 [ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7 [ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003 [ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0 [ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001 [ 4.584349] ================================================================== Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
alsutton
pushed a commit
to alsutton/rpi-linux
that referenced
this issue
Apr 20, 2021
[ Upstream commit 62e69bc ] lmc set sc->lmc_media pointer when there is a matching device. However, when no matching device is found, this pointer is NULL and the following dereference will result in a null-ptr-deref. To fix this issue, unregister the hdlc device and return an error. [ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95 [ 4.570102] [ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 raspberrypi#94 [ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4 [ 4.571125] Call Trace: [ 4.571261] dump_stack+0x7d/0xa3 [ 4.571445] kasan_report.cold+0x10c/0x10e [ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc] [ 4.572432] local_pci_probe+0x6f/0xb0 [ 4.572639] pci_device_probe+0x171/0x240 [ 4.572857] ? pci_device_remove+0xe0/0xe0 [ 4.573080] ? kernfs_create_link+0xb6/0x110 [ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.573598] really_probe+0x161/0x420 [ 4.573799] driver_probe_device+0x6d/0xd0 [ 4.574022] device_driver_attach+0x82/0x90 [ 4.574249] ? device_driver_attach+0x90/0x90 [ 4.574485] __driver_attach+0x60/0x100 [ 4.574694] ? device_driver_attach+0x90/0x90 [ 4.574931] bus_for_each_dev+0xe1/0x140 [ 4.575146] ? subsys_dev_iter_exit+0x10/0x10 [ 4.575387] ? klist_node_init+0x61/0x80 [ 4.575602] bus_add_driver+0x254/0x2a0 [ 4.575812] driver_register+0xd3/0x150 [ 4.576021] ? 0xffffffffc0018000 [ 4.576202] do_one_initcall+0x84/0x250 [ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.576733] ? unpoison_range+0xf/0x30 [ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.577219] ? unpoison_range+0xf/0x30 [ 4.577423] ? unpoison_range+0xf/0x30 [ 4.577628] do_init_module+0xf8/0x350 [ 4.577833] load_module+0x3fe6/0x4340 [ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.578526] ? module_frob_arch_sections+0x20/0x20 [ 4.578787] ? __do_sys_finit_module+0x108/0x170 [ 4.579037] __do_sys_finit_module+0x108/0x170 [ 4.579278] ? __ia32_sys_init_module+0x40/0x40 [ 4.579523] ? file_open_root+0x200/0x200 [ 4.579742] ? do_sys_open+0x85/0xe0 [ 4.579938] ? filp_open+0x50/0x50 [ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130 [ 4.580390] do_syscall_64+0x33/0x40 [ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.580859] RIP: 0033:0x7f1a724c3cf7 [ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891 [ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7 [ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003 [ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0 [ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001 [ 4.584349] ================================================================== Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
herrnst
pushed a commit
to herrnst/linux-raspberrypi
that referenced
this issue
May 13, 2022
Since commit f1131b9 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [raspberrypi#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty raspberrypi#94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: [email protected] Fixes: f1131b9 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
herrnst
pushed a commit
to herrnst/linux-raspberrypi
that referenced
this issue
May 21, 2022
commit e333eed upstream. Since commit f1131b9 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [raspberrypi#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty raspberrypi#94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: [email protected] Fixes: f1131b9 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
May 23, 2022
commit e333eed upstream. Since commit f1131b9 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: [email protected] Fixes: f1131b9 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Jan 30, 2023
The DRM fbdev emulation layer sets the struct fb_info .fbdefio field to a struct fb_deferred_io pointer, that is shared across all drivers that use the generic drm_fbdev_generic_setup() helper function. It is a problem because the fbdev core deferred I/O logic assumes that the struct fb_deferred_io data is not shared between devices, and it's stored there state such as the list of pages touched and a mutex that is use to synchronize between the fb_deferred_io_track_page() function that track the dirty pages and fb_deferred_io_work() workqueue handler doing the actual deferred I/O. The latter can lead to the following error, since it may happen that two drivers are probed and then one is removed, which causes the mutex bo be destroyed and not existing anymore by the time the other driver tries to grab it for the fbdev deferred I/O logic: [ 369.756553] ------------[ cut here ]------------ [ 369.756604] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 369.756631] WARNING: CPU: 2 PID: 1023 at kernel/locking/mutex.c:582 __mutex_lock+0x348/0x424 [ 369.756744] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip v6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr btsdio bluetooth sunrpc brcmfmac snd_soc_hdmi_codec cpufreq_dt cfg80211 vfat fat vc4 rfkill brcmutil raspberrypi_cpufreq i2c_bcm2835 iproc_rng200 bcm2711_thermal snd_soc_core snd_pcm_dmaen gine leds_gpio nvmem_rmem joydev hid_cherry uas usb_storage gpio_raspberrypi_exp v3d snd_pcm raspberrypi_hwmon gpu_sched bcm2835_wdt broadcom bcm_phy_lib snd_timer genet snd mdio_bcm_unimac clk_bcm2711_dvp soundcore drm_display_helper pci e_brcmstb cec ip6_tables ip_tables fuse [ 369.757400] CPU: 2 PID: 1023 Comm: fbtest Not tainted 5.19.0-rc6+ #94 [ 369.757455] Hardware name: raspberrypi,4-model-b Raspberry Pi 4 Model B Rev 1.4/Raspberry Pi 4 Model B Rev 1.4, BIOS 2022.10 10/01/2022 [ 369.757538] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 369.757596] pc : __mutex_lock+0x348/0x424 [ 369.757635] lr : __mutex_lock+0x348/0x424 [ 369.757672] sp : ffff80000953bb00 [ 369.757703] x29: ffff80000953bb00 x28: ffff17fdc087c000 x27: 0000000000000002 [ 369.757771] x26: ffff17fdc349f9b0 x25: fffffc5ff72e0100 x24: 0000000000000000 [ 369.757838] x23: 0000000000000000 x22: 0000000000000002 x21: ffffa618df636f10 [ 369.757903] x20: ffff80000953bb68 x19: ffffa618e0f18138 x18: 0000000000000001 [ 369.757968] x17: 0000000020000000 x16: 0000000000000002 x15: 0000000000000000 [ 369.758032] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 [ 369.758097] x11: 00000000ffffdfff x10: ffffa618e0c79f88 x9 : ffffa618de472484 [ 369.758162] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 00000000000affa8 [ 369.758227] x5 : 0000000000001fff x4 : 0000000000000000 x3 : 0000000000000027 [ 369.758292] x2 : 0000000000000001 x1 : ffff17fdc087c000 x0 : 0000000000000028 [ 369.758357] Call trace: [ 369.758383] __mutex_lock+0x348/0x424 [ 369.758420] mutex_lock_nested+0x4c/0x5c [ 369.758459] fb_deferred_io_mkwrite+0x78/0x1d8 [ 369.758507] do_page_mkwrite+0x5c/0x19c [ 369.758550] wp_page_shared+0x70/0x1a0 [ 369.758590] do_wp_page+0x3d0/0x510 [ 369.758628] handle_pte_fault+0x1c0/0x1e0 [ 369.758670] __handle_mm_fault+0x250/0x380 [ 369.758712] handle_mm_fault+0x17c/0x3a4 [ 369.758753] do_page_fault+0x158/0x530 [ 369.758792] do_mem_abort+0x50/0xa0 [ 369.758831] el0_da+0x78/0x19c [ 369.758864] el0t_64_sync_handler+0xbc/0x150 [ 369.758904] el0t_64_sync+0x190/0x194 [ 369.758942] irq event stamp: 11395 [ 369.758973] hardirqs last enabled at (11395): [<ffffa618de472554>] __up_console_sem+0x74/0x80 [ 369.759042] hardirqs last disabled at (11394): [<ffffa618de47254c>] __up_console_sem+0x6c/0x80 [ 369.760554] softirqs last enabled at (11392): [<ffffa618de330a74>] __do_softirq+0x4c4/0x6b8 [ 369.762060] softirqs last disabled at (11383): [<ffffa618de3c9124>] __irq_exit_rcu+0x104/0x214 [ 369.763564] ---[ end trace 0000000000000000 ]--- Fixes: d536540 ("drm/fb-helper: Add generic fbdev emulation .fb_probe function") Signed-off-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
0lxb
pushed a commit
to 0lxb/rpi_linux
that referenced
this issue
Jan 30, 2024
popcornmix
pushed a commit
that referenced
this issue
Aug 22, 2024
[ Upstream commit 305a517 ] Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata. Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Aug 22, 2024
[ Upstream commit 305a517 ] Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata. Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I saw that there is a 3.2.27 branch. Is this stable? rpi-patches branch will remain at 3.1.9? What is master used for? I see that 3.2.27 is the base branch.
Thanks.
The text was updated successfully, but these errors were encountered: