Documentation for event loop implementations

README.md

@@ -18,7 +18,25 @@ For the code of the current stable 0.4.x release, checkout the
 
 * [Quickstart example](#quickstart-example)
 * [Usage](#usage)
-* [Loop implementations](#loop-implementations)
+  * [Factory](#factory)
+    * [create()](#create)
+  * [Loop implementations](#loop-implementations)
+    * [StreamSelectLoop](#streamselectloop)
+    * [LibEventLoop](#libeventloop)
+    * [LibEvLoop](#libevloop)
+    * [ExtEventLoop](#exteventloop)
+  * [LoopInterface](#loopinterface)
+    * [addtimer()](#addtimer)
+    * [addPeriodicTimer()](#addperiodictimer)
+    * [cancelTimer()](#canceltimer)
+    * [isTimerActive()](#istimeractive)
+    * [futureTick()](#futuretick)
+    * [addSignal()](#addsignal)
+    * [removeSignal()](#removesignal)
+    * [addReadStream()](#addreadstream)
+    * [addWriteStream()](#addwritestream)
+    * [removeReadStream()](#removereadstream)
+    * [removeWriteStream()](#removewritestream)
 * [Install](#install)
 * [Tests](#tests)
 * [License](#license)
@@ -94,49 +112,115 @@ $loop->run();
    purposes.
 3. The loop is run with a single `$loop->run()` call at the end of the program.
 
-## Factory
+### Factory
 
 The `Factory` class exists as a convenient way to pick the best available
-[loop implementation](#loop-implementations).
+[event loop implementation](#loop-implementations).
 
-The `create(): LoopInterface` method can be used to create a new loop
+#### create()
+
+The `create(): LoopInterface` method can be used to create a new event loop
 instance:
 
 ```php
 $loop = React\EventLoop\Factory::create();
 ```
 
-This method always returns an instance implementing `LoopInterface`,
-the actual loop implementation is an implementation detail.
+This method always returns an instance implementing [`LoopInterface`](#loopinterface),
+the actual [event loop implementation](#loop-implementations) is an implementation detail.
 
 This method should usually only be called once at the beginning of the program.
 
-## Loop implementations
-
-In addition to the interface there are the following implementations provided:
-
-* `StreamSelectLoop`: This is the only implementation which works out of the
-  box with PHP. It does a simple `select` system call. It's not the most
-  performant of loops, but still does the job quite well.
-
-* `LibEventLoop`: This uses the `libevent` pecl extension. `libevent` itself
-  supports a number of system-specific backends (epoll, kqueue).
+### Loop implementations
 
-* `LibEvLoop`: This uses the `libev` pecl extension
-  ([github](https://github.com/m4rw3r/php-libev)). It supports the same
-  backends as libevent.
+In addition to the [`LoopInterface`](#loopinterface), there are a number of
+event loop implementations provided.
 
-* `ExtEventLoop`: This uses the `event` pecl extension. It supports the same
-  backends as libevent.
-
-All of the loops support these features:
+All of the event loops support these features:
 
 * File descriptor polling
 * One-off timers
 * Periodic timers
 * Deferred execution on future loop tick
 
-### addTimer()
+For most consumers of this package, the underlying event loop implementation is
+an implementation detail.
+You should use the [`Factory`](#factory) to automatically create a new instance.
+
+Advanced! If you explicitly need a certain event loop implementation, you can
+manually instantiate one of the following classes.
+Note that you may have to install the required PHP extensions for the respective
+event loop implementation first or this may result in a fatal error.
+
+#### StreamSelectLoop
+
+A `stream_select()` based event loop.
+
+This uses the [`stream_select()`](http://php.net/manual/en/function.stream-select.php)
+function and is the only implementation which works out of the box with PHP.
+
+This event loop works out of the box on PHP 5.4 through PHP 7+ and HHVM.
+This means that no installation is required and this library works on all
+platforms and supported PHP versions.
+Accordingly, the [`Factory`](#factory) will use this event loop by default if
+you do not install any of the event loop extensions listed below.
+
+Under the hood, it does a simple `select` system call.
+This system call is limited to the maximum file descriptor number of
+`FD_SETSIZE` (platform dependent, commonly 1024) and scales with `O(m)`
+(`m` being the maximum file descriptor number passed).
+This means that you may run into issues when handling thousands of streams
+concurrently and you may want to look into using one of the alternative
+event loop implementations listed below in this case.
+If your use case is among the many common use cases that involve handling only
+dozens or a few hundred streams at once, then this event loop implementation
+performs really well.
+
+If you want to use signal handling (see also [`addSignal()`](#addsignal) below),
+this event loop implementation requires `ext-pcntl`.
+This extension is only available for Unix-like platforms and does not support
+Windows.
+It is commonly installed as part of many PHP distributions.
+If this extension is missing (or you're running on Windows), signal handling is
+not supported and throws a `BadMethodCallException` instead.
+
+#### LibEventLoop
+
+An `ext-libevent` based event loop.
+
+This uses the [`libevent` PECL extension](https://pecl.php.net/package/libevent).
+`libevent` itself supports a number of system-specific backends (epoll, kqueue).
+
+This event loop does only work with PHP 5.
+An [unofficial update](https://github.com/php/pecl-event-libevent/pull/2) for
+PHP 7 does exist, but it is known to cause regular crashes due to `SEGFAULT`s.
+To reiterate: Using this event loop on PHP 7 is not recommended.
+Accordingly, the [`Factory`](#factory) will not try to use this event loop on
+PHP 7.
+
+#### LibEvLoop
+
+An `ext-libev` based event loop.
+
+This uses an [unofficial `libev` extension](https://github.com/m4rw3r/php-libev).
+It supports the same backends as libevent.
+
+This loop does only work with PHP 5.
+An update for PHP 7 is [unlikely](https://github.com/m4rw3r/php-libev/issues/8)
+to happen any time soon.
+
+#### ExtEventLoop
+
+An `ext-event` based event loop.
+
+This uses the [`event` PECL extension](https://pecl.php.net/package/event).
+It supports the same backends as libevent.
+
+This loop is known to work with PHP 5.4 through PHP 7+.
+
+### LoopInterface
+
+#### addTimer()
 
 The `addTimer(float $interval, callable $callback): TimerInterface` method can be used to
 enqueue a callback to be invoked once after the given interval.
@@ -183,7 +267,7 @@ hello('Tester', $loop);
 The execution order of timers scheduled to execute at the same time is
 not guaranteed.
 
-### addPeriodicTimer()
+#### addPeriodicTimer()
 
 The `addPeriodicTimer(float $interval, callable $callback): TimerInterface` method can be used to
 enqueue a callback to be invoked repeatedly after the given interval.
@@ -237,7 +321,7 @@ hello('Tester', $loop);
 The execution order of timers scheduled to execute at the same time is
 not guaranteed.
 
-### cancelTimer()
+#### cancelTimer()
 
 The `cancelTimer(TimerInterface $timer): void` method can be used to
 cancel a pending timer.
@@ -252,7 +336,7 @@ Calling this method on a timer instance that has not been added to this
 loop instance or on a timer that is not "active" (or has already been
 cancelled) has no effect.
 
-### isTimerActive()
+#### isTimerActive()
 
 The `isTimerActive(TimerInterface $timer): bool` method can be used to
 check if a given timer is active.
@@ -262,7 +346,7 @@ via [`addTimer()`](#addtimer) or [`addPeriodicTimer()`](#addperiodictimer)
 and has not been cancelled via [`cancelTimer()`](#canceltimer) and is not
 a non-periodic timer that has already been triggered after its interval.
 
-### futureTick()
+#### futureTick()
 
 The `futureTick(callable $listener): void` method can be used to
 schedule a callback to be invoked on a future tick of the event loop.
@@ -310,7 +394,7 @@ echo 'a';
 
 See also [example #3](examples).
 
-### addSignal()
+#### addSignal()
 
 The `addSignal(int $signal, callable $listener): void` method can be used to
 register a listener to be notified when a signal has been caught by this process.
@@ -344,7 +428,7 @@ missing.
 **Note: A listener can only be added once to the same signal, any
 attempts to add it more then once will be ignored.**
 
-### removeSignal()
+#### removeSignal()
 
 The `removeSignal(int $signal, callable $listener): void` method can be used to
 remove a previously added signal listener.
@@ -355,7 +439,7 @@ $loop->removeSignal(SIGINT, $listener);
 
 Any attempts to remove listeners that aren't registered will be ignored.
 
-### addReadStream()
+#### addReadStream()
 
 > Advanced! Note that this low-level API is considered advanced usage.
   Most use cases should probably use the higher-level
@@ -398,7 +482,7 @@ read event listener for this stream.
 The execution order of listeners when multiple streams become ready at
 the same time is not guaranteed.
 
-### addWriteStream()
+#### addWriteStream()
 
 > Advanced! Note that this low-level API is considered advanced usage.
   Most use cases should probably use the higher-level
@@ -441,15 +525,15 @@ write event listener for this stream.
 The execution order of listeners when multiple streams become ready at
 the same time is not guaranteed.
 
-### removeReadStream()
+#### removeReadStream()
 
 The `removeReadStream(resource $stream): void` method can be used to
 remove the read event listener for the given stream.
 
 Removing a stream from the loop that has already been removed or trying
 to remove a stream that was never added or is invalid has no effect.
 
-### removeWriteStream()
+#### removeWriteStream()
 
 The `removeWriteStream(resource $stream): void` method can be used to
 remove the write event listener for the given stream.
@@ -468,6 +552,14 @@ This will install the latest supported version:
 $ composer require react/event-loop
 ```
 
+This project aims to run on any platform and thus does not require any PHP
+extensions and supports running on legacy PHP 5.4 through current PHP 7+ and
+HHVM.
+It's *highly recommended to use PHP 7+* for this project.
+
+Installing any of the event loop extensions is suggested, but entirely optional.
+See also [event loop implementations](#loop-implementations) for more details.
+
 ## Tests
 
 To run the test suite, you first need to clone this repo and then install all

src/ExtEventLoop.php

@@ -11,7 +11,14 @@
 use SplObjectStorage;
 
 /**
- * An ext-event based event-loop.
+ * An `ext-event` based event loop.
+ *
+ * This uses the [`event` PECL extension](https://pecl.php.net/package/event).
+ * It supports the same backends as libevent.
+ *
+ * This loop is known to work with PHP 5.4 through PHP 7+.
+ *
+ * @link https://pecl.php.net/package/event
  */
 class ExtEventLoop implements LoopInterface
 {

src/Factory.php

@@ -3,19 +3,19 @@
 namespace React\EventLoop;
 
 /**
- * The `Factory` class exists as a convenient way to pick the best available loop implementation.
+ * The `Factory` class exists as a convenient way to pick the best available event loop implementation.
  */
 class Factory
 {
     /**
-     * Creates a new loop instance
+     * Creates a new event loop instance
      *
      * ```php
      * $loop = React\EventLoop\Factory::create();
      * ```
      *
      * This method always returns an instance implementing `LoopInterface`,
-     * the actual loop implementation is an implementation detail.
+     * the actual event loop implementation is an implementation detail.
      *
      * This method should usually only be called once at the beginning of the program.
      *

src/LibEvLoop.php

@@ -12,6 +12,15 @@
 use SplObjectStorage;
 
 /**
+ * An `ext-libev` based event loop.
+ *
+ * This uses an [unofficial `libev` extension](https://github.com/m4rw3r/php-libev).
+ * It supports the same backends as libevent.
+ *
+ * This loop does only work with PHP 5.
+ * An update for PHP 7 is [unlikely](https://github.com/m4rw3r/php-libev/issues/8)
+ * to happen any time soon.
+ *
  * @see https://github.com/m4rw3r/php-libev
  * @see https://gist.github.com/1688204
  */

src/LibEventLoop.php

@@ -10,7 +10,19 @@
 use SplObjectStorage;
 
 /**
- * An ext-libevent based event-loop.
+ * An `ext-libevent` based event loop.
+ *
+ * This uses the [`libevent` PECL extension](https://pecl.php.net/package/libevent).
+ * `libevent` itself supports a number of system-specific backends (epoll, kqueue).
+ *
+ * This event loop does only work with PHP 5.
+ * An [unofficial update](https://github.com/php/pecl-event-libevent/pull/2) for
+ * PHP 7 does exist, but it is known to cause regular crashes due to `SEGFAULT`s.
+ * To reiterate: Using this event loop on PHP 7 is not recommended.
+ * Accordingly, the [`Factory`](#factory) will not try to use this event loop on
+ * PHP 7.
+ *
+ * @link https://pecl.php.net/package/libevent
  */
 class LibEventLoop implements LoopInterface
 {

src/StreamSelectLoop.php

@@ -9,7 +9,37 @@
 use React\EventLoop\Timer\Timers;
 
 /**
- * A stream_select() based event-loop.
+ * A `stream_select()` based event loop.
+ *
+ * This uses the [`stream_select()`](http://php.net/manual/en/function.stream-select.php)
+ * function and is the only implementation which works out of the box with PHP.
+ *
+ * This event loop works out of the box on PHP 5.4 through PHP 7+ and HHVM.
+ * This means that no installation is required and this library works on all
+ * platforms and supported PHP versions.
+ * Accordingly, the [`Factory`](#factory) will use this event loop by default if
+ * you do not install any of the event loop extensions listed below.
+ *
+ * Under the hood, it does a simple `select` system call.
+ * This system call is limited to the maximum file descriptor number of
+ * `FD_SETSIZE` (platform dependent, commonly 1024) and scales with `O(m)`
+ * (`m` being the maximum file descriptor number passed).
+ * This means that you may run into issues when handling thousands of streams
+ * concurrently and you may want to look into using one of the alternative
+ * event loop implementations listed below in this case.
+ * If your use case is among the many common use cases that involve handling only
+ * dozens or a few hundred streams at once, then this event loop implementation
+ * performs really well.
+ *
+ * If you want to use signal handling (see also [`addSignal()`](#addsignal) below),
+ * this event loop implementation requires `ext-pcntl`.
+ * This extension is only available for Unix-like platforms and does not support
+ * Windows.
+ * It is commonly installed as part of many PHP distributions.
+ * If this extension is missing (or you're running on Windows), signal handling is
+ * not supported and throws a `BadMethodCallException` instead.
+ *
+ * @link http://php.net/manual/en/function.stream-select.php
  */
 class StreamSelectLoop implements LoopInterface
 {